Rikon Model 30-120: 13″ Benchtop Drill Press
-
Out of stock
-
-
Sale!
Out of stock
71293462090, FEIN AMM 700 MAX SELECT SET CORDLESS OSCILLATING MULTITOOL
Our best cordless MultiTool for ultra-rapid work progress with interior construction and renovation in the variant without a storage battery and charger – with a bi-metal saw blade for wood, metal, and plastics. Features:- Anti-vibration: Minimal vibration and outstanding noise dampening means you can work comfortably, for longer.
- StarlockMax tool mounting: Work faster and with higher precision thanks to 100% no-loss power transmission.
- QuickIN: Change accessories in under 3 seconds with a patented, tool-free, FEIN rapid-clamping system.
- With the StarlockMax tool mounting, you have access to around 180 FEIN accessories in the Starlock, StarlockPlus and StarlockMax performance categories.
- 18 V FEIN PowerDrive motor: Especially powerful, virtually wear-free brushless motor with high efficiency, extremely high load handling and long service life.
- Variable Speed: Constant speed even under load and variable electronic speed control.
- Metal drive head: 100% of gearbox components are made from metal providing high load capacity and long service life.
- Mechanical interface: For stationary use in the table or drill jig holders, or to attach depth stops.
- SafetyCell technology: Perfect protection from overload, overheating and deep discharge thanks to Li-ion batteries with individual cell monitoring.
- Dust protection grille - protects tool from aggressive dust.
- The battery capacity can be read directly on the battery.
- Specifications:
- Battery voltage 18 V
- Battery compatibility Li-ion / HighPower Li-ions
- Battery interface MultiVolt
- Oscillations 10,000 - 19,500 opm
- Tool mount StarlockMax
- Tool change QuickIN
- Range 2 x 2,0°
- Weight without battery 2.43 [1.10] lbs[kg]
- Sound pressure level LpA 83 dB
- Measurement uncertainty of the measured value KpA 3 dB
- Sound power level LWA 94 dB
- Measurement uncertainty of the measured value KWA 3 dB
- Peak sound value LpCpeak 97 dB
- Measurement uncertainty of the measured value KpCpeak 3 dB
-
Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT (36V) Brushless Chain Saw Kit (model XCU03PT). With zero emissions, lower noise, and considerably less maintenance, the XCU03PT is a welcome solution for cutting and trimming applications. It's powered by two 18V LXT batteries for 36V power and run time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw. The XCU03PT has a 14" guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)). -
Out of stock
This pan and box brake is an indispensable tool if you need to increase the strength of sheet metal plates with bends, or you intend on fabricating more complicated brackets, gussets, boxes, or fixtures. The Model M1011 bends mild steels up to 20 gauge thick, 24-inches wide, and ranging in angle from 0 to 135-degrees. The removable and adjustable fingers can be installed in a variety of positions to accommodate varying widths of metal.Quick indexing of one or many fingers makes this the perfect machine for multiple applications. Achieve extremely sharp bends and easily adjust the fingers closer or farther from the point of bend.
Heavy Duty Hold Down Clamp Lever
Bending sheet metal is a breeze with the M1011. The heavy duty hold down clamp lever allows for clamping and unclamping the sheet metal through the cam mechanism. This machine is built to take on any serious bending work.
-
Out of stock
The best way to make a perfect first cut with a Granberg Mill, now even better! Comes in two 5′ sections. Makes for easy transport and increased versatility. Design upgrades include: Longer rail system for the same price. Single piece dog hinge plate for easier assembly. Four cross members for added stability. Part Number and name: G1010 – 10 Foot E-Z rail.Used for/with: G778, sizes 24” -84”, G777 Small Log Mill.
Fits: Can be used with any horizontally-oriented mill. Larger crossbars available for logs that are greater than four feet in diameter.
General description: Aircraft-grade aluminum rails provide a stable surface that attaches in seconds and is easily leveled left to right, front and back. Cross members are adjustable along whole length of the EZ rails.
Use description: Hammer in dogs attached to cross members, set levels using a screwdriver or drill, then start milling
MADE IN THE USA
Also, includes G778-36 36in Alaskan Chainsaw mill.Part Number and name: G778-36 Alaskan Chainsaw mill, 36 inch
Used for/with: Chainsaws with bars of 36” or less and 70cc or more displacement
Fits: All Chainsaw makes
General description: Basic Mill (G778) and 36-inch Handle and Rail Set (G781-36): Tubular Aircraft aluminum extrusion and zinc-plated steel parts. Instruction manual & assembly hardware. High-quality U.S. made aircraft aluminum and steel. MADE IN THE USA.
Use description: This versatile, heavy-duty chainsaw lumber mill accurately cuts planks and beams up to 32” wide and 1/2” to 13” deep. Clamps onto your chainsaw bar with no drilling required. Lightweight and portable, enables user to mill lumber where the tree falls. No previous experience required! New CNC-Machined billet end brackets! (See photo) These new end brackets are more accurate, easier to adjust, create less vibration than the old die cast version and are virtually unbreakable. Perfect for homeowners, woodworkers, arborists and sawyers. Optimal results will be had when used in conjunction with Granberg ripping chain and first cut platforms.
PLEASE NOTE: Using this mill with a bar of 22 inches and less may affect compatibility with G850 Slabbing brackets, as the available cutting width will be less than the width of slabbing brackets (16″).P65WARNING
-
Out of stock
Just Released, Improved Design 11/23
Military Grade Aluminum Arms, sealed bearings for smooth operation and accuracy.
Shawdowline Worklight. Lights work area and casts cut line even in bright outdoor light.
18 Inch crosscut capacity for wide stock.
Upfront Bevel and miter controls. Indents at all popular miter and bevel angles
NO RAILS Allows unit to be located against the wall in the workshop
-
Out of stock
The DELTA 34-976 Deluxe Uniguard Table Saw Blade Guard fits DELTA 10-inch Unisaws and Contractor's Saws, and has an innovative, overhead design that doesn't have a mounting bracket behind the blade to interfere with dado cutting or molding operations. The operator remains protected for non-through cutting operations since the blade guard doesn't have to be removed. For through-cutting, the guard has a removable splitter with anti-kickback pawls that afford the operator additional safety. With a U-shaped support arm, you'll be able to cut the full capacity of the fence; you can also keep half the guard elevated for use of a push stick when cutting with the fence close to the blade. The Uniguard Table Saw Blade Guard comes includes the guard, splitter, table mounting bracket, support arm and extension. -
-
Out of stock
IN STOCK. AVAILABLE FOR IMMEDIATE SHIPMENT Powermatic Motor Stock Number: 6284878 TEFC, 3HP,1Ph, 230V, 60Hz,15A Part Number: 6284878 This replacement motor is compatible with the 15HH Planer and the 15S Planer. This OEM motor is compatible with the 15HH Planer and the 15S Planer. Stock No. 1791213 15HH, 15-Inch Planer, Helical Cutterhead, 3HP, 1Ph 230V Stock No. 1791210 15S, 15-inch Planer, 3 Knife Cutterhead, 3HP, 1Ph 230V -
Out of stock
The Delta 50 in. T-Square Fence and Rail system fits the Delta Unisaw. It comes with the fence, rails and table legs. It has laminated 9 ply birch plywood sides for durability and non-marring.- One piece 14 gage 2 by 3" rectangular steel guide tube, mounted to on 1/4" section angle iron rail.
- Fence body constructed of 14 gage welded steel.
- Fence securely clamps to both front tube only to insure perfectly parallelism to the blade front to back.
-
Out of stock
The new JET® dual bevel sliding compound miter saw is one the most versatile saws in your shop. Efficiently cut miters, bevels, straights, and compounds with precision and accuracy over a hand saw. A workhorse in your shop that is also portable enough to take with you when you need a great saw on the job.