Shop

Out of stock

RIKON 30-212VS 12″ VS Benchtop Drill Press – 3/4 HP

$699.00

12” Variable Speed Benchtop Drill Press #30-212VS features a more powerful motor and a Vari-speed pulley system that adjusts to chuck speeds with a simple turning of a lever! Includes digital RPM readout, LED work light, laser

X-Y drilling guide, clamp-friendly thin edge woodworking table and a 5/8” chuck.

Details
Out of stock

Makita PDC1200A01 ConnectX™ 1,200Wh Portable Backpack Power Supply

$1,629.00

The ConnectX™ Portable Backpack Power Supply (PDC1200A01) is a high-capacity backpack that delivers 1200 watt hours of output. It provides longer run time to last an entire workday. Actual run times vary by product, application, and workday amount. It works with 36V (18V X2) LXT (adapter included) and 40V max XGT (adapter sold separately) systems.

It is durably constructed, IPX4-rated for weather resistance. The battery box can be detached from the harness and to be used a stationary power supply. It features a flat base, allowing the product to stand upright. There is an integrated carrying handle for convenience.

An L.E.D. battery charge level indicator allows the operator to monitor battery charge. The power supply reaches a full charge in 3 hours (AC power supply included).

Details
Out of stock

Makita CBU02Z 40V max ConnectX™ Brushless Backpack Blower, Tool Only

$799.00

Landscapers are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding collection of blowers, including the 40V ConnectX™ Brushless Backpack Blower (CBU02). With zero emissions, lower noise, and considerably less maintenance than gas-powered models, this Backpack Blower is a welcome solution for landscapers. A Makita-built brushless motor delivers the power of a 64cc backpack blower.

The Backpack Blower delivers a high blowing force of 22 Newtons to handle heavy debris. It has a tube-mounted variable speed trigger that adjusts between 0 - 671 CFM for power and run time management. There is a cruise control lever speed lock-on variable speed trigger for comfortable continuous operation. It has a sound pressure rating of 60 dB(A); measured per ANSI B 175.2 standard

The nozzle features a downward endpoint to reduce arm fatigue and provide powerful airflow. It telescopes to 3 stages. The in-line fan design provides better tool balance and improved ergonomics.

The CBU02 can deliver over 4 hours of runtime with the ConnectX™ 1,200Wh Portable Backpack Power Supply (model number PDC1200A01, power supply sold separately).

Convenience features include a power button on the control handle that allows the user to start the Backpack Blower while wearing it. There is a tool-less control handle adjustment for user convenience. The handle features a rubberized soft grip that provides increased comfort on the job. It features an adjustable ergonomic harness with waist belt for operator comfort. For added user convenience there is an integrated carry handle for transportation and hanging storage, as well as a durable housing with base that allows the backpack blower to stand upright.

The Blower features IPX4 weather-resistant construction and exclusive Extreme Protection Technology (XPT™). XPT is a protective seal inside the tool and is engineered for improved operation in harsh conditions by channeling water and dust from key internal components.

Details
Out of stock

Makita 18V \ 3‑1/4″ Planer (KP0800K) w/ Case

$214.00
The Makita KP0800K 3-1/4-Inch Planer delivers power, cutting capacity and ease of use. It is ideal for professional construction framing, window and door installation, and fine woodworking.

6.5 AMP Power

The KP0800K features a 6.5 AMP motor that delivers more output power, with a two-blade cutter head and 17,000 RPM for increased stock removal and superior finishes. The KP0800K is equipped with double edge carbide blades for added performance, and can plane up to 3-1/4 inches wide and 3/32 inches deep in a single pass. The rigid die-cast aluminum housing with all ball bearing construction is engineered for long tool life, and the precision-machined aluminum base delivers more planning accuracy.

Ease-of-Use Features

The KP0800K weighs only 5.7 pounds for a high power-to-weight ratio, with an ergonomically-centered balance and rubberized front and rear handles for more comfortable operation. The machined aluminum and balanced planer drum is engineered for reduced vibration and added durability, and the spring-loaded stand elevates the base to protect the blades and workpiece. Additional ease-of-use features include a lock-on button for continuous operation, and an easy blade setting system for fast blade installation.

Engineered for Framing and Woodworking

The KP0800K is engineered for professional construction framing, window and door installation, and fine woodworking.
- 6.5 AMP motor delivers more output power for increased stock removal and superior finishes
- Planes up to 3-1/4" wide and 3/32" deep in a single pass
- Two-blade cutter head with 17,000 RPM delivers smooth finish and fast stock removal
- Spring-loaded stand elevates the base to protect the blades and workpiece
- Easy blade setting system for fast blade installation
- Precision machined aluminum base for planing accuracy
- Equipped with double edge carbide blades for added performance
- Rigid die-cast aluminum housing with all-ball bearing construction for longer tool life
- High power-to-weight ratio; weighs only 5.7 lbs.
- Machined aluminum and balanced planer drum for reduced vibration and added durability
- Lock-on button for continuous operation
- Click depth adjustment knob with easy-to-read scale with settings from 0" to 3/32" (0.1mm increments) for precise depth adjustment
- Ergonomically centered balance with rubberized front and rear handles for added comfort
- High quality poly-v belt provides added durability
- Can be equipped with large, high speed steel blades (optional accessory)
- Double insulated
Customer return. No manual
Details
Grizzly G0709 – 14″ x 40″ Gunsmithing Gearhead Lathe

$8,199.99
G0709 14" x 40" Gunsmithing Gearhead Lathe

An accurate and powerful lathe.
What makes the G0709 14" x 40" Gunsmithing Gearhead Lathe a "gunsmithing" lathe is that it comes with features typically not found on standard lathes, such as the high-precision NSK bearings, extra-large 1-9/16" spindle bore and a "spider" mount system. The spider mount system has four brass-tipped screws that stabilize long shafting and rifle barrels through the outboard end of the spindle. Supplied with a 2 HP motor, the 8-speed gearhead of the G0709 produces spindle speeds from 70-2000 RPM. The tailstock lock system features a drive hub, which allows you to use a 1/2” torque wrench to clamp the tailstock in place at a pre-determined torque setting. This ensures consistent draw-down alignment every time, even with multiple lathe operators using the machine. The G0709 features a foot brake that also acts as a safety device and can bring the machine to an instant stop. The G0709 also comes with a D1-5 spindle, a 200 series quick change tool post, flood coolant system, LED work light, and a pull-out chip tray. Like all Grizzly gunsmithing lathes, the G0709 comes with a 1-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0709 manual was written by our U.S. based Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your lathe. The Grizzly Technical Support team is U.S. based. Parts and accessories for the lathe may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.
SPECIFICATIONS
- Motor: 2 HP, 220V, single-phase, 10A
- Swing over bed: 14"
- Distance between centers: 40"
- Swing over saddle: 13-13/16"
- Swing over cross slide: 8-13/16"
- Spindle bore: 1.57" (40mm)
- Spindle nose taper: MT#5
- Spindle nose: D1-5 Camlock
- Spindle speeds: 8, 70-2000 RPM
- Carriage travel: 36"
- Cross slide travel: 6-11/16"
- Tailstock barrel taper: MT#3
- Tailstock barrel travel: 3-15/16"
- Overall dimensions: 71-1/2" L x 26-3/16" W x 52" H
- Approximate shipping weight: 1550 lbs.
FEATURES
- Easy-to-use lever controls
- Hardened and ground cast-iron bed
- Cuts 4-112 Standard TPI and 0.1-7 Metric
- Cuts LH threads
- On/off reverse switch on carriage
- Socket for tailstock lock
- Cast aluminum gear cover
STANDARD EQUIPMENT
- 6" 3-Jaw chuck with reversible jaws
- 8" 4-Jaw chuck with independent jaws
- 11" face plate
- Steady rest/follow rest
- Full length splash guard
- Quick change tool post with 2 tool holders
- (2) MT#3 dead centers (1 carbide tipped)
- (1) MT#3 live center
- (1) MT#5 - MT#3 sleeve
- Pull out chip pan
- 1/2" drill chuck w/ MT#3 arbor
- Toolbox
Add to cart Details
Out of stock

Makita PJ7000 Plate Joiner

$229.00

The Makita Plate Joiner (model PJ7000), combines power and precision with ease-of-use features for strong and accurate biscuit joints for furniture making, cabinet construction and fine woodworking applications.

The PJ7000 has powerful 5.6 AMP motor with 11,000 RPM for quick and precise cutting in a variety of woods. The rack-and-pinion vertical fence system is engineered for accurate fence adjustments, and the cast aluminum pivot fence has three positive stops at 0 degrees, 45 degrees, and 90 degrees. The blade diameter is 4 inches with a maximum cutting depth of ¾ inches, and there are six depth settings with one-touch stops for the most common biscuit sizes including #0, #10 and #20.

The non-marring rubber inserts on the shoe are engineered to prevent material from slipping, and the “tool-less” blade cover and shaft lock allow for easy blade changes. Additional features include easy-to-operate cam locks for quick fence adjustments, a large top grip handle for improved handling, and a slim ergonomic body design.

Details
C4 PANEL SAW SAFETY SPEED PANEL SAW w/ Accessory Package & Folding Stand

$3,579.00
DESCRIPTION
The C4 model packs all of the features of the full-size saws into a portable 5′ frame. This panel saw can travel to work sites and fit into shops with limited floor space. The C4 is ideal for cutting 4’–8′ sheets of material. Standard Equipment
- 3 ¼ Hp, 15 amp industrial duty saw motor.
- Zinc plated 1 ¾” steel guide tubes.
- 4 Nylatron roller bearing systems.
- Adjustable vertical and horizontal rulers.
- Quick change from vertical to horizontal cutting.
- Thin material pressure guard.
- Injection-molded plastic material rollers.
- Spring loaded counter balance system.
- Integrated dust collection bonnet.
- Extended warranty.
- TUV certified to UL/CSA standards
- Wall mounted
- QUICK STOP™ Gauge 5 ft./2.44m
- Dust collection kit (vacuum additional)
- Fixed stand/folding stand with C-Series
- Set of wheels
- 860ATB Foam Core Saw Blade
- Folding stand
Includes Lift gate
Add to cart Details
C4 PANEL SAW SAFETY SPEED VERTICAL PANEL SAW w/ Accessory Package

$3,279.00
DESCRIPTION
The C4 model packs all of the features of the full-size saws into a portable 5′ frame. This panel saw can travel to work sites and fit into shops with limited floor space. The C4 is ideal for cutting 4’–8′ sheets of material. Standard Equipment
- 3 ¼ Hp, 15 amp industrial duty saw motor.
- Zinc plated 1 ¾” steel guide tubes.
- 4 Nylatron roller bearing systems.
- Adjustable vertical and horizontal rulers.
- Quick change from vertical to horizontal cutting.
- Thin material pressure guard.
- Injection-molded plastic material rollers.
- Spring loaded counter balance system.
- Integrated dust collection bonnet.
- Extended warranty.
- TUV certified to UL/CSA standards
- Wall mounted
- QUICK STOP™ Gauge 5 ft./2.44m
- Dust collection kit (vacuum additional)
- Fixed stand/folding stand with C-Series
- Set of wheels
- 860ATB Foam Core Saw Blade
Includes Lift gate
Add to cart Details
Out of stock

Jessem Model 08350 3/8″ Dowelling Jig with Main Body & Mounting Angle

$138.00
- Create 1/4-Inch, 3/8-Inch and 1/2-Inch (3/8-Inch drill bushings and drill bit included) dowel holes on the end or face of your work piece
- Locations of dowels can be pre-set in 1/8-Inch increment
- Built in alignment slot
- Included are (5) 3/8-Inch drill guides, 3/8-Inch drill bit, 3/8-Inch stop collar, and 3/8-Inch indexing pin
- Maximum edge to center distance for dowel holes is 3-1/2-Inch
Details
Out of stock

Rikon Cyclone Dust Collector 60-2500 2.5 HP 1470 CFM

$2,795.00

Rikon 2.5 HP Cyclone Dust Collector 1470 CFM

The 2.5 horsepower cyclone dust collector has a newly designed impeller that reduces the stress on the motor while meeting or exceeding air flow compared to other cyclones in their class. This reduced stress allows the motor to operate cooler, more efficient and has up to 33% less cost to operate. This improves the longevity of the motor. Equipped with remote control start functions that operate on bluetooth RF band technology which increases range and ability to operate the unit from a different room. This unit has 1470 CFM. Three four inch dust ports. Built in casters for mobility. Large plastic bag liners are used for the dust containment barrel.

FEATURES

2.5 HP - 1470 CFM

3 - 4 In. dust ports

Includes casters for easy mobility around the shop

More efficient motor save up to 33% cost to operate

Quick release for easy cleaning

Single Phase

60 Hz., 3450 RPM, TEFC Motor

SPECIFICATIONS

RIKON

Stk no. 60-2500

Air Volume (CFM)

1470

Assembled Depth (in)

40

Assembled Weight (lbs)

310

Assembled Width (in)

30

Assembly Required

Partial

Automatic Shut-Off

No

Brand / Model Compatibility

Rikon

Country of Origin

China

CSA Certified

No

Decibel Rating (dB)

83.7

ETL Listed

Yes

globalTradeItemNumber (GTIN)

00814463015217

Height (in)

60

Horsepower (hp)

2.5

Material

Metal

Package Contents

Dust Containment System

Package Depth

40

Package Height

60

Package Weight

310

Recommended Safety Equipment

Safety Glasses

Stand Included

Yes

UL Listed

No

UPC

814463015217

Vacuum Attachable

No

Voltage

230

Details
Out of stock

Rikon Cyclone Dust Collector 60-1750 1.75 HP 900 CFM

$2,045.00

Rikon Cyclone Dust Collector 1.75 HP 900 CFM

The 1.75 horsepower cyclone dust collector has a newly designed impeller that reduces the stress on the motor while meeting or exceeding air flow compared to other cyclones in their class. This reduced stress allows the motor to operate cooler, more efficient and has up to 33% less cost to operate. This improves the longevity of the motor. Equipped with remote control start functions that operate on bluetooth RF band technology which increases range and ability to operate the unit from a different room. This unit has 900 CFM. Two four inch dust ports. Built in casters for mobility. Large plastic bag liners are used for the dust containment barrel.

FEATURES

1.75 HP - 900 CFM

2 - 4 In. dust ports

Includes casters for easy mobility around the shop

More efficient motor save up to 33% cost to operate

Quick release for easy cleaning

Single Phase

60 Hz., 3450 RPM, TEFC Motor

SPECIFICATIONS

Rikon stock number:

60-1750

Air Volume (CFM)

900

Assembled Depth (in)

40

Assembled Weight (lbs)

220

Assembled Width (in)

30

Assembly Required

Partial

Automatic Shut-Off

No

Brand / Model Compatibility

Rikon

Country of Origin

China

CSA Certified

No

Decibel Rating (dB)

81.6

ETL Listed

Yes

globalTradeItemNumber (GTIN)

00814463015200

Height (in)

60

Horsepower (hp)

1.75

Material

Metal

Package Contents

Dust Containment System

Package Depth

40

Package Height

60

Package Weight

220

Recommended Safety Equipment

Safety Glasses

Stand Included

Yes

UL Listed

No

UPC

814463015200

Vacuum Attachable

No

Voltage

115

Details
Out of stock

Rikon 1Hp Portable Dust Collector 60-105

$399.95

1 HP portable dust collector #60-105 is a great size and adaptable for many uses that a small shop encounters. Single 4 In. dust port draws 660 CFM, more than enough vacuum power for big chip makers, like jointer and planers. Built-in casters and handle make moving it about easy. Features an adjustable pipe extension with chip collecting funnel that can be positioned high for use with lathes, drill presses, workbenches etc. Includes 2 micron cloth filter bag, 108 In. long x 4 In. dust hose, adjustable pipe & funnel attachment system, safety on/off switch, and wall mounting brackets. 1 HP develops 660 CFM 4 In. dust port inlet for attaching to a single machine Includes casters for easy mobility around the shop Includes adjustable pipe & funnel system for dust collection use with lathes, drill presses, workbenches, etc. can be positioned up to 55 In. high.

Details