- Item: Band Saw
- Band Saw Type: Combination Horizontal/Vertical
- Cutting Capacity Rectangle: 8" x 11-1/4"
- Cutting Capacity Round: 5"
- Cutting Capacity Square: 8 in
- Voltage: 115/230V AC
- HP: 1 hp
- Speeds: 145 to 255 fpm
- Max. Thickness of Cut: 8"
- Miter Capacity: 45 Degrees
- Max. Blade Length: 93 in
- Min. Blade Width: 3/4 in
- Amps AC: 16.0
- Phase: 1
- Hz: 60
- RPM: 1720
- Min. Blade Length: 93 in
- Overall Width: 19 in
- Overall Depth: 51 in
- Overall Height: 43 in
- Corded/Cordless: Corded
- Application: Metal
- Cutting Angle: 45 and 90 Degrees
- Corded/Banded: Corded
- Max. Blade Width: 3/4 in
- Blade Thickness: 0.035 in
- Material Application: Metal
- Miter Angle Range: 45 Degrees , 90 Degrees
- Blade Length: 93 in
- Band Saw Operation: Manual
- Rectangular Cutting Capacity - Horizontal: 8 in x 11 1/4 in
- Round Cutting Capacity - Horizontal: 5 in
- SFPM Range: 145 to 245
- Number of Speed Settings: 3
- Throat Depth - Vertical: 12 in
- Current: 16.0 A
- Power Source: Corded
-
Out of stock
. -
Out of stock
Rikon 2.5 HP Cyclone Dust Collector 1470 CFM
The 2.5 horsepower cyclone dust collector has a newly designed impeller that reduces the stress on the motor while meeting or exceeding air flow compared to other cyclones in their class. This reduced stress allows the motor to operate cooler, more efficient and has up to 33% less cost to operate. This improves the longevity of the motor. Equipped with remote control start functions that operate on bluetooth RF band technology which increases range and ability to operate the unit from a different room. This unit has 1470 CFM. Three four inch dust ports. Built in casters for mobility. Large plastic bag liners are used for the dust containment barrel.
FEATURES
2.5 HP - 1470 CFM3 - 4 In. dust portsIncludes casters for easy mobility around the shopMore efficient motor save up to 33% cost to operateQuick release for easy cleaningSingle Phase60 Hz., 3450 RPM, TEFC MotorSPECIFICATIONS
RIKONStk no. 60-2500Air Volume (CFM)1470Assembled Depth (in)40Assembled Weight (lbs)310Assembled Width (in)30Assembly RequiredPartialAutomatic Shut-OffNoBrand / Model CompatibilityRikonCountry of OriginChinaCSA CertifiedNoDecibel Rating (dB)83.7ETL ListedYesglobalTradeItemNumber (GTIN)00814463015217Height (in)60Horsepower (hp)2.5MaterialMetalPackage ContentsDust Containment SystemPackage Depth40Package Height60Package Weight310Recommended Safety EquipmentSafety GlassesStand IncludedYesUL ListedNoUPC814463015217Vacuum AttachableNoVoltage230 -
Out of stock
The new model JWS-25X Shaper features a powerful 3HP motor with magnetic controls. The large 25”x 25-1/2” precision ground cast iron table provides plenty of support. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independently adjustable left and right fence has a built in 4” dust port. -
Out of stock
JET Mitering Horizontal bandsaws unique design features a swiveling head while the base remains stationary. This allows the stock to remain same position while making accurate crosscuts and miters. Backed by the industry leading two year warranty, JET Mitering Bandsaws are built to last and deliver precision results. -
A must have for any serious woodworker, the Baileigh Industrial SS-2725 spindle shaper arrives to you with everything you need to start making chips. The included 3/4” arbor 1” arbor, ¼” router collet, and ½” router collet are powered by a 3hp, 220V single phase motor which drives the spindle at either 8,000 or 10,000rpm. The cutter protrudes from a 25” x 20” cast iron table with 3 spindle plate inserts; a 25” x 7” cast iron table extension is included. The on/off, spindle direction, and spindle height controls are all mounted on the front of the machine, with the spindle lock located to the side for ergonomic access. Atop the table lies independently adjustable fences, 2-way adjustable cutter guard w/ window, 4” dust port and vertical/lateral hold downs, everything needed to start working on custom molding, trim, panels, and many other wood projects. -
Out of stock
Cut panels & wide stock all day long with this 10" Heavy-duty Cabinet Table Saw. A 52" rip capacity & extended side & rear tables will support a full sheet of plywood, making ripping & cross cutting operations safe & simple. A guard with splitter or interchangeable riving knife helps prevent binding and kickback, and a rail mounted magnetic switch with thermal overload protection provides additional safety features. Bevel cutting is also safe & precise with the left tilting blade & digital angle display. Includes a miter gauge & 10" blade. CSA certified meeting CSA C22.2 #71.2-08; CSA C22.2 #105-1953 and UL 987 standards! -
Out of stock
Swing Over Bed (In.) 16-1/2 Swing Over Tool Rest Base (In.) 12-7/8 Distance Between Centers (In.) 40 Headstock Movement Slide & Rotate Spindle Bore (In.) 5/8 Tailstock Bore (In.) 3/8 Spindle Taper MT2 Quill Taper MT2 Quill Travel (In.) 4-1/4 Spindle Thread (In./TPI) 1-1/4"/8 TPI Outboard External Threads (In. x TPI) 3/4-14 LH Spindle Speeds High 120-3200/Low 40-1200 Speed Range 40-3200 Number of Indexing Positions 36 Centerline of Spindle to Floor (In.) 44-1/2 Outboard Turning Yes Bed Construction Cast Iron Motor Power (HP) 1-1/2 Motor Phase (PH) 3 Motor Voltage (V.) 230 Prewired Voltage (V.) 115 Input Only Wiring Remarks 115v input only Motor Amps 4.6 Recommended Circuit Size (Amps.) 20 -
Out of stock
This Extreme Table Saw is ideally suited to handling large panels without blinking an eye. A right-hand and rear mounted extension table supports the widest panels before during and after the cut, and the large rail mounted switch control won't get lost under the panel. Other features include ample storage shelves, a user friendly blade guard, a riving knife, a digital readout for blade angle and an efficient dust management system that includes an internal dust port and sloped cabinet floor that directs saw dust into the 4" dust port. Enjoy all of the innovative features this big capacity saw has to offer. CSA certified meeting CSA C22.2 #71.2-08, CSA C22.2 #105-1953, and UL 987 standards. Made in an ISO 9001 Factory. SPECIFICATIONS:- Motor: 5 HP, 220V, single-phase
- Amps: 18A
- Blade tilt: Left, 45 degrees
- Table height from floor: 35-3/4"
- Table size with extension 69-1/2" x 78-3/4"
- Arbor speed: 3600 RPM
- Arbor size: 1"
- Maximum dado width: 3/4"
- Maximum depth of cut @ 90°: 4"
- Maximum depth cut @ 45°: 2-3/4"
- Maximum rip capacity: 52"
- Distance from front of table to blade at maximum blade height: 11-1/2"
- Distance from front of table to center of blade: 17-1/4"
- Overall dimensions: 91-1/2" W x 79-1/2" D x 42-1/2" H
- Footprint: 22-1/2" L x 24" W
- Approximate shipping weight: 854 lbs.FEATURES:
- Precision-ground cast iron table
- Cast iron trunnions
- 3/8" x 3/4" T-slots & miter gauge
- 4" dust port
- Smooth and quiet Poly-V serpentine belt power transfer
- Steel cabinet
- Hinged motor cover
- Right hand and rear extension tables
- Magnetic switch with thermal overload protection and lock-out padlock
- Digital readout for bevel angle
- Quick change between riving knife and splitter guard
- Includes 12" x 60T blade and push stick
-
Out of stock
- Sealed and permanently lubricated drum ball bearings for longer life
- Oscillating feature reduces heat build-up on sanding belt to reduce loading and burning
- SandSmart™ infinitely variable-feed control produces the ultimate finish at a rate of up to 10 feet per minute
- Conveyor belt TRACKERS™ dramatically reduce the need for manual belt adjustments
- 1" of oscillating stroke
-
Out of stock
JET Mitering Horizontal bandsaws unique design features a swiveling head while the base remains stationary. This allows the stock to remain same position while making accurate crosscuts and miters. Backed by the industry leading two year warranty, JET Mitering Bandsaws are built to last and deliver precision results. -
Out of stock
The line of JET Metal/Wood Vertical Bandsaws offers machine and fabrication professionals all the power and precision in a package that meets their individual specifications. JET has engineered a gear box that permits cutting of a great variety of materials, then backed it with the industry leading two year warranty -
Out of stock
JET’s Hydraulic Shop Press line consists of a 5, 15 and 35 ton hydraulically powered H frame press. Each machine is built using heavy steel plate that is electro welded together, and comes standard with industrial grade hydraulics. These machines are for the serious fabrication and machine shop owner who demands only the best quality from his operation. -
This planer is simply a reliable, heavy-duty 20" planer. If you need a 20" Planer that you can rely upon to get the job done with quality results and trouble-free operation, then look no further. There have been versions of the G1033 in the Grizzly line for over 20 years with tens-of-thousands of them sold and smoothly churning out countless board feet of material on a daily basis. We are reintroducing this no-frills, all-performance classic version from an extremely reliable Taiwanese factory. While still feature-packed, it has only the most highly-desired features to keep the value up and the price as low as possible. -
Out of stock
- Rolls beads and forms mild steel sheet metal up to 16 gauge
- Rolls beads and forms aluminum and copper up top 1/8"thick
- Machine supplied with 10 anvils and 4 rolling wheels
- Three sets of popular fender groove shaping wheels
- Throat 45"
- Quick cam handle releases the work piece
- Both wheels swivel 90°
- Quick wheel change without using any tooling
- Polished wheels supplied with sealed bearings for smooth operation
- Rolling wheels 6" diameter
- Storage brackets for rolling and anvil wheels
- Screw lift assembly designed for comfortability and precise pressure setup
- Heavy duty frame
- Retractable wheels make moving this machine around the shop simple
-
Out of stock
J-9180-3 7 In. Zip Miter Horizontal Bandsaw JET Mitering Horizontal bandsaws unique design features a swiveling head while the base remains stationary. This allows the stock to remain same position while making accurate crosscuts and miters. Backed by the industry leading two year warranty, JET Mitering Bandsaws are built to last and deliver precision results. California Proposition 65 Warning. View Warning Label- Mitering head swivels to cut any angle 0° - 60° while the work piece remains secured
- Adjustable blade guides that utilizes cam follower bearings mounted on eccentric shafts
- Convenient control panel with overload protection
- Heavy-duty cast iron saw head and sturdy base
- Fully adjustable hydraulic downfeed system
- Large hand wheel and built-in gauge provides easy blade tensioning
- Quick positioning vise reduces set-up time
- Coolant system
- Adjustable material stop
- 3/4" Bi-Metal blade
-
Out of stock
Style (Type) Planer Cutterhead Speed (RPM) 4500 Cutterhead Diameter (In.) 2-7/8 Number of Knives 68 Four-Sided Inserts Maximum Full Width Depth of Cut (In.) 1/8 Maximum Planing Width (In.) 14-7/8 Maximum Planing Thickness (In.) 6 Minimum Planing Length (In.) 8 Feed Rate (FPM) 16, 20 Dust Collection Minimum CFM Required (CFM) 400 Dust Port Outside Diameter (In.) 4 Motor Power (HP) 3 Motor Phase (PH) 1 Motor Voltage (V.) 230 Prewired Voltage (V.) 230 Motor Amps 11 -
Out of stock
For precision planing Jet’s newest will do the job with ease, 15" JET Helical Cutterhead Planer, JWP-15BHH , will give great results for a reasonable price. This machine features a monster 3-horsepower motor with two speed gear box to adjust your feed rate for a better finished surface. The innovative Precision Air Strut System provides consistent upward pressure on the cutterhead, reducing the chance of board snipe. Its rock-solid table is constructed of cast iron and features Steel infeed/outfeed table extensions that conveniently fold out of the way. And because even the coolest power planer is one of the messiest machines on the planet, JET’s angled 4" dust port keeps your dust hose out of the way for easy hookup on your shop’s dust collection system. Add knowledgeable customer service professionals standing by if you need them, and you’re good to go. -
Out of stock
The BDB-919 benchtop lathe is perfect for the most versatile shops. Engineered with precision induction hardened ground bed-ways and precision tapered roller bearings, the BDB-919 delivers the smooth operation and rigidity needed to craft professional pieces. -
Out of stock
The BDB-919 benchtop lathe is perfect for the most versatile shops. Engineered with precision induction hardened ground bed-ways and precision tapered roller bearings, the BDB-919 delivers the smooth operation and rigidity needed to craft professional pieces. -
Out of stock
-
Out of stock
-
- Exclusive variable speed oscillating drum moves from left to right—minimizing visual scratch patterns in workpieces and increasing the lifespan of abrasive paper.
- Sandsmart™ control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload
- Dust hood includes an integrated channel that mirrors the shape of the drum and directs chips and dust to the 4" collection port
- Conveyor bed parallelism is easily adjusted by turning the dial on the outside of the bed - no tools required
- Redesigned conveyor system pulls the work piece through the sander instead of pushing
- Precision-machined and dynamically balanced extruded aluminum drum is designed to dissipate heat and has 3/4" of oscillating stroke
- Infinitely variable speed control of up to 10 feet per minute allows the user to choose the optimal feed rate
- Conveyor belt TRACKERS™ reduce the need for manual belt adjustments
- Tool less abrasive take-up clips make changing abrasives quick and easy
- Mobile cabinet features a heavy duty 45" x 24" footprint to increase stability and has a door to keep items stored securely
- Snipe is virtually eliminated thanks to the adjustable tension rollers that apply downward pressure to the work piece
- One rotation of the top-position hand wheel adjusts the drum height by 1/16"
-
Drum Length (In.) 23 Drum Speed (RPM) 1725 Drum Diameter (In.) 5 Conveyor Motor totally enclosed DC Conveyor Speed (FPM) 0-10 Maximum Board Thickness (In.) 4 Maximum Board Width (In.) 44 (two passes) Minimum Board Length (In.) 2-3/8 Minimum Board Thickness (In.) 1/32 Dust Port Outside Diameter (In.) 4 Motor Power (HP) 1-3/4 Motor Phase (PH) 1 Motor Voltage (V) 115 Motor Amps 15 Recommended Circuit Size (Amps.) 20
-
-
A VFD (Variable Frequency Drive) with digital readout provides infinitely variable blade speeds between 150 and 3000 FPM, making this saw great for cutting wood and metal alike! Just turn the speed control dial to set the perfect cutting speed for each type of material you're cutting. Besides providing the variable-speed control, the VFD also allows this machine to take full advantage of the high-torque/low-speed characteristics of a 3-phase motor?while only requiring a single-phase power supply. The vertical cutting configuration and massive cast-iron table also makes it easy to feed intricate, curved cuts. All in all, the strong versatility of this 18" Vertical Wood/Metal Bandsaw makes it an ideal choice when shop space is limited and the range of profect types is diverse! Specifications- Motor: 1-1/2 HP, 220V, 3-phase
- Power supply requirement: 220V, single-phase, 15A
- Max. cutting height: 12"
- Throat capacity: 17-1/2"
- Blade length: 133"
- Blade size range: 1/8"?1-1/4"
- Blade speed: variable, 150-3000 FPM
- Table tilt: 45° right, 5°left
- Floor to table height: 37-1/4"
- Table size: 18" x 24"
- Left and right table tilting control
- Upper and lower blade guides
- Precision-ground cast-iron table
- Quick-release blade tension
- Steel guide blocks
- Two dust ports
- Wheel brush on lower wheel
- Frequency drive provides variable speed control
- Fully balanced cast-iron wheels with rubber tires
- Rack-and-pinion adjustment on upper blade guide support
- Blade tension scale with magnified cursor
- Twin drive belts
- Includes rip fence and miter gauge
- Rip fence comes with right and left reading indicators, T-slots for quick change attachments, dead lift quick release, ball bearing slide, solid lever lock
- Overall size: 40"W x 76"H x 31"D
- Approximate shipping weight: 327 lbs.
-
Out of stock
This Deluxe XACTASAW has a quick-release riving knife and integrated arbor lock that's more efficient and keeps the operator safe. This Deluxe XACTASAW model offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, plus a fully shrouded blade for highly efficient dust collection. -
Out of stock
The JET HBS-814GH was engineered with the operator in mind. An easy access control panel and heavy-duty geared head transmission for quick speed change means productivity never slows. Like every JET machine we manufacture, professionals know they can rely on this saw when the project is on the line.