- Maximum capacity of 14 gauge mild steel and 18 gauge stainless steel.
- 10-foot (120”) length enables your shop to take on a wide range of projects.
- Bends up to 135°.
- Heavy-duty truss rods support the apron to reduce flex on maximum capacity bends.
- Electro-welded all-steel framework keeps this metal brake accurate over decades of daily use at full capacity.
- 26 fingers of varying sizes (6 fingers of 3", 4 of 4", 10 of 5", 6 of 6") allow you to bend boxes and pans up to 6” deep.
- You can set up the individual hardened fingers for straight bending or box and pan configurations.
- Apron shafts ride in precise oilable bearings, maintaining tight bend tolerances and minimizing operator fatigue.
- 2 massive counterweights make it easy to bend at maximum capacity and reduce physical strain.
- Massively-built sheet metal finger brake weighs in at almost 3500 lbs.
-
Out of stock
This box brake can bend metal along its 10-foot width without twisting. You can bend 4 x 8 sheets at 45°, perfect for adding a stiffening rib to support long duct pieces. -
Out of stock
This 6-foot box brake offers a happy medium between our 4-foot BB-4812 and our 8-foot BB-9612. With a welded steel frame, the BB-7212 offers years of hassle-free productivity.- Bends 12 gauge mild steel over its full 6-foot (72”) length.
- Maximum bend angle of 135°.
- 2 counterbalance weights make it easy to bend at maximum capacity and reduce operator strain.
- Electro-welded and truss-supported steel frame prevents distortion or twisting and produces high-quality bends.
- Comes standard with 17 hardened fingers of varying sizes (6 fingers of 3", 3 of 4", 6 of 5", and 2 of 6") .
- 3-piece finger design allows for a 6” box depth.
- You can set up a long straight brake or a segmented one for boxes or pans.
- Heavy-duty steel floor stand puts the beam at optimal working height.
-
Out of stock
This box brake’s welded steel frame allows for a large capacity—without the twisting you’ll get from many competing metal brakes. The BB-14418 will provide years of trouble-free use.- 18 gauge mild steel and 22 gauge stainless steel maximum capacity.
- Bends sheet metal across its entire 12-foot (144”) length.
- 135° maximum bend angle.
- Includes 31 interchangeable fingers of varying lengths (6 fingers of 3", 6 of 4", 10 of 5", 9 of 6" ).
- You can make just about any size box or pan imaginable up to a 6” box depth.
- 2 large counterweights help the operator bend at full length and capacity without straining.
- Electro-welded steel construction enables this sheet metal brake to handle its maximum capacity while maintaining accuracy.
-
Out of stock
This machine’s 13-foot length lets you bend unusual shapes from 4 x 8 sheet of metal with room to spare, even on corner-to-corner bending.- Maximum capacity of 22 gauge mild steel.
- Over 13-foot (157”) overall bend length.
- Bend angle of up to 135°.
- You can set up the fingers to do multiple bends along the length of the brake.
- 33 interchangeable fingers of varying lengths (6 fingers of 3", 6 of 4", 10 of 5", 11 of 6") allow you to make just about any size box or pan up to a 6” box depth.
- Fully-welded heavy steel framework enables this metal finger brake to handle its full capacity, day in, day out, for years—without twisting or distortion.
- 2 large counterweights minimize physical strain and help the operator easily bend at full length.
-
Out of stock
This metal brake’s heavy-duty steel frame can bend 8-foot-wide sheet metal without trouble or distortion.- Manually-operated straight brake.
- Bends 16 gauge (or lighter) mild steel sheet metal with ease.
- Bend angle of up to 135°.
- 8 feet (96”) long.
- Bending leaf includes a removable apron to reduce distance between bends, if needed.
- Easily-adjustable material thickness wheels let you get the tightest bend possible with lighter materials.
- Fully-welded frame and support rods keep alignment correct during the bending process, even at maximum capacity.
- Comes with 2 large counterweights to save you effort and physical strain when bending.
-
Out of stock
This industrial sheet metal bender can bend light-gauge materials without the awkward length of larger metal brakes.- This straight brake has a maximum capacity of 20 gauge mild steel and 18 gauge aluminum.
- 48” (4 feet) long and can bend at full capacity all the way across.
- You can adjust the clamping pressure for more delicate work.
- Bend angle of up to 120°.
- Right and left cam lever arm precisely clamps the material.
- Fully-welded steel plate construction, with support trusses on the top and bottom, maintains rigidity to deliver accurate results for years.
-
Out of stock
-
Out of stock
This magnetic sheet metal brake enables you to make enclosed shapes that would be impossible on a traditional box brake.- Runs on 220-volt single-phase power.
- 16 gauge mild steel maximum capacity.
- 6-foot (72”) length lets you to get creative with uses for this sheet metal brake.
- Offers all the features of our BB-4816M model—but with 2 feet of extra length.
- Maximum bend angle of 180°.
- Industrial magnetic power of 6 tons is consistent across the entire beam, producing crisp bends even in the middle.
- Unlimited box depth thanks to its open-ended design.
- Also makes straight bends if you choose to set up straight (instead of segmented) bars.
- You can adjust the finger setback for different thicknesses.
- Easy to operate. To make a bend on the BB-7216M:
- Put a piece of material between the clamping bar to the depth required.
- Hit the foot pedal control that softly clamps the material and reposition if necessary.
- Lift the leaf arms to engage full magnetic power, holding the material in place as the leaf arm makes the appropriate bend.
- Supplied back gauge helps you repeat bends and parts exactly.
- Scaled stroke angle control is convenient for production.
- For tighter bends, you can remove the bottom leaf's bending extension.
- Baileigh covers this electromagnetic sheet metal brake with a 1-year parts warranty.
-
Out of stock
The BB-9610H hydraulic sheet metal brake adjusts to fit the gauge you’re bending and produces uniform bends.- 10 gauge mild steel sheet metal maximum capacity.
- Bends across its full 8-foot (96”) working width.
- 1” beam adjustment.
- Maximum bend angle of 135°.
- Industrial-grade hydraulics will make precise and efficient bends, day in, day out, for decades.
- 5 hp motor runs on 220-volt 3 phase power.
- Hydraulic system clamps the material via dual hydraulic motors, then lifts the bending leaf with industrial hydraulic cylinders.
- Adjustable bend auto-stop simplifies production runs; just dial in your desired degree.
- Foot pedal and toggle joystick controls let you operate this hydraulic sheet metal brake in manual or semi-automatic mode.
- Includes 22 hardened 3-piece fingers (6 of 3", 4 of 4", 10 of 5" and 2 of 6" ) to create many different size boxes.
- 6” box depth maximum.
- Fully-welded steel beam and bending leaf, supported with truss rods, prevent twisting and deflection—important when you’re bending heavy 10 gauge mild steel.
- Baileigh covers this hydraulic box and pan brake with a 1-year parts warranty.
-
Out of stock
This finger brake can bend 10 gauge mild steel across its 48” (4-foot) length. A welded steel frame prevents misalignment and ensures accuracy.- Runs on 220-volt 3-phase power.
- Powerful 3 hp motor controls all the hydraulic functions.
- 1” beam adjustment.
- Maximum bend angle of 135°.
- Includes 11 fingers (3 fingers of 3”, 2 of 4”, 5 of 5”, 1 of 6”), allowing you to adjust for different size boxes and pans you want to make.
- Industrial-grade hydraulics lift the leaf for clean, precise motion.
- Adjustable bend auto-stop makes it easy to produce repeatable bends.
- Removable bending support lets you get closer between bends.
- Fully-welded beam and bending leaf, stabilized with truss rods, minimizes any deflection when bending at full capacity.
- You can operate this hydraulic brake in manual or semi-automatic mode.
- Hydraulic motor turns a cam to lift and clamp the beam when bending 10 gauge mild steel.
- Baileigh backs this hydraulic box and pan brake with a 1-year parts warranty.
-
Out of stock
The BB-9612H hydraulic box and pan brake can bend 12 gauge mild steel (or lighter) across its full 8-foot (96”) width.- 135° maximum bend angle.
- Comes standard with 22 fingers (6 fingers of 3”, 4 of 4”, 10 of 5”, and 2 of 6”) that you can adjust to make different sizes of boxes and pans.
- Powerful industrial-grade hydraulics lift the leaf and lift or clamp the beam.
- You can run this hydraulic sheet metal brake in manual or semi-automatic mode via toggle or foot pedal controls.
- Adjustable bend auto-stop, for easy and exact repeatability, makes this a very production-oriented hydraulic sheet metal brake.
- Apron angle bar detaches to let you get closer between bends.
- Electro-welded beam and leaf, stabilized with truss rods, minimizes deflection when you’re bending at full capacity and keeps bends crisp and accurate.
- Covered by a 1-year parts warranty.
- We typically keep replacement parts in stock for fast deliveries.
- Includes lifetime technical support by phone. Call up our knowledgeable team of reps whenever you need project advice or help related to this sheet metal finger brake.
-
Out of stock
Jet 350020 JMD-18PFN Milling/Drilling Machine W/Power Downfeed, 2HP, 115V, 1-Phase Mill drills are a lighter alternative to a Milling machine. These combine a belt driven drill press with the dual coordinate abilities of the Milling machine's table for flexibility and efficiency. A locking collet prevents the cutting tool from falling away from the spindle when lateral forces are experienced against the bit. Although light in construction, the JMD Milling Drilling Machines possess the advantages of space-saving versatility, affordability and light machining capability. Features:- Milling/Drilling Machines
- One-piece cast iron column for added support
- Belt cover quick slide latch allows faster belt adjustment to change spindle speeds
- Base taper allows for easier clean-up
- Larger hand wheel knobs
- UL Listed motor
- Extra large worktable
- Heavy-duty tapered roller bearings support the spindle, resulting in greater tolerance and more accurate drilling depth
- New positive quick-stop knob and easy-to-read internal depth gauge (external on JMD-15)
- 360° head swivel
- Heavy-duty power downfeed with manual fine feed (JMD-18PFN)
- Three power down feeds (JMD-18PFN .004, .007, .01)
- Worklamp
- Adjustable carbide facemill
- Drill press angle vise
- 1/2 drill chuck, chuck arbor
- Draw bar
- Shown with optional base P/N 350045