-
Out of stock
-
Out of stock
This 37-inch sander has what it takes to get those big jobs done - fast. Sand panels and boards up to 4-inch thick and 36-1/2-inch wide with the dual 6-inch sanding drums. The feed speed is adjustable from 6 to 18 FPM so you can fine-tune your production speed to provide the desired finish. The variable speed knob and amp meter make it easy to monitor workpiece load. Other great features: a hinged hood, an emergency stop bar, pedestal-mounted controls, four 4-inch dust ports, and a 15 HP 220V/440V* single-phase motor. -
Out of stock
The PM2000 table saw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration. The cast iron tables are oversized, and the push button arbor lock is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. The blade tilt scale has adjustable angle indicators for repetitive bevel cuts. Built-in retractable omni-directional caster system mobilizes your table saw. A wide stance, heavy-duty trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive belt system results in quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up. The saw has a proprietary safety switch with magnetic interlock, and the stop button can be knee activated. The melamine extension table with steel frame doubles as a mobile workbench, complete with bench dog holes and a vise. -
Out of stock
This T1242 30-Ton Electric/Hydraulic Shop Press features a 3 HP, 220V, single-phase hydraulic pump motor, horizontally adjustable sliding piston head, easy-access push-button controls, 10" stroke, and table-to-piston distance of 7-3/4" to 39". Includes carriage/table lifting chain, two table plates, and a full-size rear guard plate. -
Out of stock
The PM2000 table saw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration. The cast iron tables are oversized, and the push button arbor lock is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. The blade tilt scale has adjustable angle indicators for repetitive bevel cuts. Built-in retractable omni-directional caster system mobilizes your table saw. A wide stance, heavy-duty trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive belt system results in quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up. The saw has a proprietary safety switch with magnetic interlock, and the stop button can be knee activated. -
Out of stock
The PM2000 Table saw sets a new standard for innovation with an array of patented features and massive body design. The cast iron tables are oversized, and the newly designed Arbor Lock lever is accessible from above the Table top to eliminate the need for dual Arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. The blade tilt scale features an integrated digital read out as well as adjustable angle indicators for repetitive bevel cuts. The newly designed integrated retractable hydraulic caster system mobilizes your Table saw much higher than the previous model to assist when moving over thresholds. A wide stance, heavy-duty box TRUNNION and concave teeth on the TRUNNION gears promote easier raising and tilting of saw blade. Poly-v drive belt system results in quieter, more efficient power transfer from the motor to the Arbor with virtually No vibration and less heat build-up. Improved built-in dust Collection port with convenient access to the inside of the saw cabinet for simple clean-up. The saw has a proprietary safety switch with magnetic interlock and the stop button can be knee activated. -
Out of stock
The Powermatic 3520B Woodworking Lathe retains all the features of classic Powermatic lathes--including a sliding headstock, electronic variable-speed control, and a spindle lock--plus some great innovations. To name just a few, a digital RPM readout makes it a snap to keep track of your speed. With the 3520B, you'll get classic reliability and advanced technology--the best of both worlds to help you handle your most important jobs. Versatile to Suit a Range of Projects With wide-ranging capabilities, the Powermatic 3520B is ideal for both novice users and seasoned veterans. Incredibly adaptable, the Powermatic 3520B features a 20-inch swing and 34-1/2 inches between the centers to accommodate a huge range of project sizes. For additional versatility, the included pin can be screwed into the spindle housing to provide up to 24 indexing positions for drilling hole patterns or routing flutes and other equally spaced decorative finishes. The 3520B lathe is currently out of production. Using available parts i.e 2020B Lathe, 2HP, 1 or 3PH, 220V 1792020 and the addition of an 18" tailstock extension an overall bed length of 38" is achieved vs 34.5" for the discontinued 3520B . -
Sale!
G0632Z 16" x 42" Variable-Speed Wood Lathe
If you're looking for a lathe that will handle all of your turning needs, this is the one!
The G0632Z 16" x 42" Wood Lathe uses a variable-frequency inverter to control motor speed. The variable-frequency drive runs the 3-phase motor to provide variable-speed control and maximum torque at low speeds. The variable-speed control allows for spindle speed adjustment from 100–3200 RPM and the digital readout provides a precise reading of the current spindle speed. The headstock swivels for outboard turning and can be positioned anywhere along the bed for increased flexibility in workpiece setup. The swivel pin can lock the headstock at 0°, 45°, 90°, 135°, 180°, and 270°. The bed is precision-ground steel for strength and durability and the steel legs can be easily adapted for adding more mass. The tailstock, headstock, and tool rest support have lever-action cam locks for quick positioning.Aside from its large turning capacities, this machine has all of the features you would hope for in a heavy-duty wood lathe.
Like all Grizzly lathes, the G0632Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The G0632Z manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your lathe. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the lathe may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.SPECIFICATIONS:
- Motor: 2 HP, 220V, 3-phase, 8A
- Power requirement: 220V, single-phase
- Swing over bed: 16"
- Swing over tool rest: 11-1/2"
- Distance between centers: 42"
- Spindle taper: MT#2
- Spindle thread size: 1-1/4" x 8 TPI RH
- Tailstock taper: MT#2
- Spindle speed: Variable, 100–3200 RPM
- Headstock rotation: 0°, 45°, 90°, 135°, 180°, 270°
- Tool rest width: 14-1/8"
- Overall dimensions: 77-1/16" L x 22-1/16" W x 47" H
- Approximate shipping weight: 394 lbs.
FEATURES:
- Electronic variable-speed control
- Digital spindle-speed indicator
- 30° direct indexing using one indexing hole
- 10° indexing using all three indexing holes
- Headstock can be positioned anywhere along the bed
- Belt drive offers two speed ranges to maximize spindle torque
- Spindle lock pin
- Outboard spindle handle
- Forward/reverse switch
- Emergency stop switch
STANDARD EQUIPMENT:
- Spur center
- Cup live center
- Knockout tool
- Indexing pin
- Tool rest
- 6" face plate
- Hex wrenches
-
T10718 50" Deluxe Pan and Box Brake
Easily form transverse or down-flanged parts.
The T10718 50" Deluxe Pan and Box Brake is used to make straight bends, boxes, pans, and trays in sheet metal that is 12-gauge or thinner. Clamping fingers and bending blocks of different lengths can be arranged to make 90° bends of varying widths up to 50" wide. The fingers and blocks can be spaced in any configuration necessary to permit the sides of a box to be bent without interfering with previously bent sides. Setback and clamping pressure are easily adjusted for different workpiece requirements, and the adjustable bending stop is used to make repetitive bends of the same angle.Perfect for shops doing signs, fabrication, HVAC, or architectural sheet metal!
Like all Grizzly pan and box brakes, the T10718 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The T10718 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your pan and box brake. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the pan and box brake are available online and shipped from the Grizzly parts warehouse in Springfield, MO.SPECIFICATIONS:
- Maximum working width: 50"
- Maximum sheet metal thickness: 16-gauge mild steel at full width
- Maximum height of pan/box sides: 2"
- Minimum reverse bend: 5/8"
- Maximum bending angle: 135°
- Overall dimensions: 63" W x 38" D x 44-3/4" H
- Approximate shipping weight: 945 lbs.
-
Out of stock
The PM3000B brings heavyweight performance and patented innovations to the 14-inch table saw arena. The riving knife rises and lowers with the blade, substantially reducing kickback risk; and both riving knife and blade guard each have a quick-release, so mounting and removing them is fast and tool-free. A wide-stance trunnion and concave teeth on the trunnion gears promote smooth blade raising/tilting. The Poly-V drive belt system results in quieter, more efficient power transfer with virtually no vibration and less heat build-up. A newly designed push button arbor lock is accessible from above the table top and eliminates the need for dual arbor wrenches. Sloped cabinet floor, dust shroud around the blade, and built-in port for dust extraction. Style (Type)Cabinet Blade Diameter (In.)14 Arbor Diameter (In.)1 Arbor Speed (RPM)4500 Maximum Depth of Cut at 90 Degrees (In.)5-1/8 Maximum Depth of Cut at 45 Degrees (In.)3-1/2 Maximum Diameter of Dado (In.)8 Maximum Width of Dado (In.)13/16 Table in Front of Saw Blade at Maximum Depth of Cut (In.)15-1/2 Maximum Rip Right of Blade (In.)50 Maximum Rip Left of Blade (In.)14 Table TypeCast Iron Table Height from Floor (In.)35-1/4 Table Size (In.)26 x 38 Table Size with Extensions (In.)48 x 38 Table T-Slot (In.)3/4 x 3/8 Dust Collection Minimum CFM Required (CFM)600 Dust Port Outside Diameter (In.)4 Motor Voltage (V.)230/460 Prewired Voltage (V.)230 Motor Current (Amps)18.4/9.2 Recommended Circuit Size (Amps.)30 -
Out of stock
The Rugged frame and base ensure that hardened polished, high-carbon steel rolls on the JET Electrical Power Slip Roll deliver smooth, even results. All electrical and rotating parts are designed to enhance operator safety and comfort during use. Easy setup and operation, this is a must-have for any HVAC or fabrication shop. -
Out of stock
This bandsaw features the legendary quality, precision and attention to detail that has been helping woodworkers expand their ambition for more than ninety years.- Exclusive Powermatic T-Square style Accu-Fence maximizes accuracy and safety
- The Accu-Fence has complete adjustability for aligning to blade and squaring to table
- Sturdy cast iron table and trunnion assembly offers maximum rigidity for large work pieces
- Positive locking cam with pressure adjustment
- Oversized side plate can be used in the horizontal or vertical position
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com