- Includes Jessem prestige router lift 02320 Metric pre drilled
- Predrilled for Festool routers OF 1010 & OF 1400 only
- 32" x 24" phenolic table with aluminum extruded miter track
- Mast-R-Fence II router table fence with fully adjustable fence faces
- Fence position maintained by side mounted adjustable fence tracks
- Rigid, heavy-duty steel stand with upper and lower stretchers
-
Out of stock
-
Out of stock
Helical Cutterhead ** (serial no. 170615HH7145 and higher). -
Out of stock
- Includes Jessem prestige router lift 02332 IMPERIAL pre drilled
- Predrilled for Festool routers OF 1010 & OF 1400 only
- 32" x 24" phenolic table with aluminum extruded miter track
- Mast-R-Fence II router table fence with fully adjustable fence faces
- Fence position maintained by side mounted adjustable fence tracks
- Rigid, heavy-duty steel stand with upper and lower stretchers
-
Designed for demanding woodworkers with a sleek look, the Fusion F2 Table Saw is ready to start processing wood in your shop.Permanently lubricated bearings and Acme screws on the inside and a precision-ground cast iron table with cast aluminum alloy upper and lower trunnions mean this saw is built to last from the inside out. Precision-ground cast iron table wings and pre-formed steel cabinet complete the package.Integrated dust collection keeps your work surface clear by utilizing dust collection over and under the blade along with a sealed base.The digital readout allows for precise blade tilt adjustment and the fence features a Hi/Low window for easy set-up and accurate cuts.The on-board tool storage system keeps your European Hi/Low fence, miter gauge and push stick neatly stowed when not in use. While the built in mobile base allows you to move and store your saw wherever you need it.Includes Laguna Fusion F2 Table Saw, 10” x 60T Saw Blade, Aluminum Rail-Steel Body Fence, Dust Collection Guard, Miter Gauge, Blade Guard, Arbor Wrench, Riving Knife, Push Stick, Blade Changing Tool and Premium Zero Clearance Throat Plate.Specifications
- Motor: 1.75 HP/110V/TEFC Capacitor Start Induction with Poly-V Belt Drive
- Motor Speed: 3450 RPM
- Starter Switch: Magnetic
- Rip Capacity: 36"
- Blade Size: 10"
- Vertical Cut Height: 3-1/8”
- Cut Height at 45°: 2-1/8"
- Blade Tilt: 0-45° Left
- Minimum Kerf: 3mm ~1/8" (actual: 0.1875")
- Maximum Kerf (Dado Blade): 13/16"
- Arbor Speed: 4500 RPM
- Arbor Diameter: 5/8"
- Miter Slot: 3/4" to 1" T-slot
- Throat Plate: Zero Clearance Square Die-Cast, w/adjustment
- Fence: Double Rail Cam Action
- Base Size: 18-5/8" L x 19-1/4" W
- Floor to Table Height: 34-3/4"
- Table Size: 27"L x 20" W
- Extension Wing: 27"L x 12" W (x2)
- Throat Plate Size: 14-5/8" L x 4-1/16" W x 1/2" T
- Dust Port Size: 3-7/8" OD
- CFM Requirement: 400 CFM
- Overall Size: 39-3/4" L x 65-5/8" W x 38" H
- Machine Weight: 276 lb.
- Shipping Weight: 359 lb.
- Shipping Dimensions: 29-3/4" L x 46-5/8" W x 42-5/8" H
- Warranty: 2 year
- Power Requirements: 110V-1PH-60HZ
- Amperage (FLA): 14 AMP
- Plug Included: 5-15
- Circuit Breaker Required: 110V - 25 AMP
- Receptacle Required: 5-15
-
- Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed - no tools required
- Parallelism adjust dial features a stop to quickly return the conveyor bed to a flat position
- Dust hood includes an integrated channel that mirrors the shape of the drum and directs chips and dust to the 4" collection port
- Dust hood includes an integrated channel that mirrors the shape of the drum and directs chips and dust to the 4" collection port
- Sandsmart™ control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload
-
Out of stock
Features:- Cast iron table and base provide strength and reduce vibration during use
- Four precision-ground column design feature adds stability when raising and lowering the table
- Three cutter head design produces a superior finish in either application
- Two speed gear box has feed rates set for optimum planing and molding results
- Molding cutter head accommodates over 40 standard molding cutter sets, most 2 in. or smaller heads can be installed without removing the planing knives to save you setup time
- In feed and out feed rollers are adjustable and rubber-coated to support your work piece without marring the wood
- Top-mounted height adjustment handle is easy to use for quick table height changes
- Totally enclosed fan-cooled 1-1/2 HP motor uses two matched V-belts to deliver smooth, consistent power to the cutter head
- Exclusive angled 4 in. dust port keeps the dust hose out of the way while providing efficient chip and dust removal
- Built-in lockable casters add support and stability to the machine
-
Out of stock
The PM1900 model PM1900TX-CK3 Dust Collector is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines. The exclusive TurboCone™ improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bags. The canister filter offers superior filtering surface area over standard bags, and captures 98% of 2-micron particles. The all-metal duct improves rigidity and air flow. The clear collector bags are large capacity, which means less down-time changing them. Four swivel casters and conveniently located handles allow for easy mobility. -
Out of stock
Introducing the PWBS-14CS Bandsaw. It has an extra large, two-piece cast iron table. It consists of a 15" x 15" tilting section and a fixed 15" x 5" extension for a total working surface area of 15" x 20". A balanced, nine-spoke cast iron wheel makes for smooth blade travel, and a Carter™ quick tension release lever makes blade changing easy. A micro-adjustable dual bearing blade guide system is featured above and below the table, as well as a work lamp and chip blower. A Poly-V belt maximizes power transmission while minimizing noise and vibration. It has full 6" under guide capacity with 13-1/2" frame to blade clearance. The aluminum rip fence comes with a resaw attachment. -
Out of stock
Number of Knives 3 Standard Knife Size (L x W x T) (In.) 6-1/6 x 3/4 x 5/64 Cuts Per Minute 18,000 Cutterhead Speed (RPM) 6,000 Cutting Capacity (W x D) (In.) 6 x 1/2 Table Size (L x W) (In.) 66 x 7-1/4 Table Height from Floor (In.) 31-1/2 Infeed Table Length (In.) 32-1/2 Outfeed Table Length (In.) 32-1/2 Rabbeting Capacity (In.) 1/2 Rabbeting Ledge (In.) 9 x 2-1/2 Fence Size (L x H) (In.) 38 x 4 Fence Tilt (Deg.) 45 Forward, 45 Backward Fence Positive Stops (Deg.) 45, 90, -45 Dust Collection Minimum CFM Required (CFM) 600 Dust Port Outside Diameter (In.) 4 Motor Power (HP) 1 Motor Phase 1 Motor Voltage (V.) 115/230 Prewired Voltage (V.) 115 Motor Current (Amps) 13/6.5 Recommended Circuit Size (Amps.) 20/10 -
-
Out of stock
Do you want a lathe that’s as versatile as your turning? The 1440 lathe from JET can be tailored to accomplish a wide range of projects. With a sliding and pivoting headstock, variable speed, and many other great features this lathe meets the needs of woodturners. Experience the 1440 lathe and see how Versatility Takes Shape. -
Out of stock
The Sjobergs Nordic line of workbenches offers versatility and long-lasting durability to the serious woodworker, or even the pro with a smaller shop. Perfectly sized for anyone working out of their garage, shed, or shared space, the Nordic Pro 1400 Workbench is perfect for a wide variety of woodworking projects, from fine hand-crafted gifts to furniture or home improvement plans.- Constructed of beech wood for durability and longevity
- Double row of dog holes running from any vise location
- Vises can be reconfigured for right- or left-handed use
- Trestle design eliminates any rocking or racking while you work
- Storage solutions with SM03 Cabinet
- Accessories kit includes one 3/4” Holdfast, one Universal Anvil, two aluminum Jaw Protectors, and a set of Jaw Cushions