-
Clamps (1)
-
Combination Sander (1)
-
Milling Machines (2)
-
Planer (8)
-
Power Sander Parts & Accessories (2)
-
Sanding Discs (2)
-
A feature-packed Table Saw for shop owners who don't need all the heft and horsepower (and extra cost) of a true cabinet saw. This Hybrid Table Saw features cabinet-mounted trunnions and an enclosed steel upper-stand for maximum dust containment. Despite its hybrid design, cutting capacities stand toe-to-toe with the most expensive cabinet saws in the market and the interchangeable riving knife offers protection for non-through cutting operations that require removal of the blade guard. Also features a serpentine belt and pulley system for smooth and quiet operation with better power transfer than a standard V-belt drive system. This saw is sure to be the envy at any shop or worksite.
-
California`s Proposition 65
-
Designed for production shops, this 37" sander has what it takes to get those big jobs done—fast. Sand boards and panels up to 4" thick and 36-1/2" wide, using two different abrasive grits in the same pass with the dual 6" sanding drums. Feed speed is adjustable from 6 to 18 FPM. The variable-speed knob conveyor adjustment and amp meter make it easy to monitor the sanding load to ensure maximum efficiency. Other great features include a hinged hood, emergency stop bar, pedestal-mounted controls, four 4" dust ports, and a 10 HP, 240V, single-phase motor. Certified to CSA and UL standards.
-
This pan and box brake is an indispensable tool if you need to increase the strength of sheet metal plates with bends, or you intend on fabricating more complicated brackets, gussets, boxes, or fixtures. The Model M1011 bends mild steels up to 20 gauge thick, 24-inches wide, and ranging in angle from 0 to 135-degrees. The removable and adjustable fingers can be installed in a variety of positions to accommodate varying widths of metal.
Quick indexing of one or many fingers makes this the perfect machine for multiple applications. Achieve extremely sharp bends and easily adjust the fingers closer or farther from the point of bend.
Heavy Duty Hold Down Clamp Lever
Bending sheet metal is a breeze with the M1011. The heavy duty hold down clamp lever allows for clamping and unclamping the sheet metal through the cam mechanism. This machine is built to take on any serious bending work.
-
Specifications
- Motor: 3/4 HP, 110V
- Swing: 13-1/4"
- Drill chuck: 1–16mm
- Arbor: JT-33
- Spindle travel: 3-1/8"
- Number of speeds: 12
- Range of speeds: 250-3050 RPM
- Table size: 12-3/8" dia.
- Oscillating spindle: 3/4"
- Table dust port: 2"
- Overall height: 63"
- Includes sanding drums
- Approx. shipping weight: 180 lbs.
-
Door builders and cabinet shops will love the extra capacity of this 37" wide-belt sander. Available with 15 HP 3-phase sanding motors, these wide-belts are built for daily industrial use with features such as a heavy-duty steel cabinet, pneumatic belt oscillation, and a built-in air filter/regulator. The digital control pad automates table adjustments and is accurate to 0.005". Also, the variable-speed conveyor, adjustable oscillation controls, and adjustable graphite/felt platen easily allow the operator to find the perfect combination of settings to achieve soft, smooth finishes on all types of wood.
-
A VFD (Variable Frequency Drive) with digital readout provides infinitely variable blade speeds between 150 and 3000 FPM, making this saw great for cutting wood and metal alike! Just turn the speed control dial to set the perfect cutting speed for each type of material you're cutting. Besides providing the variable-speed control, the VFD also allows this machine to take full advantage of the high-torque/low-speed characteristics of a 3-phase motor?while only requiring a single-phase power supply. The vertical cutting configuration and massive cast-iron table also makes it easy to feed intricate, curved cuts. All in all, the strong versatility of this 18" Vertical Wood/Metal Bandsaw makes it an ideal choice when shop space is limited and the range of profect types is diverse! Specifications
- Motor: 1-1/2 HP, 220V, 3-phase
- Power supply requirement: 220V, single-phase, 15A
- Max. cutting height: 12"
- Throat capacity: 17-1/2"
- Blade length: 133"
- Blade size range: 1/8"?1-1/4"
- Blade speed: variable, 150-3000 FPM
- Table tilt: 45° right, 5°left
- Floor to table height: 37-1/4"
- Table size: 18" x 24"
- Left and right table tilting control
- Upper and lower blade guides
- Precision-ground cast-iron table
- Quick-release blade tension
- Steel guide blocks
- Two dust ports
- Wheel brush on lower wheel
- Frequency drive provides variable speed control
- Fully balanced cast-iron wheels with rubber tires
- Rack-and-pinion adjustment on upper blade guide support
- Blade tension scale with magnified cursor
- Twin drive belts
- Includes rip fence and miter gauge
- Rip fence comes with right and left reading indicators, T-slots for quick change attachments, dead lift quick release, ball bearing slide, solid lever lock
- Overall size: 40"W x 76"H x 31"D
- Approximate shipping weight: 327 lbs.
-
Description
This Cyclone Dust Collector provides the efficiency of a 2-stage cyclone system with the portability of a single-stage dust collector. Features include high surface area pleated filters with paddles to mechanically knock off dust cake, remotely controlled magnetic switches, easy lid lifting levers for emptying collection drums, and a compact design for moving around the shop. Three models are available to suit most dust collection needs.Specifications
- Motor: 3 HP, 220V, 3450 RPM, 18A
- Intake hole size: 8"
- Impeller: 15" welded steel
- Collection drum size: 35 gallons
- Air suction capacity: 1941 CFM
- Static pressure: 11.0"
- Approx. shipping weight: 419 lbs.
California Proposition 65 Warning
-
Description
This Cyclone Dust Collector provides the efficiency of a 2-stage cyclone system with the portability of a single-stage dust collector. Features include high surface area pleated filters with paddles to mechanically knock off dust cake, remotely controlled magnetic switches, easy lid lifting levers for emptying collection drums, and a compact design for moving around the shop. Three models are available to suit most dust collection needs.Specifications
- Motor: 1-1/2 HP, 110V, 3450 RPM, 15A
- Intake hole size: 6"
- Impeller: 12-3/4" cast aluminum
- Collection drum size: 20 gallons
- Air suction capacity: 868 CFM
- Static pressure: 9.7"
- Approx. shipping weight: 375 lbs.
-
This Cyclone Dust Collector provides the efficiency of a 2-stage cyclone system with the portability of a single-stage dust collector. Features include high surface area pleated filters with paddles to mechanically knock off dust cake, remotely controlled magnetic switches, easy lid lifting levers for emptying collection drums, and a compact design for moving around the shop. Three models are available to suit most dust collection needs.
Specifications
- Motor: 2 HP, 220V, 3450 RPM, 9A
- Intake hole size: 7"
- Impeller: 13" welded steel
- Collection drum size: 20 gallons
- Air suction capacity: 1023 CFM
- Static pressure: 10.9"
- Approx. shipping weight: 397 lbs.
-
-
-
Out of stockThis 8" Parallelogram Jointers feature extra-long infeed and outfeed tables that can be adjusted transversely and longitudinally to each other for ultra-precision face flattening and edge jointing. Table levers with positive table locks provide quick and precise height adjustments, and the pedestal mounted switch is conveniently located for easy on and easy off. This version features a spiral cutterhead. CSA certified.
-
The Shop Fox W1812 Planer Moulder features precision ground cast iron wings for greater work support, T-slots for easy guide rail adjustment, pedestal mounted switch, improved chip clearance, one-piece enclosed stand and variable speed control for unsurpassed planing and moulding capability.
- Main motor: 2HP, 220V, single-phase, TEFC, 3450 RPM, Power feed motor: 1/4 HP, 180VDC, 1.5A, Feed speed: 0 - 18 FPM
- Precision-ground cast iron infeed and outfeed extension wings
- Dovetailed way for cutterhead housing with precision gib adjustments
- Variable speed power feed with chain drive power transfer
- Pedestal-mounted control switch with variable speed control
-
Out of stock
W1863 Shop Fox 15" Helical Cutterhead Planer
Produce smooth, even surfaces with this feature-rich 15" planer.
Planing creates uniform thickness and flatness in wood pieces, making them easier to work with and enhancing their overall quality. The 15", 4-row helical cutterhead comes complete with 52 indexable carbide inserts that can each be rotated three times to expose new, sharp cutting edges. The inserts sit at a slight angle to the for smooth shearing cuts, minimized tearout, a smoother finish, and operating at lower noise levels. A 230-volt, 3 horsepower motor powers through cuts up to 3/32" deep at full width or 1/8" deep on material up to 6" wide. The 2-speed gearbox allows you to choose between 16 and 28 FPM for a smooth finish or high-production feed rate. Other features include a pedestal-mounted switch, precision-ground cast-iron infeed and outfeed tables, and large board return rollers for efficient production. Like all Shop Fox planers, the W1863 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The W1863 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your sander. The Customer Service and Technical Support Teams are also U.S.-based. Parts for the planer may be available online and shipped from the parts warehouse in Springfield, MO. Made in an ISO 9001 factory CSA certifiedSPECIFICATIONS:
- Motor: 3 HP, 230V, single-phase, 12A
- Maximum cutting width: 15"
- Maximum cutting height: 6"
- Minimum stock length: 6"
- Minimum stock thickness: 3/16"
- Maximum stock thickness: 6-1/8"
- Maximum depth of cut full width: 3/32"
- Maximum depth of cut 6" wide board: 1/8"
- Cutterhead type: 4-row helical, 52 inserts
- Cutterhead speed: 5000 RPM
- Feed rate: 16 FPM, 28 FPM
- Table size: 15" W x 48" L
- Overall dimensions: 37" W x 48" D x 44" H
- Approximate shipping weight: 553 lbs.
FEATURES:
- Two-year warranty!!
- Helical cutterhead with indexable carbide inserts
- Extra-large ball-bearing return rollers
- Large side-mounted handwheel
- Cabinet style stand
- Internally mounted 3hp motor
- Triple v-belt drive
- Pedestal-mounted control panel with e-stop
- Anti-kickback fingers
- Oil-bath style gearbox for drive system
- Triple belt drive inside housing
- Heavy-duty cast-iron extension wings
-
Shop Fox W1878 9" Benchtop Bandsaw
A small footprint and top handle make moving around your workspace easier.
The Shop Fox W1878 9" Benchtop Bandsaw has a combination of features including an efficient 1/3 HP motor, LED work light, deluxe extruded aluminum fence, and a rack-and-pinion table tilt system. The blade guard is also rack-and-pinion making adjustment an easy one-handed operation. The quality design and construction of this bandsaw assures easy, accurate cuts including fine detailed cuts without the vibration found in other benchtop models. Accepting 62-inch blades 1/8" to 3/8" wide, this benchtop bandsaw can cut pieces up to 3-5/8" thick. The blade guides are dual ball bearing and the wheels are adjustable for quick alignment and coplanarity. And, with this saw weighing less than 50 pounds, you can also effortlessly move it between your home, shop or job site. Like all Shop Fox bandsaws, the W1878 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. The W1878 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your saw. The Woodstock Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the bandsaw may be available online and shipped from the Woodstock parts warehouse in Springfield, MO. Made in an ISO 9001 factorySPECIFICATIONS:
- Motor: 1/3 HP, 120V, single-phase, 2.8A
- Max. cutting width left of blade: 8-7/8"
- Max. cutting height (resaw capacity): 3-5/8"
- Blade guides: Ball-bearing upper and lower
- Table size: 12" x 12"
- Table tilt: 0–45°
- Blade size: 61-13/16"–62-3/16" (1/8"–3/8" wide)
- Blade speed: 2460 FPM
- Dust port: 2"
- Footprint: 8-1/2" x 15-1/2"
- Overall dimensions: 21" W x 17" D x 29-1/2" H
- Approximate shipping weight: 49 lbs.
FEATURES:
- Two-year warranty!!
- Adjustable wheels for alignment/coplanarity
- Rack-and-pinion table tilt
- Ball-bearing blade guides
- Extruded aluminum rip fence with camlock handle
- 2" Dust port
- Lower wheel brush to prevent build-up of dust/pitch on wheel
- LED work light
- Carrying handle for easy portability
-
Out of stock
-
W1830 Shop Fox Hanging Air Filter
This little unit provides big results with helping to remove airborne wood dust in your shop. Turn this filter on while you're working and set the timer to run after you leave the shop, and it will continue to clean the air of the fine particles that might otherwise find a home where you don’t want them. ETL certified meeting CSA C22.2 #113-12 and UL 507-9th standards! FEATURES:- Two-year warranty!!
- Infrared remote control system adjusts speeds, timer, and ON/OFF
- Easy to replace filters, no tools required
- Inner filter can be washed or blown out with compressed air
- Includes eye hooks and chains for hanging from the ceiling, or it can be set on a workbench
- ETL listed
- Approximate shipping weight: 34 lbs.
- Motor: 1/8 HP, 120V, 1A
- Air flow: 260, 362, 409 CFM
- Timer settings: 1, 2, & 4 hours
- Outer filter: 5 micron
- Inner filter: 1 micron
-
-
Outer Filter for W1830 Shop Fox Hanging Air Filter.
-
Shop Fox M1013 Metal Cutting Bandsaw
5 inch x 6 inch
A bandsaw is a must for any metal shop, and with three speeds, an automatic shut off, and ball bearing blade guides, the Shop Fox M1013 comes equipped with many important performance features. One of these features providing great versatility is the swiveling headstock so there is no fussing with establishing the cut angle at the vise. Just set the workpiece length, and swivel the headstock to an angle between -45 to +60-degrees and make the cut.
- Overall height: horizontal 42-1/2 inches; vertical 54-3/4 inches
- Footprint: 26-1/2 by 20-1/2 inches
- Blade size: 64-1/2 by 1/2 inch
- Blade speeds: 80, 120, 200 FPM
-
W1877 13" Portable Planer With Spiral-Style Cutterhead
Fixed-base planer finish quality in a portable, benchtop planer platform.
The W1877 Shop Fox 13" Portable Planer features a unique repeat cut selector. This allows you to quickly set the cutterhead to 6 pre-set heights from 1/8" to 1-3/4". A convenient thickness scale located on the top of the machine helps you keep your eye on your planing progress. The extension tables fold up for quick transporting and storage. The cutterhead height lock allows for consistent production work. Like all of the Shop Fox planers, the W1877 comes with a 2-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.) The W1877 manual was written by our U.S. based Documentation Department is packed with useful information. The Woodstock Technical Support team is U.S. based. Parts and accessories for the planer are available online and shipped from the Woodstock parts warehouse in Springfield, MO. -
This veneer Press Clamp is used to make custom veneering frames and other clamping fixtures by simply drilling a hole in the frame material to accept the threaded bushing. Double handle design produces greater torque and heavy-duty Acme threads ensure smooth operation. Removable swivel makes installation quick and easy. Overall length is 11-1/2". Veneering frame not included.
-
-
-
Description
This Elliptical Jig enables the Mini Planer/Moulder to make high-quality arched casings and mouldings with the same profile normally produced when cutting straight runs of moulding. Ideal for round-top windows and arched doorways that are characteristic of fine custom woodwork. This jig requires a shop-made 3/4" thick template of the same arc or radius as the workpiece. Maximum width capacity is 51/2".Specifications
- 5-1/2" Maximum Width Capacity
- Ball Bearing Guides
- Dovetailed Bearing Block and Base
- Hardware and Instructions Included
- Designed for use with: W1812, W1739 and W1693