Shop

Out of stock

Grizzly G0453Z – 15″ 3 HP Planer with Spiral Cutterhead

$3,065.00
G0453Z 15" 3 HP Planer with Spiral Cutterhead

Upgrade to a spiral cutterhead with power to spare.
The G0453Z 15" 3 HP Planer with Spiral Cutterhead recognized ahead of the rest of the 15" planers tested by WOOD Magazine for its combination of clean cuts and the ability to control snipe. The 4-row spiral cutterhead with 74 German-made indexable carbide inserts cut some of the finest surface finishes money can buy. Each insert can be rotated up to three times to expose a new sharp edge for superior finish. Reducing the cut to the size of a single insert makes for a cleaner cut and reduces noise compared to the traditional straight knife cut. The 3 HP motor spins the cutterhead at 4800 RPM to plane your stock up to 15" wide by 8" thick, cutting as deep as 1/8" per pass. Additionally, the G0453Z features a built-in mobile base, adjustable bed rollers, two-speed automatic board feed, and solid cast-iron extension wings. Like all Grizzly planers, the G0453Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0453Z manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your planer. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the planer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. CSA certified Note on replacement inserts:
- Models manufactured April 2015 and later use H7319 (74) 14mm x 14mm x 2.0mm replacement inserts.
- Models manufactured March 2015 and earlier use T21348 (74) 14.17mm x 14.17mm x 2.0mm replacement inserts.
SPECIFICATIONS:
- Motor: 3 HP, 240V, single-phase, 15A
- Maximum stock width: 15"
- Maximum stock thickness: 8"
- Minimum stock thickness: 3/16"
- Minimum stock length: 8"
- Maximum cutting depth: 1/8"
- Cutterhead diameter: 3"
- Cutterhead type: 4-row spiral, 74 inserts
- Cutterhead speed: 4800 RPM
- Feed rate: 16 & 30 FPM
- Table size with extensions: 15" x 42"
- Dust port size: 4"
- Footprint: 22" x 22-1/2"
- Overall dimensions: 32-1/2" W x 42" D x 45-7/8" H
- Approx. shipping weight: 672 lbs.
FEATURES:
- Board return rollers
- Pedestal-mounted control panel
- Built-in mobile base
- Adjustable bed rollers
- Rubber-coated outfeed roller
- Built-in lifting rods
- Angled dust port hood
- Magnetic switch with thermal overload protection
- Four-column support with table locks
- Precision-ground, cast-iron table and extension wings
- Heavy-duty cast-iron construction
Details

Baileigh RDB-050 Manual Tube Bender

$1,999.99

Item Number	RDB-050
Minimum CLR	3"
Minimum OD	.75"
Mild Steel Solid Rod	1"
Mild Steel Pipe Schedule 40	Call for Details
Mild Steel Round Tube Wall	2.5" (.120)
Stainless Steel Pipe Schedule 40	Call for Details
Stainless Steel Round Tube Wall	2" (.120)
Chromolly Round Tube Wall	2" (.120)
Aluminum Pipe Sch. 40	Call for Details
Aluminum Round Tube Wall	2.5" (.120)
Max. Clr	7"
Power	Manual
Shipping Weight	290lbs
Special Notes	tooling not included, contact Baileigh at 920-684-4990 for correct sizing.
Things to Know Before Purchase	All capacities based on A53 grade A (mild steel) 48,000 psi tensile materials; heavy wall and high tensile materials may reduce machine capacity. Consult Baileigh Industrial to review material specifications.
Shipping Dimensions (Inches)	36x36x18

Details

Sjobergs Original 1900 Workbench and SM05 Cabinet Combo SJO-67637K

$3,342.00
- Features round and square 3/4 in (19 mm) bench dog holes
- Large shoulder vise won’t rack when clamping off-center
- No vise hardware to get in your way when working on long pieces
- Includes a 4-pack of round 3/4 in (19 mm) bench dogs and a 2-pack of square 3/4 in (19 mm) bench dogs
- SM05 bench has 3 sliding drawers, 2 cupboard doors, and 3 cubbies
- Original 1900 workbench was previously named the SB119 workbench
Add to cart Details
Out of stock

Grizzly G5447 – 6″ x 186″ A/O Sanding Belt 150 Grit

$52.90

This 150 grit 6" X 186" high quality "J" weight sanding belt is cloth backed and lasts longer and sands smoother!

Details
Out of stock

Grizzly G5446 – 6″ x 186″ A/O Sanding Belt 120-J Grit

$52.90

This 120 grit 6" X 186" high quality "J" weight sanding belt is cloth backed and lasts longer and sands smoother!

Details
Grizzly G5444 – 6″ x 186″ A/O Sanding Belt 80 Grit

$52.90

This 80 grit 6" X 186" high quality "J" weight sanding belt is cloth backed and lasts longer and sands smoother!

Add to cart Details
Grizzly Industrial G5443-6″ x 186″ A/O Sanding Belt 60-J Grit

$52.90

This 60 grit 6" X 186" high quality "J" weight sanding belt is cloth backed and lasts longer and sands smoother!

Add to cart Details
Sale!

Grizzly G0555LX – 14″ 1 HP Deluxe Bandsaw

Original price was: $1,275.00.Current price is: $1,155.00.

G0555LX 14" 1 HP Deluxe Bandsaw

An upgraded version of a Grizzly classic.
Another great addition to our G0555 line of 14" bandsaws, the G0555LX runs quietly and cuts accurately with plenty of power to do crosscuts, scrolls, and resaw thick hardwoods. The bandsaw operates with minimal vibration for precision cutting thanks to the cast-iron frame and heavy-duty stand. The precision-ground cast-iron table tilts 45° right and 15° to the left. The sturdy T-shaped fence is designed for easy attachment and removal from the rails and has a magnified cursor scale for fast, accurate adjustments. For a full range replacement and resaw blades for the G0555LX, shop here. Ball-bearing rollers on the upper and lower blade guide assemblies are easy to adjust. Made from high-strength aluminum, three styles of premium blade guide kits add flexibility and accuracy to your 14" bandsaw. These kits are available in three styles: ball bearing, ceramic, and scrolling. The T25555 Riser Block Kit is available to increase the capacity of this bandsaw from 6" to 12". Prewired for 110V, the G0555LX can plug into a standard 110V wall receptacle. This machine can be converted to operate on a 220V power supply by referring to the voltage conversion instructions in the manual. The easy-to-read G0555LX manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The Grizzly Customer Service and Technical Support Teams are U.S. based. Like all Grizzly bandsaws, the G0555LX comes with a 1-year warranty which covers parts and assures the unit is free from factory defects.

Add to cart Details
Out of stock

BAILEIGH INDUSTRIAL 1008627 DOWNDRAFT TABLE DDTM-5922

$3,799.00
https://youtu.be/71kgEkUFmfk Whether it is before or after, often at welding workstations grinding on the work piece has to be done. But this is a messy proposition for most shops. The DDTM-5922 downdraft grinding table from Baileigh Industrial can help. This easy to use down draft table takes all the little partials that float around the shop and pull them straight down into a contained unit and also help to clean the air. What is unique about the DDTM-5922 metal working downdraft table is that it is a self-contained unit and there is no need to hook it up to external extraction systems. It operates on 110 volt power and has two .5hp motors that produce 1790 CFM per motor. That is a lot of sucking power to keep the area clean. The filters are also fire resistant on this grinding station making it very safe as well. Order this downdraft dust collector from Baileigh Industrial.
- 59" x 22" downdraft table
- 3 mm thick stainless steelwork surface
- Perfect for grinding and sanding
- Dual motors 1790 CFM per motor
- Fire resistant air filters
- Easy clean out chip compartments
- 110V
Details
8110130 MAGSWITCH DUAL ROLLER GUIDE

$31.99
Magswitch Dual Roller Guide – 8110130 Tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features
- Fast, strong set up anywhere on a steel table or cast iron fence.
- Features a dual set of roller bearing supports for firm yet smooth gliding of wood through a blade.
- Includes micro adjustment for fine tuning to 90 degrees.
- Ideal for resawing on band saws, a second hand to support raised/long or tall panels on table saws, general infeed outfeed support on tables or fences.
- Low profile design for use on your smallest tables.
- Includes all required attachment hardware (except base)..
Add to cart Details
8110362 MAGSWITCH ULTIMATE THIN STOCK JIG/RIP GUIDE

$25.99
Magswitch Ultimate Thin Stock Jig / Rip Guide – 8110362 Tool attachment is for use with the Magswitch Workholding System. No other tool like it in the industry! Three tools in one! Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features

Features a stepped side for most common sizes of 1/8, 1/4 and 3/8”. The opposite side is sloped for odd sizes up to ¾ inch.

Features a fixed roller bearing and extends forward for accurate repetitive ripping of your thin stock.

Ideal for thin stock hold down or infeed/outfeed on a table saw.

Enhances safety by keeping your fingers away from the blade while also minimizing chatter for clean cuts.

Fast, strong set up anywhere on a steel table or cast Iron fence.

Low profile design for use on your smallest tables.

Includes all required attachment hardware.
Add to cart Details
8110125 Magswitch Resaw Guide

$30.99
Magswitch Resaw Guide – 8110125 Tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features
- Fast, strong set up anywhere on a steel table or cast Iron fence.
- Roller bearing support for firm yet smooth gliding of wood through a blade.
- Angled Infeed/Outfeed to allow for blade drift adjustment.
- Includes all required attachment hardware (except base) and micro adjustment for fine tuning to 90 degrees.
- Ideal for resawing on band saws, oscillating spindle sander, or disc sander; and for infeed/outfeed support.
- Low profile design for use on your smallest tables.
Add to cart Details