- Replaces c-clamps
- Ergonomic wood grip handle
- Lighter duty clamp for delicate projects
- Protective cap prevents damage to material
-
General Hand Tools (9)
-
Clamping (30)
-
Sharpening (1)
-
Vises (1)
-
Wheel & Circle Cutters (3)
-
- Designed to cut steel, angle iron, sheet metal and other ferrous metal products, Swift Cut (Registered Trademark)
- Resin bonded Aluminum-Oxide grain for faster cutting, Type 1 blade - for cutting only
- Blade double reinforced with fiberglass mesh for durability and safety
- Arbor reinforced with metal for extra strength
- Diameter: 4-inch, Width: 3/32-inch, Arbor: 5/8-inch, Max RPM: 15300
- You are purchasing one five pack.
-
These sturdy auxiliary clamps slide into the T-channel of the clamp track and lock into place, turning your clamp edge into a solid vise. This allows any material you are working on to be safely held in place as you glue, sand, finish, or even go to work with your router.
-
-
Out of stock
-
If you're planning on making a sliding jig or fixture for your woodworking shop, the INCRA Miter Slider is exactly what you need. These inexpensive aluminum runners adjust for PERFECT sliding action in any standard (or near standard) 3/4" by 3/8" miter gauge slot with just a twist of the wrist. They lock firmly in place with another twist of the wrist. Won't warp, shrink or swell like wooden runners. Includes plans for a wide variety of shop-made jigs and fixtures. Anodized aluminum for durability and beauty. Available in 18" and 24" lengths. Eliminate the tedious process of making, fitting and adjusting the wooden runners on your sliding table saw jigs. Just screw these special extruded aluminum runners to your jigs and you're ready. Miter sliders have unique expansion mechanisms in their body that perfectly adjust to any standard 3/4" x 3/8" miter gauge slot. Each Slider includes plans for building a variety of table saw jigs.
-
-
Why trust the operation of your Incra Miter Gauge or Miter Slider in just any miter track. The Miter Channel was designed with the same Incra quality and precision to act as the perfect guide for all of your miter needs. Each channel is constructed of hard anodized aluminum for durability with Incra's trademark gold finish. Mounting is easy with pre-drilled holes and included fasteners; simply cut a 1-1/8” wide, 1/2” deep groove in your table. Create a laminated fixture using 1/2” thick material on either side of the channel. The “T-Slot” design can be used in conjunction with hold-downs. Will work with any standard 3/8” x 3/4” miter bar. Now you can add an INCRA T-Slot Miter Channel to any router table or user-made fixture for use with your miter gauge, feather boards, hold-downs or sliding jigs. Works with INCRA Miter Sliders and INCRA Miter Gauges or any standard 3/8-inch by 3/4-inch miter bar. T-Slot design for hold down capability. Mounts easily with pre-drilled holes and included fasteners. Hard anodized aluminum for durability.
-
About IRWIN Tools
IRWIN Tools manufactures and distributes professional grade hand tools and power tool accessories worldwide for trade professionals who demand superior performance and durability on the job. IRWIN Tools' brand portfolio features user-preferred category leaders such as IRWIN, VISE-GRIP, MARATHON, QUICK-GRIP, SPEEDBOR, STRAIT-LINE, MARPLES, UNIBIT, and HANSON.
For over a century, innovation has been the hallmark of IRWIN Tools. This puts IRWIN at the forefront of the industry, creating superior tools for the professional tradesman.
-
- Tile Cutting Diamond Blades - Swift Cut®
Carded
- Swift Cut® Diamond Blades - Outstanding performance at a reasonable price.
- Dry and Wet Cutting, Continuous Rim
- Designed for precise, smooth cutting of ceramic tiles, marble, slate and granite tiles.
- Quality-engineered diamonds, bonding matrix and steel core.
- Latest automated manufacturing technology.
- NOTE: Dry cutting diamond blades can also be used in wet applications.
- Tile Cutting Diamond Blades - Swift Cut®
Carded
-
-
Why trust the operation of your Incra Miter Gauge or Miter Slider in just any miter track. The Miter Channel was designed with the same Incra quality and precision to act as the perfect guide for all of your miter needs. Each channel is constructed of hard anodized aluminum for durability with Incra's trademark gold finish. Mounting is easy with pre-drilled holes and included fasteners; simply cut a 1-1/8” wide, 1/2” deep groove in your table. Create a laminated fixture using 1/2” thick material on either side of the channel. The “T-Slot” design can be used in conjunction with hold-downs. Will work with any standard 3/8” x 3/4” miter bar. Now you can add an INCRA T-Slot Miter Channel to any router table or user-made fixture for use with your miter gauge, feather boards, hold-downs or sliding jigs. Works with INCRA Miter Sliders and INCRA Miter Gauges or any standard 3/8-inch by 3/4-inch miter bar. T-Slot design for hold down capability. Mounts easily with pre-drilled holes and included fasteners. Hard anodized aluminum for durability.
-
If you're planning on making a sliding jig or fixture for your woodworking shop, the INCRA Miter Slider is exactly what you need. These inexpensive aluminum runners adjust for PERFECT sliding action in any standard (or near standard) 3/4" by 3/8" miter gauge slot with just a twist of the wrist. They lock firmly in place with another twist of the wrist. Won't warp, shrink or swell like wooden runners. Includes plans for a wide variety of shop-made jigs and fixtures. Anodized aluminum for durability and beauty. Available in 18" and 24" lengths. Eliminate the tedious process of making, fitting and adjusting the wooden runners on your sliding table saw jigs. Just screw these special extruded aluminum runners to your jigs and you're ready. Miter sliders have unique expansion mechanisms in their body that perfectly adjust to any standard 3/4" x 3/8" miter gauge slot. Each Slider includes plans for building a variety of table saw jigs.
-
-
- n the clamped position, the lever is horizontal
- Automatic and infinitely variable adjustment of the clamping height up to 35 mm while clamping force remains unchanged – without having to make manual changes to the position of the pressure screws
- Clamping force is variable up to 2,500 N depending on the adjustment of the set screw in the cantilevered joint
- Sturdy, tempered metal sheets for a long service life
- Hole pattern on the base plate designed to facilitate fast and secure clamping set-up for metric and imperial
- High-quality oil resistant two-component plastic handle
-
Out of stock
-
Out of stockLong known for their premium full-sized K Body REVO parallel clamp; BESSEY set out to produce a more compact version of this industry icon. The result of this effort is the K Body REVO.
- 900 lbs. of clamping force
- Lighter weight means less fatigue and greater productivity
- Quality construction
- High-end quality with a mid-sized price
- 3-1/4" throat depth
-
-
- For use with the Triton Track Saw TTS1400
- Quick and effective clamping for Triton guide rails
- Clamps slot beneath rail without obstructing work piece
-
-
-