Makita is meeting demand with an expanding line of cordless OPE that includes the 18V X2 LXT Lithium-Ion (36V) Brushless Blower. With zero emissions and lower noise, the 18V X2 (36V) Cordless Blower is a welcome solution for clean-up applications. It’s powered by two 18V LXT batteries (included) for maximum power and run time, but without leaving the 18V battery platform. With the efficient Makita BL brushless motor, the blower delivers longer run time, increased power and speed, and longer tool life. Model XBU02PTX1 is a kit and includes the Blower, two fast-charging 18V LXT Lithium-Ion5.0Ah batteries and an efficient 18V Dual Port Rapid Optimum Charger, as well as an 18V LXT Brushless 4-1/2" Paddle Switch Angle Grinder that is engineered for corded grinding performance without the cord. Makita’s efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per battery charge than similar non-brushless tools.
-
-
The Beisemeyer 78-130 table saw guide rail features a built-in tape front rail, back rail, guide tube, hardware available with fence, fence sold separateley. Capacity, 30" Right and 12" Left. The Beisemeyer 78-130 delta gray table saw guide rail is specifically for use with table saw and requires fence and table board with legs. Length of guide is 30 Inches. Scale Calibration 1/16. Features construction Steel Tubing. -
Out of stock
1 HP portable dust collector #60-105 is a great size and adaptable for many uses that a small shop encounters. Single 4 In. dust port draws 660 CFM, more than enough vacuum power for big chip makers, like jointer and planers. Built-in casters and handle make moving it about easy. Features an adjustable pipe extension with chip collecting funnel that can be positioned high for use with lathes, drill presses, workbenches etc. Includes 2 micron cloth filter bag, 108 In. long x 4 In. dust hose, adjustable pipe & funnel attachment system, safety on/off switch, and wall mounting brackets. 1 HP develops 660 CFM 4 In. dust port inlet for attaching to a single machine Includes casters for easy mobility around the shop Includes adjustable pipe & funnel system for dust collection use with lathes, drill presses, workbenches, etc. can be positioned up to 55 In. high. -
Powerful wet and dry vacuum cleaner for connecting power tools during workshop and installation use. Details- High performance turbine for 151 cfm (71 l/s) flow rate and 98.4" of water lift (245 mbar vacuum).
- Low volume of 66 dB (A).
- Large range due to 19 ft [6 m] power cord and 13 ft [4 m] vacuum hose.
- Anti-static function against electrostatic charging during work – electrostatically conductive with optionally available suction hose 3 13 45 120 01 0 and tool coupling 3 13 45 300 01 0.
- Large wheels rotate 360° for optimal maneuverability, even in tight conditions.
- Tool coupling with suction control for easy control of suction power.
- Autostart outlet with power-on delay to prevent current spikes.
- Practical storage area with rim.
- Approval for dust class L.
-
StarlockPlus Oscillating Multi-Tool with snap-fit accessory change -
Out of stock
This air filtration system is setting new standards in clean air. With the smart technology the laser sensor continually scans the air in the room for dust, dirt, smoke and other particulates. When it senses those particulates it turns on to automatically clean the air. It senses particles as small as 3 Microns. Since it typically hangs above a tool or workbench the 2 LED lights will help light the project below. You can operate it in manual mode and control three speeds... 1189, 756 & 580 CFM. At top speed you can clean the air in a 20' x 20' x 8' shop in just under 3 minutes, or over 21 times an hour. In the manual mode you can also control the times to set it at 1 to 24 hours by the hour with the convenient remote control. -
Out of stock
Heavy-duty frame is welded tubular steel for strong supportSteel wheels provide easy mobility, independently lock for stabilityCompatible with the PWBS-14 bandsaw.Allows your shop to be versatile and organized while saving space.2042377Model PWBS-14CS Band Saw17-1/2”---15-1/2”5-1/2”2”3/4” -
Out of stock
Saw blade for JET CS-275 Manual Cold Saw. Trust this authentic OEM part. See model diagram and owner's manual for installation details and precautions which should be taken. One blade. -
Out of stock
General International dust collectors are high quality. This collector that will meet your dust management needs and applications. Designed for industrial applications with a continuous duty rating. The motor is totally enclosed, fan cooled and permanently lubricated. Intake screen prevents larger pieces from jamming in the impeller. Innovative designed to be portable and mobile on 7" rubber wheels. 5" heavy-duty PVC hose between body of fan and collector. It's user friendly and can move around your shop at great ease. Quick-release bag clamps with metal straps. The safety lock-out switch with removable key, helps prevent unauthorized use. The precision aluminum spin-balanced impeller for smooth operation and minimal noise. Includes reusable clear plastic collector bag and washable, extra fine 2 micron filter bag. 6-3/4" static pressure of water. 2 year limited warranty.
-
- Anti-vibration system: Permanently safe, pleasant working conditions with minimum vibrations and outstanding noise damping.
- StarlockPlus tool mounting: Work faster and with higher precision thanks to 100% no-loss power transmission.
- QuickIN: Tool change in under 3 seconds with a patented, tool-free, FEIN rapid-clamping system.
- With the StarlockPlus tool mounting, you have access to around 100 FEIN accessories in the Starlock and StarlockPlus performance categories.
- DC motor: Effective, high-torque motor technology for output that is virtually identical to that of the model with a cord.
- Tacho generator: Constant speeds, even under load, and infinitely variable electronic speed control.
- Metal drive head: High load capacity and maximum service life, since all drive head parts are made of metal.
- Mechanical interface: For stationary use in the table or drill jig holders, or to attach depth stops.
- Electronic cell protection (ECP): ECP protects storage batteries against overloading, overheating and deep discharge.
- COOLPACK technology ensures a longer storage battery service life, enabling longer operation times.
- The battery capacity can be read directly on the battery.
- Compatible with AMPShare/Bosch Professional 18 V batteries from 2008 on.
-
G0803Z 9" Benchtop Bandsaw with Laser Guide
Superior cutting performance and portability with enough power to not bog down even on hardwoods.
The Grizzly G0803 that was awarded as Top Value by Wood Magazine for its combination of features including an efficient 1/3 HP motor, heavy-duty feel and portability has been upgraded with a new laser guidance system and adjustable blower to provide superior cutting visibility. The G0803Z 9" Benchtop Bandsaw with Laser Guide features a 62-inch blade and accepts blades from 1/8" to 3/8" wide. It can cut pieces up to 3-1/2" high and has enough power to cut through green woods and other dense materials. The rack-and-pinion table tilt system makes it easy to cut beveled edges. The blade guard is also rack-and-pinion making adjustment an easy one-handed operation. The quality design and construction of the G0803Z assures easy, accurate cuts including fine detailed cuts without the vibration found in other benchtop models. Blade tension and tracking adjustments are simple as turning the respective blade adjustment knob. The small footprint and top handle make moving the bandsaw around your workspace easier. The saw weighs less than 50 lbs. so you can also effortlessly move it between your home, shop or job site. Because of the compact size, the bandsaw will arrive about 80% assembled. It will include a comprehensive operation manual written by our U.S. based Technical Documentation Department making set up a breeze. Like all Grizzly drill bandsaws, the G0803Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the bandsaw are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS:- Motor: 1/3 HP, 120V, single-phase, 2.8A
- Max. cutting width left of blade: 9"
- Max. cutting height (resaw capacity): 3-5/8"
- Blade guides: Ball-bearing upper & lower
- Table size: 12" x 12"
- Table tilt: 0 - 45°
- Blade size: 61-13/16" - 62-3/16" (1/8" - 3/8" wide)
- Blade speed: 2460 FPM
- Overall dimensions: 20-3/4" W x 17" D x 29-1/2" H
- Footprint: 6-1/2" x 15-1/2"
- Approximate shipping weight: 49 lbs.
- Laser Sight
- Adjustable Wheels for Alignment/Coplanarity
- Fence Adjustable for Blade Lead
- Rack & Pinion Table Tilt
- Ball-Bearing Blade Guides
- Quick-Release Blade Tension Lever
- Extruded Aluminum Rip Fence with Camlock Handle
- Lower Wheel Brush to Prevent Build-Up of Dust/Pitch on Wheel
- 2" Dust Port
- Chip Blower
- Work Light
-
The Delta Mobile Base For 36-L336 36 in. UNISAW (For Dual Front Crank Unisaws) is essentially for easily moving your Delta Unisaw. Made from Steel in the US.- Adds mobility to your saw in your workshop
- Adjustable feet provided for leveling saw
- Heavet duty steel, designed specifically for this new Unisaw