- Item: Band Saw
- Band Saw Type: Combination Horizontal/Vertical
- Cutting Capacity Rectangle: 8" x 11-1/4"
- Cutting Capacity Round: 5"
- Cutting Capacity Square: 8 in
- Voltage: 115/230V AC
- HP: 1 hp
- Speeds: 145 to 255 fpm
- Max. Thickness of Cut: 8"
- Miter Capacity: 45 Degrees
- Max. Blade Length: 93 in
- Min. Blade Width: 3/4 in
- Amps AC: 16.0
- Phase: 1
- Hz: 60
- RPM: 1720
- Min. Blade Length: 93 in
- Overall Width: 19 in
- Overall Depth: 51 in
- Overall Height: 43 in
- Corded/Cordless: Corded
- Application: Metal
- Cutting Angle: 45 and 90 Degrees
- Corded/Banded: Corded
- Max. Blade Width: 3/4 in
- Blade Thickness: 0.035 in
- Material Application: Metal
- Miter Angle Range: 45 Degrees , 90 Degrees
- Blade Length: 93 in
- Band Saw Operation: Manual
- Rectangular Cutting Capacity - Horizontal: 8 in x 11 1/4 in
- Round Cutting Capacity - Horizontal: 5 in
- SFPM Range: 145 to 245
- Number of Speed Settings: 3
- Throat Depth - Vertical: 12 in
- Current: 16.0 A
- Power Source: Corded
-
Out of stock
. -
Out of stock
Rikon 2.5 HP Cyclone Dust Collector 1470 CFM
The 2.5 horsepower cyclone dust collector has a newly designed impeller that reduces the stress on the motor while meeting or exceeding air flow compared to other cyclones in their class. This reduced stress allows the motor to operate cooler, more efficient and has up to 33% less cost to operate. This improves the longevity of the motor. Equipped with remote control start functions that operate on bluetooth RF band technology which increases range and ability to operate the unit from a different room. This unit has 1470 CFM. Three four inch dust ports. Built in casters for mobility. Large plastic bag liners are used for the dust containment barrel.
FEATURES
2.5 HP - 1470 CFM3 - 4 In. dust portsIncludes casters for easy mobility around the shopMore efficient motor save up to 33% cost to operateQuick release for easy cleaningSingle Phase60 Hz., 3450 RPM, TEFC MotorSPECIFICATIONS
RIKONStk no. 60-2500Air Volume (CFM)1470Assembled Depth (in)40Assembled Weight (lbs)310Assembled Width (in)30Assembly RequiredPartialAutomatic Shut-OffNoBrand / Model CompatibilityRikonCountry of OriginChinaCSA CertifiedNoDecibel Rating (dB)83.7ETL ListedYesglobalTradeItemNumber (GTIN)00814463015217Height (in)60Horsepower (hp)2.5MaterialMetalPackage ContentsDust Containment SystemPackage Depth40Package Height60Package Weight310Recommended Safety EquipmentSafety GlassesStand IncludedYesUL ListedNoUPC814463015217Vacuum AttachableNoVoltage230 -
Out of stock
The new model JWS-25X Shaper features a powerful 3HP motor with magnetic controls. The large 25”x 25-1/2” precision ground cast iron table provides plenty of support. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independently adjustable left and right fence has a built in 4” dust port. -
Out of stock
JET Mitering Horizontal bandsaws unique design features a swiveling head while the base remains stationary. This allows the stock to remain same position while making accurate crosscuts and miters. Backed by the industry leading two year warranty, JET Mitering Bandsaws are built to last and deliver precision results. -
A must have for any serious woodworker, the Baileigh Industrial SS-2725 spindle shaper arrives to you with everything you need to start making chips. The included 3/4” arbor 1” arbor, ¼” router collet, and ½” router collet are powered by a 3hp, 220V single phase motor which drives the spindle at either 8,000 or 10,000rpm. The cutter protrudes from a 25” x 20” cast iron table with 3 spindle plate inserts; a 25” x 7” cast iron table extension is included. The on/off, spindle direction, and spindle height controls are all mounted on the front of the machine, with the spindle lock located to the side for ergonomic access. Atop the table lies independently adjustable fences, 2-way adjustable cutter guard w/ window, 4” dust port and vertical/lateral hold downs, everything needed to start working on custom molding, trim, panels, and many other wood projects. -
Out of stock
Cut panels & wide stock all day long with this 10" Heavy-duty Cabinet Table Saw. A 52" rip capacity & extended side & rear tables will support a full sheet of plywood, making ripping & cross cutting operations safe & simple. A guard with splitter or interchangeable riving knife helps prevent binding and kickback, and a rail mounted magnetic switch with thermal overload protection provides additional safety features. Bevel cutting is also safe & precise with the left tilting blade & digital angle display. Includes a miter gauge & 10" blade. CSA certified meeting CSA C22.2 #71.2-08; CSA C22.2 #105-1953 and UL 987 standards! -
Out of stock
Swing Over Bed (In.) 16-1/2 Swing Over Tool Rest Base (In.) 12-7/8 Distance Between Centers (In.) 40 Headstock Movement Slide & Rotate Spindle Bore (In.) 5/8 Tailstock Bore (In.) 3/8 Spindle Taper MT2 Quill Taper MT2 Quill Travel (In.) 4-1/4 Spindle Thread (In./TPI) 1-1/4"/8 TPI Outboard External Threads (In. x TPI) 3/4-14 LH Spindle Speeds High 120-3200/Low 40-1200 Speed Range 40-3200 Number of Indexing Positions 36 Centerline of Spindle to Floor (In.) 44-1/2 Outboard Turning Yes Bed Construction Cast Iron Motor Power (HP) 1-1/2 Motor Phase (PH) 3 Motor Voltage (V.) 230 Prewired Voltage (V.) 115 Input Only Wiring Remarks 115v input only Motor Amps 4.6 Recommended Circuit Size (Amps.) 20 -
Out of stock
This Extreme Table Saw is ideally suited to handling large panels without blinking an eye. A right-hand and rear mounted extension table supports the widest panels before during and after the cut, and the large rail mounted switch control won't get lost under the panel. Other features include ample storage shelves, a user friendly blade guard, a riving knife, a digital readout for blade angle and an efficient dust management system that includes an internal dust port and sloped cabinet floor that directs saw dust into the 4" dust port. Enjoy all of the innovative features this big capacity saw has to offer. CSA certified meeting CSA C22.2 #71.2-08, CSA C22.2 #105-1953, and UL 987 standards. Made in an ISO 9001 Factory. SPECIFICATIONS:- Motor: 5 HP, 220V, single-phase
- Amps: 18A
- Blade tilt: Left, 45 degrees
- Table height from floor: 35-3/4"
- Table size with extension 69-1/2" x 78-3/4"
- Arbor speed: 3600 RPM
- Arbor size: 1"
- Maximum dado width: 3/4"
- Maximum depth of cut @ 90°: 4"
- Maximum depth cut @ 45°: 2-3/4"
- Maximum rip capacity: 52"
- Distance from front of table to blade at maximum blade height: 11-1/2"
- Distance from front of table to center of blade: 17-1/4"
- Overall dimensions: 91-1/2" W x 79-1/2" D x 42-1/2" H
- Footprint: 22-1/2" L x 24" W
- Approximate shipping weight: 854 lbs.FEATURES:
- Precision-ground cast iron table
- Cast iron trunnions
- 3/8" x 3/4" T-slots & miter gauge
- 4" dust port
- Smooth and quiet Poly-V serpentine belt power transfer
- Steel cabinet
- Hinged motor cover
- Right hand and rear extension tables
- Magnetic switch with thermal overload protection and lock-out padlock
- Digital readout for bevel angle
- Quick change between riving knife and splitter guard
- Includes 12" x 60T blade and push stick
-
Out of stock
- Sealed and permanently lubricated drum ball bearings for longer life
- Oscillating feature reduces heat build-up on sanding belt to reduce loading and burning
- SandSmart™ infinitely variable-feed control produces the ultimate finish at a rate of up to 10 feet per minute
- Conveyor belt TRACKERS™ dramatically reduce the need for manual belt adjustments
- 1" of oscillating stroke
-
Out of stock
JET Mitering Horizontal bandsaws unique design features a swiveling head while the base remains stationary. This allows the stock to remain same position while making accurate crosscuts and miters. Backed by the industry leading two year warranty, JET Mitering Bandsaws are built to last and deliver precision results. -
Out of stock
The line of JET Metal/Wood Vertical Bandsaws offers machine and fabrication professionals all the power and precision in a package that meets their individual specifications. JET has engineered a gear box that permits cutting of a great variety of materials, then backed it with the industry leading two year warranty -
Out of stock
JET’s Hydraulic Shop Press line consists of a 5, 15 and 35 ton hydraulically powered H frame press. Each machine is built using heavy steel plate that is electro welded together, and comes standard with industrial grade hydraulics. These machines are for the serious fabrication and machine shop owner who demands only the best quality from his operation.