Shop

Out of stock

JET 354170/JDP-20MF 20-Inch Floor Drill Press

$1,629.00

Style (Type) Variable Drills to Center of Circle (in) 20 Drilling Capacity Cast Iron (In.) 1 Drilling Capacity Mild Steel (In.) 3/4 Distance Column to Spindle (In.) 10 Number of Spindle Speeds 12 Range of Spindle Speeds (RPM) 150 - 4,200 Column Diameter (In.) 3-3/8 Spindle Taper (In. x TPI) MT-3 Spindle Travel (In.) 4-5/8 Spindle Distance to Base (In.) 46-3/4 Spindle Distance to Table (Max.) (In.) 29-1/8 Table Size (L x W) (In.) 18-1/2 x 16 Table Travel (In.) 21-1/2 T-Slots Number and Size (In.) 6 and 1/2 T-Slot Centers (In.) 3-1/2 Work Table Weight Capacity (Lbs.) 80 Base Dimensions (In.) 13-3/4 x 22-3/4 Base Work Table (In.) 13 x 8-1/2 Base Slots Number & Size (In.) 2 and 5/8 Motor (HP) 1-1/2 HP, 115/230V, 1Ph Overall Dimensions (L x W x H) (In.) 33-1/2 x 18-1/2 x 67 Weight (Lbs.) 282

2 Year Warranty JET

JET Tools warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

Details
Makita PDC1200A01 ConnectX™ 1,200Wh Portable Backpack Power Supply

$1,629.00

The ConnectX™ Portable Backpack Power Supply (PDC1200A01) is a high-capacity backpack that delivers 1200 watt hours of output. It provides longer run time to last an entire workday. Actual run times vary by product, application, and workday amount. It works with 36V (18V X2) LXT (adapter included) and 40V max XGT (adapter sold separately) systems.

It is durably constructed, IPX4-rated for weather resistance. The battery box can be detached from the harness and to be used a stationary power supply. It features a flat base, allowing the product to stand upright. There is an integrated carrying handle for convenience.

An L.E.D. battery charge level indicator allows the operator to monitor battery charge. The power supply reaches a full charge in 3 hours (AC power supply included).

Add to cart Details
Grizzly G0771Z – 10″ 2 HP 120V Hybrid Table Saw with T-Shaped Fence

$1,629.99
The best features of the contractor and cabinet saws combined.
The G0771Z 10" 2 HP Hybrid Table Saw blends the best features of the contractor-style table saw and cabinet-style table saw. Like the cabinet saw, it has an enclosed cabinet, heavy-duty cast-iron trunnions that mount to the cabinet and plenty of power to easily rip through hardwoods or cut dadoes. Like the contractor-style saw, it's still light enough to move where you need it and it's easy on the budget. The fence on this machine is also a hybrid of the best features we've had in the last 30+ years. These all-time best features include the easiest lift-off and simple adjustability of one fence, the rock-solid front locking ability of another and the accessory T-slots of a third. The research and development put into this finished fence creates a simpler and more enjoyable user experience. The G0771Z features an innovative quick-release blade guard and riving knife system that can be changed in seconds. A 4" dust port is integrated into the steel cabinet-type stand for maximum dust collection. The precision-ground cast-iron table exceeds 40" with the extension wings. To top it all off, it's prewired to run on an ordinary household 120V, 20A circuit! Like all Grizzly table saws, the G0771Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0771Z manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your saw. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the table saw are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. ETL certified Made in an ISO 9001 factory SPECIFICATIONS:
- Motor: 2 HP, 120V/240V (prewired for 120V), single-phase, 15A/7.5A
- Rip capacity: 31" right, 16-3/4" left of blade
- Max. depth of cut @ 90°: 3-1/8"
- Max. depth of cut @ 45°: 2-1/4"
- Table size with extension wings: 40-1/2" W x 27" D
- Distance from front of table to center of blade: 15-1/2"
- Floor-to-table height: 35-3/8"
- Arbor diameter: 5/8"
- Arbor speed: 3450 RPM
- Max. width of dado: 13/16"
- Dust port size: 4"
- Overall dimensions: 64" W x 40-1/2" D x 36" H
- Footprint: 21" L x 19-1/2" W
- Approximate shipping weight: 330 lbs.
FEATURES:
- Cast-iron table and extension wings
- Cast-iron trunnions
- Easy-glide fence system
- T-slot miter gauge
- Beveled front table edge
- Includes a 10" x 40T carbide-tipped saw blade
Add to cart Details
Out of stock

JET 708599 JSG-6DC 6 ” 1-1/2 Hp Benchtop Belt/Disc Sander

$1,659.99
Features:
- Two precision-ground cast-iron tables have positive stops at 90 Degrees and 45, for sanding flat pieces or mitered angles, allows belt sander to be used vertically, horizontally and anywhere in between
- Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use
- Specially designed belt guard allows full use of the 6 in. belt width and length
- Single 4 in. dust port on the back of the base collects dust effectively from either machine
- Powerful 1-1/2 HP motor easily handles the toughest sanding operations
Details

Powermatic 1792071K Model PM1900TX-BK1 Dust Collector 3HP 1PH 230-Volt 30-Micron Bag Filter Kit

$1,659.99

Air Flow @ 4" (CFM)	234
Air Flow @ 6" (CFM)	860
Air Flow @ 8" (CFM)	1,754
Number of Air Inlets	1(8") or 3(4")
Efficiency (Micron)	30

Static Pressure (WC)	11.31
Sound Rating (DB)	86 - 92
Bag Diameter (In.)	20
Collection Bag Capacity (Cu. Ft.)	10
Collection Bag Length (In.)	30
Filter Bag/Canister Length (In.)	48
Impeller Diameter (In.)	14
Impeller Fins	7
Impeller Material	Steel
1-Hose Connection Diameter (In.)	8
3-Hoses Connection Diameter (In.)	4
Motor Power (HP)	3
Motor Phase	1
Motor Voltage (V.)	230 only
Motor Current (Amps)	15
Recommended Circuit Size (Amps.)	30

Details

Sale!

Grizzly G0814X – 6″ Jointer W/Stand & V-Helical Cutterhead

Original price was: $1,790.00.Current price is: $1,690.00.
Grizzly G0814X 6" Jointer W/Stand & V-Helical Cutterhead

An upgraded jointer with a V-helical cutterhead
Stepping up from our G0814 6" Jointer, the G0814X comes equipped with a 4-row V-helical cutterhead for unmatched finish and long-lasting cutter edge durability. The V-helical cutterhead features 24 indexable carbide inserts that can each be rotated up to 3 times to expose a new sharp edge. No more replacing or sharpening blades every time they get dull or nicked. You'll get quieter operation, and most importantly, a significantly better finish with less tear-out using this cutterhead vs. a straight-knife model. For increased mobility, the cabinet stand comes with a built-in mobile base. Engage the foot pedal caster to move your machine around. Lock the machine down when you are ready to work. The fence is fully adjustable from 45° to 135°. It has built-in stops at 45°, 90° and 135°. Like all of the Grizzly jointers, the G0814X comes with a 1-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0814X's manual is packed with useful information and the technical support team is U.S. based. Parts and accessories for the jointer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. Made in Taiwan SPECIFICATIONS:
- Motor: 1 HP, 110V/220V (prewired 110V), single-phase, 14A/7A
- Maximum width of cut: 6"
- Maximum depth of cut: 1/8"
- Maximum rabbeting depth: 1/2"
- Cutterhead diameter: 2-1/2"
- Cutterhead type: 4-row V-helical
- Insert size & type: 15mm x 15mm x 2.5mm, indexable carbide
- Cutterhead speed: 5000 RPM
- Table size: 6-5/8" x 47-3/8"
- Table adjustment type: Handwheel
- Fence size: 29-1/8" x 4"
- Minimum stock length: 8"
- Minimum stock width: 3/4"
- Minimum stock thickness: 1/2"
- Dust port size: 4"
- Footprint: 13-1/2" x 18"
- Overall dimensions: 47-1/2" W x 20" D x 42" H
- Approx. shipping weight: 260 lbs.
FEATURES:
- 4-row V-helical cutterhead with 26 indexable carbide inserts
- Cabinet stand with built-in mobile base
- Precision-ground cast-iron tables with dovetailed ways
- Heavy-duty center-mounted fence with stops at 45°, 90° & 135°
- V-belt drive system
- Cabinet-mounted power switch
- Includes two push blocks
Add to cart Details
Out of stock

Grizzly G0452Z – 6″ x 46″ Jointer w/ Spiral Cutterhead

$1,695.00
Another top-of-the line 6" Jointer from Grizzly, the G0452Z has everything you need: a 4-row spiral cutterhead with 32 indexable carbide inserts, dovetailed-way tables, handwheel control for dead-on accurate outfeed table adjustment, a large 5" x 35" cast-iron fence, convenient pedestal-mounted switch with large shut-off paddle, a solid one-piece cabinet stand with built-in mobile base, and much more! If you're looking for a 6" spiral cutterhead jointer at quality and price that can't be beat, this is it! Certified to CSA & UL standards SPECIFICATIONS:
- Motor: 1-1/2 HP, 120V/240V (prewired 120V), single-phase, 15A/7.5A
- Maximum width of cut: 6"
- Maximum depth of cut: 1/8"
- Maximum rabbeting depth: 1/2"
- Cutterhead diameter: 2-1/2"
- Cutterhead type: 4-row spiral with 32 inserts
- Insert size & type: 14 x 14 x 2mm, indexable carbide
- Cutterhead speed: 4800 RPM
- Table size: 7-1/2" x 46"
- Fence size: 35" L x 5" H
- Minimum stock length: 8"
- Minimum stock thickness: 1/2"
- Dust port size: 4"
- Footprint: 18" x 13-1/2"
- Overall dimensions: 46" W x 27-1/2" D x 49" H
- Approx. shipping weight: 268 lbs.
FEATURES:
- Precision-ground cast-iron tables & fence
- Tables slide on dovetailed ways
- Handwheel-adjusted outfeed table
- Lever-adjusted infeed table with depth gauge
- Rabbeting table
- Pedestal-mounted switch with large shut-off paddle
- Center-mounted fence with rack & pinion adjustment
- Fence stops at 45°, 90°, and 135°
- V-Belt drive
- Solid cabinet stand with built-in mobile base
- Pair of push blocks included
Details
Fein Circular Saw Blade For Pipe Milling Machines 63502061009

$1,699.00

HSS, with carbide teeth, for gearbox type: b – for machining cast iron pipes (including those with cement chucks) and for machining non-alloyed steel pipes up to 400 N/mm2.

Add to cart Details
Out of stock

JT9-708599 -JSG-6DC BELT/DISC SANDER

$1,699.95
JET JSG-6DC 6"x48" Belt / 12" Disc Benchtop Sander, 1-1/2HP, 1Ph 115/230V (708599)

About this item
- VERSATILITY: Precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles.
- LONGER LIFE: Graphite-covered steel platen runs cooler, increasing machine and belt life.
- EFFICIENCY: 4" dust port on the back of the base collects dust effectively from both the belt and disc.
- POWERFUL: 1-1/2 HP motor easily handles the toughest sanding operations.
- PORTABILITY: Built-in handles make machine relocation easier.
Details
Out of stock

GENERAL INT’L 12″ Wood Lathe – 1 HP w/ Variable Speed

$1,699.99
- GUARANTEED QUALITY - High quality ribbed cast-iron headstock, tailstock, and bed.
- ULTRA SMOOTH TURNING - Precision-machined bed guideways allow the tailstock and tool rest to slide smoothly.
- PRECISE ROTATION - Precision-machined, high quality steel spindle, mounted on sealed, permanently lubricated bearings.
- INTUITIVE DESIGN - Equipped with plunger-type pin indexing mechanism for reeding and fluting.
- SIMPLE TOOL-MOUNTING - Spindle nose is threaded ⅝″ at both ends and bored for a “Morse No.2” taper.
Details

Out of stock

Baileigh EDGE SANDER ES-6100

$1,709.00

This edge sander is perfect for schools and small shops. It’s light enough to move, but solidly built with a cast iron table, something you won’t find on most sanders in this price range.

99” x 6” belt turns 3,773 feet per minute.
Runs on 220-volt single-phase power, so you can use it just about anywhere.
33” x 12” all cast iron table will stay true and level over many years of use.
Belt head can tilt, allowing you to sand at 45°, 90°, and 180°.
Built-in table rise system with a spring assist lets you lift and lower the table without straining. Just turn the handwheel.
Oscillating belt moves up and down to give you a smoother finished product and longer belt life.
Storage cabinet in the base allows you to keep extra abrasive belts and tools nearby.
Rigid steel stand stabilizes the sander for accuracy.
4” dust port helps you trap dust and maintain safe, clean air quality in your shop.
Covered by a 1-year parts warranty.
We keep replacement parts in stock at our Wisconsin wearhouse, so we can ship them to you without delay.
You can count on lifetime technical support by phone from our team of customer service reps with hands-on woodworking experience.

Questions about this edge sander? Not sure which wood sander is right for you? Call us at 1-920-684-4990 and talk to a Baileigh expert.

Read Less

Item Number	ES-6100
Shipping Weight	480lbs
Table Size (Length)	33"
Table Size (Width)	11.8"
RPM	1150
Belt/Blade Size	99" x 6"
Fence Size	27.5" x 2.3"
Table Tilt (degrees)	0-90
Vertical Stroke (Table)	3.1" Spring Assist
Power	220V Single Phase
Length	50"
Width	29"
Height	36"
Horse Power	2
Weight (lbs)	480
Oscillation	3/8"
End Radius	2"
Shipping Dimensions (Inches)	60x44x49

Details

Out of stock

Mr Heater® 80,000 BTU Big Maxx® Natural Gas Utility Heater MHU80

$1,725.00
If you are looking to turn your garage or barn into a work space you can use all year-round, you will have to find a safe quiet and reliable heat source. This 80,000 BTU Natural Gas Utility heater is the way to go. It uses a built-in electric high velocity fan to pull cool air into the rear of the heater, across a heat exchanger, then forcing warm air into the surrounding areas. These heaters only require 115v AC power and can be vented vertically or horizontally - please check local codes and restrictions. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections - installation is a cinch. With the Durable Spark ignition and robust factory standard self diagnostic control module, we can offer a 3 year factory warranty on all parts and burners and a 10 year warranty on any defects in the heat exchanger. This heater offers the operating versatility and safety that you have come to expect from Mr. Heater®.

80,000 BTU per hour

For use with natural gas

Heats up to 2,667 sq. ft.

Spark ignition features self-diagnostic control module

Includes 2 angle brackets for ceiling mount

Low Profile Design - Can be installed in low-ceiling buildings

Minimum 8 ft clearance from floor to base of heater required

1/2in gas connection

Category 1 vertical, category 3 horizontal venting

Natural Gas to Liquid Propane conversion kit included

Thermostat sold separately

125,000 BTU per hour

For use with natural gas

Heats up to 4,167 sq. ft.

Spark ignition features self-diagnostic control module

Includes 2 angle brackets for ceiling mount

Low Profile Design - Can be installed in low-ceiling buildings

Heater accepts WiFi thermostats

Minimum 8 ft clearance from floor to base of heater required

1/2in gas connection

Category 1 vertical, category 3 horizontal venting

Natural Gas to Liquid Propane conversion kit included

Thermostat sold separately - recommended 24V
Details
Out of stock

Shop Fox W1867—1.52-Stage Portable Cyclone Dust Collector

$1,745.00
Description

This Cyclone Dust Collector provides the efficiency of a 2-stage cyclone system with the portability of a single-stage dust collector. Features include high surface area pleated filters with paddles to mechanically knock off dust cake, remotely controlled magnetic switches, easy lid lifting levers for emptying collection drums, and a compact design for moving around the shop. Three models are available to suit most dust collection needs.

Specifications

Motor: 1-1/2 HP, 110V, 3450 RPM, 15A

Intake hole size: 6"

Impeller: 12-3/4" cast aluminum

Collection drum size: 20 gallons

Air suction capacity: 868 CFM

Static pressure: 9.7"

Approx. shipping weight: 375 lbs.

California Proposition 65 Warning
Details
Out of stock

JET 354402 Model J-2550, 20″ Floor Model Drill Press 115V 1Ph

$1,749.00

Style (Type) Belt Drive Drills to Center of Circle (in) 20 Drilling Capacity Cast Iron (In.) 3/4 Drilling Capacity Mild Steel (In.) 5/8 Distance Column to Spindle (In.) 10 Number of Spindle Speeds 12 Range of Spindle Speeds (RPM) 150, 260, 300, 440, 490, 540, 1,150, 1,550, 1,840, 2,220, 2,950, 4,200 Column Diameter (In.) 3-5/8 Spindle Taper (In. x TPI) MT-3 Spindle Travel (In.) 4-3/4 Spindle Distance to Base (In.) 43-1/2 Spindle Distance to Table (Max.) (In.) 24 Table Size (L x W) (In.) 18-11/16 x 16-3/4 Table Travel (In.) 21-1/2 T-Slots Number and Size (In.) 3 and 1/2 T-Slot Centers (In.) 4 Work Table Weight Capacity (Lbs.) 66 Base Dimensions (In.) 22-3/4 x 17-3/4 Base Slots Number & Size (In.) 2 and 5/8 Motor (HP) 1 HP, 115/230V, 1Ph Overall Dimensions (L x W x H) (In.) 33-1/2 x 18-1/2 x 67 Weight (Lbs.) 304

2 Year Warranty JET

JET Tools warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

Details
Out of stock

Jet 717515 Model JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V

$1,769.99

Number of Air Inlets 1 at 6", 2 at 4" Filter Efficiency (Micron) 1 Static Pressure (Wc.) 2.7 Sound Rating (Db.) 75 Impeller Diameter (In.) 13 Impeller Material Steel Velocity @ 6" (FPM) 6396 1-Hose Connection Diameter (In.) 6 Assembled Dimensions (L x W x H/In.) 22 x 47 x 67-9/16 Footprint (L x W/In.) 47 x 22 2-Hoses Connection Diameter (In.) 4 Canister Filter Length (In.) 15-3/4 Motor Power (HP) 1.5 Canister Filter Diameter (In.) 14-9/16 Canister Collection Bag (Dia. x L/In.) 23-5/8 x 19-11/16 Motor Phase (PH) 1 Drum Collection Bag (Dia. x L/In.) 26 x 27-9/16 Motor Voltage (V.) 115 Prewired Voltage (V.) 115 Max. Static Pressure (Wc.) 8.3 Collection Drum Capacity (gal.) 20

Details
Out of stock

714400K JET JWBS-14SFX, 14″ Vertical Bandsaw 1-3/4 HP

$1,769.99
The newest addition to the JET Bandsaw lineup, the JET 14" SFX Steel Frame Bandsaw redefines the line between functionality and affordability. The JET 14" SFX Bandsaw provides the woodworker all the premium features of a higher end saw with superior performance to complete any project. FEATURES

Deeper table with a massive 360 sq. in. of cast iron work surface for greater work piece support

Over 13” Resaw capacity for cutting large pieces of wood, slicing veneers, and cutting book matched panels

Heavy duty tubular steel welded construction with a total weight of over 300 lbs

Dual 4” dust ports for maximum dust collection efficiency

Tool-less, independently adjustable, upper and lower ball bearingblade guides

Convenient 115V AC outlet location for optional accessories

Premium metal, fully featured miter gauge included

714403 Light not included
Details

Out of stock

Ashley Hearth Products Pellet Stove 48k BTU, EPA Cert, # AP5780B

$1,779.99

Clean lines, gentle curves and modern technology meet with the AP5780E. This slim line pellet stove is designed to fit into tighter spaces yet produces the same amount of heat as a full size pellet stove. It can heat up to 2,200 Sq. Ft. The all digital control system comes with a temperature readout and a remote control for simple adjustments. It comes with a 46 Lb. hopper to provide up to 32 hours of burn time between fillings. This stove is a show piece with its curved black sides and flat black accents. Pellet heaters work by using a software driven control board to precisely deliver a pre-determined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home. Specifications

Product EPA Approved	Yes
Product Heating Area (ft²)	2200
Product Cooktop	No
Product Air Wash System	Yes
Product Package Contents	Pellet Stove, Remote Control
Product Ash Drawer	No
Product UL Listed	Pending
Product ETL Listed	Pending
Product Blower	Yes
Product Catalytic/Non Catalytic	Non Catalytic
Product Vent Location	Rear
Product Stove Type	Freestanding
Product Auto Ignition	Yes
Product Maximum BTU	48000
Product Hopper Capacity (ft³)	46
Product Brick-Lined Firebox	No
Product Venting Required	Yes
Product Touchpad Controls	Yes
Product Wood Or Pellet Burning	Pellet
Product Vent Diameter (in)	3
Product Color / Finish	Black
Product Manufacturer Warranty	Limited Lifetime firebox warranty, 1 Year all other parts, 1 year Electrical parts
Product CSA Certified	Yes
Product Vented Or Vent-Free	Vented

Details

Out of stock

1791211A Powermatic Helical Cutterhead

$1,795.00

Helical Cutterhead ** (serial no. 170615HH7145 and higher).

Details
Out of stock

JESSEM ROUTER LIFT PRESTIGE TABLE PACKAGE 02320 METRIC

$1,795.00
- Includes Jessem prestige router lift 02320 Metric pre drilled
- Predrilled for Festool routers OF 1010 & OF 1400 only
- 32" x 24" phenolic table with aluminum extruded miter track
- Mast-R-Fence II router table fence with fully adjustable fence faces
- Fence position maintained by side mounted adjustable fence tracks
- Rigid, heavy-duty steel stand with upper and lower stretchers
Details
Out of stock

JESSEM ROUTER LIFT PRESTIGE TABLE PACKAGE 02322 IMPERIAL

$1,795.00
- Includes Jessem prestige router lift 02332 IMPERIAL pre drilled
- Predrilled for Festool routers OF 1010 & OF 1400 only
- 32" x 24" phenolic table with aluminum extruded miter track
- Mast-R-Fence II router table fence with fully adjustable fence faces
- Fence position maintained by side mounted adjustable fence tracks
- Rigid, heavy-duty steel stand with upper and lower stretchers
Details
Laguna Tools MBAND1412-175 14 x 12 Bandsaw, Black/Grey

$1,795.00

Two years in the making, Laguna is finally ready to introduce the 14|12. This is Laguna's first foray into the 110 Volt segment. The result is an amazing feat. Features include pyramid spine, 1 3/4 HP TEFC Motor, quick release tension, 115 volt outlet and micro polished 21" X 16" table mounted onto oversized Trunion paired with Aluminum Hi/Low Fence. Solid Cast Wheels are electronically, dynamically balanced and fitted with polyurethane one-piece tires designed to run cooler and last longer than conventional tires. The worm gear and pinion is ultra-smooth and engineered to have minimum flex even when fully extended. This is a trade mark of Laguna, just like the famous ceramic Laguna guides. Double windows allows you to check both tension and tracking while the machine is running. Options: Wheel System Industrial Flood Light: Quick Release Blade Tensioner w/ 6 and 11 O'clock stops, Precision Tension Scale, Hand Wheel Conveniently Mounted under Upper Cabinet, 4" Dust Port. Innovative Table Insert Forces Dust into Port, Laguna 10 Point Ceramic Blade Guides, Magnetic Blade Guard, Ultra Smooth Worm Gear-driven Rack and Pinion, Minimum Flex in Guide Post even when fully Extended, Premium Throat Plate 2-7/8" X 5-1/4" with Set Screws, Dynamically Balanced Cast Iron Wheels, Polyurethane Single Piece Cold Running Tires, Flat Poly-Groove Drive Belt, Massive Adjustable Lower Wheel Shaft, Blade Speed Optimized for Wood Cutting, Heavy Duty Enclosed Stand with Rubber Pads, Dual Windows Display Tracking and Tension Information, Euro Style Adjustable and Replaceable Door Hinges, Two-Tone Powder Coated Paint, World Class Fit /Finish. Please note that the flood light and wheel kit shown in the image is sold separately.

Add to cart Details
Out of stock

Mr Heater® 125,000 BTU Big Maxx® Natural Gas Utility Heater MHU125

$1,795.00
If you are looking to turn your garage or barn into a work space you can use all year-round, you will have to find a safe quiet and reliable heat source. This 125,000 BTU Natural Gas Utility heater is the way to go. It uses a built-in electric high velocity fan to pull cool air into the rear of the heater, across a heat exchanger, then forcing warm air into the surrounding areas. These heaters only require 115v AC power and can be vented vertically or horizontally - please check local codes and restrictions. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections - installation is a cinch. With the Durable Spark ignition and robust factory standard self diagnostic control module, we can offer a 3 year factory warranty on all parts and burners and a 10 year warranty on any defects in the heat exchanger. This heater offers the operating versatility and safety that you have come to expect from Mr. Heater®.

125,000 BTU per hour

For use with natural gas

Heats up to 4,167 sq. ft.

Spark ignition features self-diagnostic control module

Includes 2 angle brackets for ceiling mount

Low Profile Design - Can be installed in low-ceiling buildings

Heater accepts WiFi thermostats

Minimum 8 ft clearance from floor to base of heater required

1/2in gas connection

Category 1 vertical, category 3 horizontal venting

Natural Gas to Liquid Propane conversion kit included

Thermostat sold separately - recommended 24V
Details
Out of stock

Rikon Model 10-326: 14″ Deluxe Bandsaw

$1,799.00

14” Bandsaw #10-326 is RIKON’s newest model with many Patent Pending features that professionals will enjoy – including spring-loaded tool-less blade quides, quick-adjust fence system and quick-lock trunnion table

angling system, plus, a quick release blade tension lever, large adjustment handles, hinged safety blade guard with sight window, high work table height, and storage cabinet base. Its dual voltage, 1-3/4HP motor provides ample power for most every work encountered. Designed with two speed options – just change the drive belt on the pulleys to change from fast to a slower blade speed. Includes 6” tall rip fence with re-saw bar. Wired for use with 3-wire 120V receptacles.

Details
Out of stock

Delta Woodworking Heavy-Duty Oscillating Floor Spindle Sander 31-484 New

$1,799.00

The 31-484 heavy duty oscillating floor spindle sander was designed for precision and durability. The fully enclosed heavy duty steel frame construction is optimized for dust management and keeps vibration to a minimum. The Heavy duty cast iron trunnion system supports oil bath gear box, which provides increased stability and accuracy. A unique 0° to 45° tilting spindle arbor design allows for adjusting the sanding angle to bevel sand while the table remains flat.

Details