Shop

8110131 MAGSWITCH REVERSIBLE FEATHERBOARD

$20.99
Magswitch Reversible Featherboard – 8110131 Tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features

Fast, strong set up anywhere on a steel table or cast iron fence.

Not limited by the miter slot.

Featherboard is reversible for left and right hand feeds.

Accommodates the Vertical Featherboard Attachment for an added dimension of safety and protection against kickbacks.

Low profile design for use on your smallest tables and fences.
Add to cart Details
8100377 MAGSWITCH MAGJIG 235

$85.00
MagJig 235 secures your fixture into place. Rotate the knob to turn On/Off 235 pounds of magnetic hold force. Simply drill a hole in a fixture and place the MagJig 235 in to use for downward pressure clamping. Features
- Use in your custom jigs and fixtures by drilling a 56 mm hole using a Forstner bit into standard ¾” stock.
- Drill as many holes as you want for as much strength and flexibility as you need by simply dropping in MagJigs. We recommend use of two per fixture to avoid pivot.
- Create fences, assembly jigs, cutting fixtures, blade guards, work supports or anything that makes your work faster, safer and easier.
- Excellent for woodworking, welding and fabrication.
- Designed with screw holes to add more security in a fixture.
- Holds flat and round surfaces of steel.
- Magnet turns completely On and Off.
- Magnet stays clean.
- Does not use an electrical power source.
https://magswitch.com/product/magjig235/#tab-downloads
Add to cart Details
8110112 – MAGSWITCH UNIVERSAL MOUNTING BASE

$25.00
Magswitch Universal Mounting Base – 8110112 The centerpiece of the Magswitch Workholding System. Additional tool attachments shown are designed to fit the Universal Mounting Base and are sold separately. Features
- Low profile design enables use on small surfaces including fences and small table tops.
- Requires (2) MagJigs to secure the Universal Base to a steel or cast iron surface.
- Accepts both MagJig 150 (150 lbs of hold force) and MagJig 95 (95 lbs of hold force).
- Simply add the desired tool attachment, place anywhere on any steel or cast-Iron tabletop, and you’re ready to go.
- Add more Universal Mounting Bases and MagJigs to use more multiple tools at the same time.
Add to cart Details
8110134 – MAGSWITCH WOODWORKING STARTER KIT

$120.00
Magswitch Woodworking Starter Kit – 8110134 A perfect entré into the Magswitch Workholding System. Once you have this tool, get all the other great tool attachments and simply mount to the base as needed. The Starter Kit comes with:
- the Reversible Featherboard Attachment
- the Universal Mounting Base
- (2) MagJig 150’s.
Features
- Fast, strong set up anywhere on a steel table or cast Iron fence. Not limited by the miter slot.
- Featherboard is reversible for left and right hand feeds.
- Accommodates the Vertical Featherboard Attachment for an added dimension of safety and protection against kickbacks.
- Low profile design for use on your smallest tables.
Add to cart Details
8110015 MAGSWITCH UNIVERSAL FEATHERBOARD

$94.00
Magswitch Universal Featherboard – 8110015 Our best selling Universal Featherboard is designed to work on any cast-iron fence to hold down your work, so you don’t have to. It works on both sides of the blade and even the fence. It features (2) 20mm Magswitch magnets. Features
- Works to improve your cutting results on either side of the blade.
- Versatile — no miter slot limitation.
- Perfect for infeed/outfeed applications.
- Can be used on the left or right side of the blade.
- Precise, fast setup.
- Easy On/Off Operation.
- Great for small tables.
Add to cart Details
81101304 MAGSWITCH UNIVERSAL SAW INDICATOR

$95.95
The Universal Saw Indicator is used to measure alignment of the table saw blade relative to the table (and the miter slot) to allow fine adjustment of blade parallelism. When adjusting fence spacing relative to the blade, it can also be used to measure very small changes in fence parallelism . Attach it to steel cross fences (which ride in the miter slot) or to ferrous table saw tables. The indicator is attached via an adjustable slot, allowing it to slide to fit a wide variety of miter slot spacings.
FEATURES
- Works with cross fences for easy measurement of table and blade alignment.
- Allows for micro adjustment of the table saw fence in any position.
- Fast actuation of 2 magnets with a linked push pin.
- Compatible with a wide variety of table saw makes and modes.
SPECS
- Nominal Max Breakaway Force: 120 lbs/ 54 kg
- Nominal Maximum Shear: 18 lbs / 8.1 kg
- Net Weight: 1.2 lbs / 0.55 kg
- Footprint: 4.9″ x 5.9″/ 125 mm long x 150 wide
Add to cart Details
8110328 – MAGSWITCH PRO TABLE FEATHERBOARD

$72.95
Magswitch Pro Table Featherboard – 8110328 does the job of 3 featherboards and has a greater holding power and safety, anywhere you need it. It adds to your safety and quality of cut. Features
- Accepts the Magswitch Vertical Attachment with Risers for holding down as well as in to the fence.
- Acts as the base of an adjustable stackable featherboard for tall pieces.
- Features two powerful 30mm Magswitch magnets.
- Versatile — no miter slot limitation.
- Fast, accurate positioning.
- Cut wider material.
- Can be place beyond the miter slot.
- Provides powerful control.
- Easy on/off operation.
Add to cart Details
81101303 MAGSWITCH UNIVERSAL FEATHERBOARD PRO

$94.00
The all NEW Magswitch Universal Featherboard Pro provides strong featherboard force against the table saw fence in either left handed or right handed positions. Wide base magnets and gaskets provide excellent grip even when placed over the table saw miter slot. Additionally two micro adjustable bump feet allow the tool to function as a versatile stop for cross cuts and slots.
FEATURES
- Compressible gaskets provide excellent grip when magnets are engaged.
- Increased width for stability.
- Magnet footprint spans most miter slots.
- Functional in left or right-handed positions.
- Two smooth bump stops with independent adjustability using thumb wheels Knobs improve visibility of magnet ON/OFF state.
Add to cart Details
81101302 MAGSWITCH VERTICAL FEATHERBOARD PRO

$69.95

MAGSWITCH VERTICAL FEATHERBOARD PRO

–

81101302

The Pro Vertical Featherboard is a table saw safety attachment which pushes the workpiece down against the table during feeding to prevent ride-up and kickback. Attach it to ferrous Biesemeyer-style table saw fences between the low-friction guide faces and adjust the feathers vertically to match the height of the workpiece. It can be paired with a second Pro Vertical featherboard for downward pressure on a work piece before and after the saw blade.

Add to cart Details
MILESCRAFT PUSH BLOCK FOR RIPPING OR ROUTING

$28.90
The GrabberPLUS offers an upgraded safety solution to the Grabber family of Milescraft push blocks. It’s great for extra control when using router tables, table saws, jointers, and bandsaws. The high-friction, diamond grip prevents boards from slipping. The added spring-loaded retractable heels secure the ends of your workpiece and guide it through your cut. The GrabberPLUS is a must-have for every woodworker!
Spring-Loaded, Retractable Locking Heels
- Increase control and stability during cuts to eliminate tear-out when ripping or routing
Diamond Grip Rubber Bottom
- Non-marring, non-slip TPE material provides maximum control to safely hold your workpiece in place
Ergonomic, Tilted, Comfort Grip Handle
- Provides superior control and maximum grip, while keeping your hands away from the cutting tool and providing increased directional force against the fence
Durable Body
- Provides maximum durability to safely control your workpiece in all applications
- High visibility yellow makes it easy to find in busy shops
Safety Tips
- Ensure GrabberPLUS is firmly and securely on the workpiece
- Ensure a safe distance between the saw blade and the edge of GrabberPLUS
- Always ensure sufficient downward, forward, and side pressure
- Check and clean diamond grip pad with compressed air, or if that is not available, with water and soap, as necessary
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov/product
Add to cart Details
Milescraft 3406 GrabberPRO – Pushblock for the Woodworker

$39.90
GrabberPRO is the ultimate adjustable push block. Ideal for use on table saws, router tables, jointers, and even band saws. Designed with control, precision, and safety in mind! The multi-leg design allows the GrabberPro to pass over both sides of a saw blade, keeping contact with the workpiece and helping reduce kickback. The inward, downward, and forward pressure provide superior control all the way through the cut, keeping you and your fingers protected. GrabberPRO is a must-have for every woodworker, whether you’re a DIY-er or a Pro! Adjustable Multi-Leg Design
- 4 Adjustable and interchangeable legs let you customize the GrabberPro to suit your job
  
  Includes 1”, 1/2”, 1/4” and 1/8” Legs
- Cut clean, precise strips as small as 1/8” thick.
- Helps reduce kickback by maintaining contact on both sides of the blade through your cut
- Elevated base keeps hands further away from cutting surface for increased safety
Ergonomic, Tilted, Comfort Grip Handle
- Handle design keeps constant downward, inward, and forward pressure on workpiece to safely finish cuts and prevent binding or kickback.
- Provides superior control and maximum grip, while keeping your hands angled away from the cutting tool
Angled Support Foot
- Angled support foot can be lowered to support the GrabberPro for extra tall or thin cuts
- Maintains balanced, even contact with your workpiece
Diamond Grip Push Block Legs
- Non-marring, TPE material provides maximum strength to safely hold your workpiece in place
- Easy to clean surface ensures your GrabberPRO won’t slip
Sacrificial Retractable Heel
- The Retractable Heel provides extra forward control during cuts
- Helps prevent tear-out
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov/product
Add to cart Details
Out of stock

JESSEM ROUT-R-LIFT PRESTIGE 02320 METRIC

$449.00
Finally a lift is available to fit your Plunge Based Router. JessEm is proud to introduce to you our Rout-R-Lift Prestige. The Prestige allows the user to mount the base of their plunge based router motor to the carriage. Made from the same high quality products as our Mast-R-Lift II and Excel II, the Prestige offer customers another list of options for their wood shops.
- Rout-R-Lift PrestigeAll screws to mount each router mentioned to the base plate 3 - Insert Rings (1-3/8", 2" and 2-1/2") 1 - Insert Wrench 1 - Lift Adjustment Handle 10 - Stainless Steel Set Screws with Blue Nylok Patch 4 - Mounting Screws
Details