Shop

/Shop
  • HSS, with carbide teeth, for gearbox type: b – for machining cast iron pipes (including those with cement chucks) and for machining non-alloyed steel pipes up to 400 N/mm2.
    • BrandMakita
    • MFR #XUC01X1
    • UPC #
      088381856423
    • Country of OriginChina

    Dimensions

    Brake Dia. 7 in
    Tray Width 31 1/8 in
    Tray Length 51 1/2 in
    Wheel Dia. 15 1/2 in
    Axle Dia. 7 in
    Wheel Width 4 1/4 in
    Tray Depth 35 1/2 in
    Wheel Diameter 15 1/2 in
    Brake Diameter 7 in
    Axle Diameter 7 in
    • Attach Saw Trax's KT52 52" Panel Saw Kit to your own custom-built frame or mounting to convert your circular saw into a panel cutting workhorse at a fraction of the cost of commercial panel saws!
    • Accommodates a 7.25" circular saw (not included).
    • Kit includes cross-cut guide tubes, guide tube support brackets and hardware, carriage, and universal saw plate. Saw plate can be easily swapped out for a router mounting plate (not included).
    • Guide tubes are made of 1/8" wall steel with powder-coated support brackets.
    • Current generation steel carriage features sealed roller bearing system for long-lasting performance and smoother, more accurate tracking than old-style systems.
  • Out of stock
    Delta 31-482 6 in X 89 in Oscillating Edge Sander Delta 31-482 6 in X 89 in Oscillating Edge Sander
    6-Inch by 89-Inch Oscillating Edge Sander; 1 1/2 Hp, 115/230V (wired 230V) 1 phase motor; Oscillating belt 108 OPM; Belt Speed 3,900 FPM; Cast Iron tilt table; Cast iron Contour Sanding Table; Fence; Dust Hood; Miter Guage; Backstops & Tracking Tool.
    • Precision ground steel platen with graphite pad eliminates distortion and extends belt life
    • Aggressive, powerful sanding system for quick material removal in vertical or horizontal positions and any bevel position in between
    • Backed by a 5 year warranty
  • Out of stock

    Good things come in small packages and the US Stove 5501S pellet stove is sure to continue that tradition. By combining a full size burning system with a small cabinet and hopper, the 5501S combines the best of both worlds. It can heat up to 2,200 sq. ft. yet its small footprint and clearances allow it to fit easily into smaller areas. Upgraded digital controls with a remote control make this stove easy to adjust. The ceramic glass window comes with an air wash system to keep the fire viewable. The 20 LB. hopper provides up to 13 hours of burn time and because of its size, you will get fewer auger jams due to collapsed pellets. Pellet heaters work by using a software driven control board to precisely deliver a predetermined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home.

    default.jobtemplate.hls.m3u8

  • HSS, with carbide teeth, for gearbox type: b – for machining cast iron pipes (including those with cement chucks) and for machining non-alloyed steel pipes up to 400 N/mm2.
  • Out of stock
    The 10” Left Tilt Contractor Table Saw 10-205 is a no-nonsense machine whose simplicity is the strength behind its popularity with home craftspeople and professional workshops. Operating this table saw is straight forward – blade controls are large and easy to access, box-type rip fence sets accurately,
    Dual table ‘T’ slots give great options for use of miter gauges and other jigs, blade changes are easy, blade guards and control switch with large ‘off’ paddle add excellent safety measures to the user, and the built-in mobile base allows moving the saw around the shop easy. Wired for use with 3-wire 120V receptacles.
    • Powerful 1-3/4 HP, 1Ph, 120/240V, 3450 RPM motor • Industrial quality, multi-ribbed flat J-belt for smooth power transfer • Precision machined cast iron table top and wings • Dual table ‘T’ slots for use with miter gauges and jigs • Magnetic table insert removes without tools • Clear blade guard with riving knife/splitter for extra user safety
  • Out of stock
    Introducing the new JET JDP-17, 17” Drill Press. From a full 5” of spindle travel to the sturdy cast iron head with a poly v-belt drive system, this drill press is designed to perform. This drill press also features a long-lasting, built-in LED work light to provide direct lighting while reducing shadows. A large 14" x 19" work table provides plenty of support with an edge designed for easy clamping.
  • Out of stock
    • Includes JessEm Mast-R-Lift Excel II for most cylinder router motors
    • 32" x 24" phenolic table with aluminum extruded miter track & T-track
    • Extruded aluminum router table fence with fully adjustable fence faces
    • Rigid, heavy-duty steel stand with upper and lower stretchers
    • Optional Digital Readout Attachment and Pow-R-Tek Remote Power Switch not included
  • Out of stock
    The 16-32 Drum Sander (#71632) is the newest member of SuperMax Tools drum sander family which was designed with new features to improve productivity.
    • Exceptional SuperMax Features

      Supermax has addressed issue common with other drum sanders by engineering features that are exclusive to their 16-32 machines. No other drum sander on the market has these features!
      • Patented “Quick Lever Adjustment” which allows height adjustments from 0″-3″ with one pull of a lever versus 48 revolutions of a hand wheel greatly reducing set-up time and increases productivity
      • Includes build-in Digital Read Out which helps maintain consistent thicknesses to increase accuracy and quality.
      • A newly designed Turbo Vented Dust Port increases CFM air-flow to dust collectors by 15%.
      • Simple alignment feature – just one nut adjusts the conveyor to parallel the sanding head, making aligning the conveyor to the sanding head fast and easy
      • Indexed alignment setting – the fast lever is an indexed alignment setting for narrow and wide stock. When sanding stock wider than 16″, the index lever will properly adjust the conveyor for flawless wide sanding.
      • Drum will never go “out of alignment” – the drum carriage is bolted to the base, preventing any movement or alignment issues.
      • INTELLISAND Technology
      • CSA Certified
      • Folding in feed/out feed tables sold separately
  • Out of stock
    Features such as extruded-aluminum fence and rails, quick-release blade tension, miter gauge, upper and lower ball bearing blade guides, enclosed cabinet stand, hinged wheel covers, 4" dust port, and a 1 HP motor are all standard. And, with its cast -iron frame and table, this bandsaw will be a reliable shop fixture for many years to come. An optional 6" extension block kit (D3348) is also available. CSA certified meeting CSA and UL standards!

    Specifications

    • Motor: 1 HP, 110V/220V, prewired 110V, single-phase, TEFC, 1725 RPM, 11A/5.5A
    • Blade size: 93-1/2" (1/8" to 3/4" wide)
    • Precision-ground cast-iron table size: 14" x 14" x 1-1/2"
    • Cutting capacity (throat): 13-1/2"
    • Max. cutting height: 6"
    • Table height above floor: 43"
    • Blade speeds: 1800 & 3100 FPM
    • Cast-iron frame and wheels
    • Table tilt: 45° right, 10° left
    • Precision-ground cast-iron table
    • Cast-iron blade wheels
    • Deluxe extruded-aluminum fence
    • Ball-bearing blade guides
    • Footprint: 18"W x 15-1/2"D
    • Heavy-duty cabinet-type stand with storage space
    • Quick-change blade release/tensioning
    • Upper and lower ball bearing blade guides
    • All ball bearing construction
    • 4" dust port
    • Includes one 3/8" blade, fence and miter gauge
    • Fence scale with magnifying window
    • Approximate shipping weight: 275 lbs.
    California Proposition 65 Warning
  • Out of stock
    Beautifully finished long cherry live edge slab. Stunning conversation piece suitable for use
    in any room of your house or office.
    • Plain sawn, perfectly flat. Stabilized
    • Approximate size 153" x 24" x 2.5" (approximate because the live edges are rugged and irregular in shape and dimensions). 
    • Stunning live edge
    • 100% handcrafted in U.S.A. Thoroughly protected.
    • Satin polyurethane finish
    • Actual photo of finished slab you will receive.
    • Show room model, faint scratches
    • Optional thick & sturdy black finish metal legs complete the look in a simple yet appealing way (cost $490 set of 2)
    • Free delivery within New England
    • Outliers please ask for freight quote.