-
Premium kiln dried pen blanks. Perfect for that special pen given as a gift or better yet for you! Contains two each of the following species: Padauk, Purple Heart, Sapele, Zebrawood &Walnut, Padauk. Each blank measures approx. 3/4 squared by 5" long. -
Whether you work in a small shop or simply need to keep your workspace flexible, the Bora PM-900 Workbench Caster Kit is the ideal solution to keep your shop mobile.- All-swivel wheels to easily move the bench around small workshops and into tight spaces
- Non-marking three-inch rubberized wheels provide a smooth roll over cords and uneven floors
- Each wheel has 155-lb. weigh capacity — up to 50 lbs. more per wheel than most other caster kits
- Supports up to 620 lbs. total
- Heavy-duty foot lever mechanism from Bora’s popular mobile base lineup delivers proven performance
- Bracket designs can be fitted to virtually any bench
- Easy to install — make one quick measurement to mark and install the kit with included hardware
-
Sale!
Out of stock
This machine is outfitted with stops and clamps, so you can quickly insert pre-cut boards, clamp them in place, and start cutting. With the ability to cut two joints at a time, these dovetail machines can produce a 4-sided drawer in under two minutes if the boards are prepared properly. Includes a 4-sided template for cutting 1", 1-1/2", 2", and 2-1/2" dovetails. Also spindle heads are micro-adjustable to give you complete control of dovetail "fit." -
Out of stock
This 37-inch sander has what it takes to get those big jobs done - fast. Sand panels and boards up to 4-inch thick and 36-1/2-inch wide with the dual 6-inch sanding drums. The feed speed is adjustable from 6 to 18 FPM so you can fine-tune your production speed to provide the desired finish. The variable speed knob and amp meter make it easy to monitor workpiece load. Other great features: a hinged hood, an emergency stop bar, pedestal-mounted controls, four 4-inch dust ports, and a 15 HP 220V/440V* single-phase motor. -
Out of stock
This T1242 30-Ton Electric/Hydraulic Shop Press features a 3 HP, 220V, single-phase hydraulic pump motor, horizontally adjustable sliding piston head, easy-access push-button controls, 10" stroke, and table-to-piston distance of 7-3/4" to 39". Includes carriage/table lifting chain, two table plates, and a full-size rear guard plate. -
Sale!
Out of stock
G0632Z 16" x 42" Variable-Speed Wood Lathe
If you're looking for a lathe that will handle all of your turning needs, this is the one!
The G0632Z 16" x 42" Wood Lathe uses a variable-frequency inverter to control motor speed. The variable-frequency drive runs the 3-phase motor to provide variable-speed control and maximum torque at low speeds. The variable-speed control allows for spindle speed adjustment from 100–3200 RPM and the digital readout provides a precise reading of the current spindle speed. The headstock swivels for outboard turning and can be positioned anywhere along the bed for increased flexibility in workpiece setup. The swivel pin can lock the headstock at 0°, 45°, 90°, 135°, 180°, and 270°. The bed is precision-ground steel for strength and durability and the steel legs can be easily adapted for adding more mass. The tailstock, headstock, and tool rest support have lever-action cam locks for quick positioning.Aside from its large turning capacities, this machine has all of the features you would hope for in a heavy-duty wood lathe.
Like all Grizzly lathes, the G0632Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The G0632Z manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your lathe. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the lathe may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.SPECIFICATIONS:
- Motor: 2 HP, 220V, 3-phase, 8A
- Power requirement: 220V, single-phase
- Swing over bed: 16"
- Swing over tool rest: 11-1/2"
- Distance between centers: 42"
- Spindle taper: MT#2
- Spindle thread size: 1-1/4" x 8 TPI RH
- Tailstock taper: MT#2
- Spindle speed: Variable, 100–3200 RPM
- Headstock rotation: 0°, 45°, 90°, 135°, 180°, 270°
- Tool rest width: 14-1/8"
- Overall dimensions: 77-1/16" L x 22-1/16" W x 47" H
- Approximate shipping weight: 394 lbs.
FEATURES:
- Electronic variable-speed control
- Digital spindle-speed indicator
- 30° direct indexing using one indexing hole
- 10° indexing using all three indexing holes
- Headstock can be positioned anywhere along the bed
- Belt drive offers two speed ranges to maximize spindle torque
- Spindle lock pin
- Outboard spindle handle
- Forward/reverse switch
- Emergency stop switch
STANDARD EQUIPMENT:
- Spur center
- Cup live center
- Knockout tool
- Indexing pin
- Tool rest
- 6" face plate
- Hex wrenches
-
Out of stock
T10718 50" Deluxe Pan and Box Brake
Easily form transverse or down-flanged parts.
The T10718 50" Deluxe Pan and Box Brake is used to make straight bends, boxes, pans, and trays in sheet metal that is 12-gauge or thinner. Clamping fingers and bending blocks of different lengths can be arranged to make 90° bends of varying widths up to 50" wide. The fingers and blocks can be spaced in any configuration necessary to permit the sides of a box to be bent without interfering with previously bent sides. Setback and clamping pressure are easily adjusted for different workpiece requirements, and the adjustable bending stop is used to make repetitive bends of the same angle.Perfect for shops doing signs, fabrication, HVAC, or architectural sheet metal!
Like all Grizzly pan and box brakes, the T10718 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The T10718 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your pan and box brake. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the pan and box brake are available online and shipped from the Grizzly parts warehouse in Springfield, MO.SPECIFICATIONS:
- Maximum working width: 50"
- Maximum sheet metal thickness: 16-gauge mild steel at full width
- Maximum height of pan/box sides: 2"
- Minimum reverse bend: 5/8"
- Maximum bending angle: 135°
- Overall dimensions: 63" W x 38" D x 44-3/4" H
- Approximate shipping weight: 945 lbs.
-
Out of stock
This slider will allow you to crosscut sheets up to 63" x 106-1/4" and rip panels as wide as 33". This 7-1/2 HP workhorse has all of the user-friendly features you'd expect from an industrial-duty sliding table saw, like a scoring blade that eliminates tear-out, a miter fence with adjustable flip-stops, dust ports above and below the blade, riving knife, a standard rip fence, and a clamping hold-down system for the sliding table. For production ripping and crosscutting, every shop needs a sliding table saw, and the G0820 just might be the perfect fit. -
Out of stock
The Saw Trax Full Size 10100 panel saw is just one of the models within the 1000 series product line that are built for the Woodworker in mind. The 10100 has a vertical cut height of 100 inches giving you the extra room needed for out of square material to still fit. Additional size machines are available with up to a 100 inch vertical cut. All Saw Trax brand full size 1000 series panel saws feature a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 1000 series saws are ideal for customers that need a vertical panel saw to perform precision cuts in sheet goods that are less than 1 ¾ inches thick. Standard features for the Saw Trax 1000 series vertical panel saws include a Makita 5007F circular saw on a spinning saw insert to quickly switch from vertical to horizontal cutting, real steel bearings on the carriage, a patented alignment system that never goes out of square, a dust collection system that actually collects the saw dust, and a “quick change” carriage that allows you to use other cutting tools. The 1000 series also comes equipped with a pre-attached folding stand that is as easy to open and close as a ladder yet provides complete stability while in operation. For portability and mobility, transport wheels are included. Both the vertical and horizontal measuring systems on the 1000 series panel saw help to ensure accurate cuts using one vertical tape with rip pointers and two horizontal tapes with a stop and stop extension bar which provides the capability to make repetitive cuts easily. Manufactured in and ships from Atlanta Georgia. -
Out of stock
-
Sale!
Out of stock
This 3 sided, heavy-duty shaper will pay for itself quickly in cabinet and production shops that normally require several shapers or time consuming cutter changes. The combinations of cutters and set-ups you can utilize on this machine are endless. -
Out of stock
10 Horsepower 3-Phase 24" Wide Belt Wood Sander with Pneumatic Oscillation Control
These machines were developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. This collaboration resulted in the introduction of the G9962Z & G9962ZX, which have become the "staple" of the guitar building industry. The main features that enable these sanders to process short pieces efficiently are the single drum and double infeed and outfeed pressure rollers positioned close to the drum. The result is a continuous downward pressure on extremely thin stock as short as 9", which is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of hard rubber to prevent distortion of thin stock while sanding. Features include digital read out, powered table elevation, variable speed conveyor, disc brake stopping system, pneumatic belt tracking, pneumatic belt oscillation, and separate motors for the drum, feed rollers, and table elevation.
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com