Shop

Makita 12V max CXT® 3-3/8″ Circular Saw Mfr # SH02Z Tool Only

$165.90

The Makita 12V max CXT® Lithium-Ion Cordless 3-3/8” Tile/Glass Saw (CC02Z, tool only) delivers smooth and powerful cutting, with a compact design that’s engineered for ease-of-use and maneuverability. With the 12V max CXT® Lithium-Ion slide-style batteries (sold separately), users get improved balance and ergonomics over pod-style batteries. For added convenience the batteries include an on-board L.E.D. charge level indicator.

The CC02Z is compact and weighs only 4.0 lbs. (with 12V max CXT® 2.0Ah battery, sold separately). With 1,600 RPM, 1 in. cutting capacity, and a large 16.9 oz. water supply tank for wet cutting applications, it is a compact and efficient cutting solution for tile and glass.

For longer run time, all 12V max CXT® cordless tools are also compatible with the 12V max CXT® Lithium-Ion 4.0Ah battery (BL1041B, sold separately). 12V max CXT® lithium-Ion batteries are engineered with a Battery Protection Circuit that protects against overloading, over-discharging and over-heating. It’s part of the expanding 12V max CXT® series, combining performance with superior ergonomics in a compact size.

Add to cart Details
Makita CC02Z. 12V max CXT® 3-3/8″ Tile/Glass Saw

$165.90

The Makita 12V max CXT® Lithium-Ion Cordless 3-3/8” Tile/Glass Saw (CC02Z, tool only) delivers smooth and powerful cutting, with a compact design that’s engineered for ease-of-use and maneuverability. With the 12V max CXT® Lithium-Ion slide-style batteries (sold separately), users get improved balance and ergonomics over pod-style batteries. For added convenience the batteries include an on-board L.E.D. charge level indicator.

The CC02Z is compact and weighs only 4.0 lbs. (with 12V max CXT® 2.0Ah battery, sold separately). With 1,600 RPM, 1 in. cutting capacity, and a large 16.9 oz. water supply tank for wet cutting applications, it is a compact and efficient cutting solution for tile and glass.

For longer run time, all 12V max CXT® cordless tools are also compatible with the 12V max CXT® Lithium-Ion 4.0Ah battery (BL1041B, sold separately). 12V max CXT® lithium-Ion batteries are engineered with a Battery Protection Circuit that protects against overloading, over-discharging and over-heating. It’s part of the expanding 12V max CXT® series, combining performance with superior ergonomics in a compact size.

Add to cart Details
Fein 71293861090 Ampshare Multimaster 500 Top Kit 4Ah 18V w/ Case

$399.99
- Anti-vibration system: Permanently safe, pleasant working conditions with minimum vibrations and outstanding noise damping.
- StarlockPlus tool mounting: Work faster and with higher precision thanks to 100% no-loss power transmission.
- QuickIN: Tool change in under 3 seconds with a patented, tool-free, FEIN rapid-clamping system.
- With the StarlockPlus tool mounting, you have access to around 100 FEIN accessories in the Starlock and StarlockPlus performance categories.
- DC motor: Effective, high-torque motor technology for output that is virtually identical to that of the model with a cord.
- Tacho generator: Constant speeds, even under load, and infinitely variable electronic speed control.
- Metal drive head: High load capacity and maximum service life, since all drive head parts are made of metal.
- Mechanical interface: For stationary use in the table or drill jig holders, or to attach depth stops.
- Electronic cell protection (ECP): ECP protects storage batteries against overloading, overheating and deep discharge.
- COOLPACK technology ensures a longer storage battery service life, enabling longer operation times.
- The battery capacity can be read directly on the battery.
- Compatible with AMPShare/Bosch Professional 18 V batteries from 2008 on.
Add to cart Details
MAKITA GHU02M1 40V max XGT® Brushless Cordless 24″ Hedge Trimmer Kit (4.0Ah)

$615.99
With zero emissions and lower noise, the 40V max XGT® Brushless Cordless 24” Hedge Trimmer (GHU02Z, tool only) is a welcome solution for professional landscaping clean-up applications. The Makita-built brushless motor delivers up to 5,000 SPM for powerful trimming. It has three speed options to manage power and run time.

The 24” dual-action double-sided shear blade provides optimal performance. A reverse function clears jams. The hedge trimmer can get up to 6 hours of run time using one (1) 40V max XGT 4.0Ah Battery. The 5-position rotating rear handle provides increased comfort during vertical and angle trimming. A tip guard protects the end of the cutter bar against hard surfaces.

For added durability in harsh job site conditions, Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance. The power head also features IPX4-rated weather-resistant construction for added durability.

XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

OUTPOWER: Makita-built brushless motor delivers power of a 22.7cc gas hedge trimmer

OUTSMART: Up to 16% more torque than gas for cutting thick branches

OUTLAST: Up to 6 hours of run time using a 40V max XGT® 4.0Ah battery

24" dual action double-sided shear blade with 3-sided teeth for clean cuts

5-position rotating rear handle for increased comfort during vertical and angle trimming

Reverse function for clearing jams

Anti-vibration design for operator comfort

Tip guard protects the end of the cutter bar against hard surfaces

IPX4 weather-resistant construction for durability and long life

Extreme Protection Technology (XPT™) engineered for improved dust and water resistance
Add to cart Details
MAKITA GHU02Z 40V max XGT® Brushless Cordless 24″ Hedge Trimmer, Tool Only

$225.99
With zero emissions and lower noise, the 40V max XGT® Brushless Cordless 24” Hedge Trimmer (GHU02Z, tool only) is a welcome solution for professional landscaping clean-up applications. The Makita-built brushless motor delivers up to 5,000 SPM for powerful trimming. It has three speed options to manage power and run time.

The 24” dual-action double-sided shear blade provides optimal performance. A reverse function clears jams. The hedge trimmer can get up to 6 hours of run time using one (1) 40V max XGT 4.0Ah Battery. The 5-position rotating rear handle provides increased comfort during vertical and angle trimming. A tip guard protects the end of the cutter bar against hard surfaces.

For added durability in harsh job site conditions, Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance. The power head also features IPX4-rated weather-resistant construction for added durability.

XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

OUTPOWER: Makita-built brushless motor delivers power of a 22.7cc gas hedge trimmer

OUTSMART: Up to 16% more torque than gas for cutting thick branches

OUTLAST: Up to 6 hours of run time using a 40V max XGT® 4.0Ah battery (battery sold separately)

24" dual action double-sided shear blade with 3-sided teeth for clean cuts

5-position rotating rear handle for increased comfort during vertical and angle trimming

Reverse function for clearing jams

Anti-vibration design for operator comfort

Tip guard protects the end of the cutter bar against hard surfaces

IPX4 weather-resistant construction for durability and long life

Extreme Protection Technology (XPT™) engineered for improved dust and water resistance
Add to cart Details
Makita B-02870 12‑1/4″ Planer Blade, Double Edged High Speed Steel, 2/pk

$68.90

Makita Planer Blades are designed for fast and smooth planing. The blades are made from fine grade high speed steel for added durability and long life. The blades install easily in the Makita 12-1/4" Planer model KP312.

Add to cart Details
Makita KP312 12‑1/4″ Planer

$2,679.00
- The Makita 12-1/4-Inch Planer, (model KP312), is precision engineered for a even cutting, job after job. It is ideal for professional timber framers, carpenters, log home manufacturers, boat fabricators, and more.
  
  15 AMP Power
  
  The KP312 features a 15 AMP motor that delivers 12,000 RPM for the most demanding jobs. The KP312 can plane up to 12-1/4 inches wide and 1/8 inch deep in a single pass. The non-slip long life poly “V” belt is designed to efficiently transfer power to the double-edged high-speed steel blades for consistent results. The front roller is engineered for easy moving of the planer over rough materials, and the large ejection chute provides a high rate of discharge and helps prevent clogging from wet or dry wood chips. The spring-loaded stand elevates the base to protect the blades and workpiece, and the ball bearing construction is engineered for longer tool life.
  
  Ease-of-Use Features
  
  The KP312 has several ease-of-use features, including a large, conveniently located depth setting knob for easy adjustment, and a guide rule for accurate and maximum use of planning width. The 33-foot cord is located at the top of the handle to help prevent obstruction during long and repeated passes. The rubberized front handle is designed for comfort, control, and reduced operator fatigue.
  
  Engineered for Framing and Woodworking
  
  The KP312 is engineered for professional timber framers, carpenters, log home manufacturers, boat fabricators and general contractors seeking a best-in-class 12-1/4-inch Planer.
Add to cart Details
Makita LS1219LX 12″ Dual-Bevel Sliding Compound Miter Saw with Laser and Stand

$1,295.90
The Makita 12” Dual-Bevel Sliding Compound Miter Saw with Laser and Stand (model LS1219LX) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (6-3/4”) and crown molding (8” nested). It will also make 15” crosscuts at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0° to 48° (left and right).

The saw is powered by a 15 AMP direct drive motor with soft start, a key point of difference. Direct drive enables smoother start-ups and consistent, constant power with no belts to slip or replace. The electric brake provides added convenience. In addition, the electronic speed control maintains constant speed under load for smoother, higher-quality cutting.

Additional features include a high-quality 60T carbide-tipped blade, and a see-through blade guard system for greater visibility of the blade and line-of-cut. The built-in laser indicates the line-of-cut whether the blade is turning or not, and offers micro-adjustments for precise “left-of-blade” or “right-of-blade” cutting. It has dual dust collection ports for improved dust collection capability for use with a bag (included) or vacuum (sold separately). It also has a large-sized aluminum base that improves the stability of cutting stock for more efficient cutting.

Model LS1219LX is a kit and includes a 33.7 lb. compact folding stand with transport wheels and a side handle for easier job site portability.
- Unique 2-Steel Rail Sliding System design offers single slide-glide operation
- Increased capacity for up to 8" crown molding (vertically nested), 6-3/4" baseboard (vertical), and 15" crosscuts at 90°
- Includes a durable compact folding stand with transport wheels and a side handle for easier job site portability; features an aluminum tubular design weighing only 33.7 lbs.
- In-front bevel lock for convenient operation
- Dual dust collection ports provide excellent dust extraction performance
- Material support extensions of the stand extend 100-1/2"; supported up to 500 lbs. for increased cutting efficiency
- Innovative direct drive motor and guard system is engineered for increased vertical cutting capacity (6-3/4")
- Linear ball bearing system engineered to deliver "dead-on" accurate cuts
- Less weight (65 lbs.) and the most compact design in its class for easy jobsite portability
- Powerful 15.0 AMP direct drive motor requires less maintenance and delivers 3,200 RPM
- Large-sized aluminum base improves stability of material for efficient cutting
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- Miters 0-60° left and right; bevels 0-48° left and right
- Positive miter stops at: 0°, 15°, 22.5°, 31.6°, 45°, and 60° left or right
- Electronic speed control maintains constant speed under load for smoother, higher quality cutting
- Integrated upper and lower 5-1/2" tall fence system offers added rigidity for more precise miter and bevel cuts
- Built-in laser clearly indicates line-of-cut whether blade is turning or not; on-off switch and micro-adjustments for precise "left-of-blade" or "right-of-blade" cutting
- Ergonomic rubberized horizontal D-handle design for better fit and added comfort
- Replaceable stainless steel miter scale features large and easy-to-read markings
- Easy-to-read dual bevel scale for more precise adjustments
- See-through blade guard system for greater visibility of blade and line of cut
- Easy blade changes for increased efficiency
- Oversized trigger switch for better fit, added comfort and easier operation
- Easy one-touch slide lock for convenience
- Simple 90º turn-of-the-knob miter angle lock/unlock mechanism
Add to cart Details
Kreg DK1100TP Benchtop Single-Spindle Pneumatic Pocket-Hole Machine

$4,499.00

The DK1100 series of machines are the standard in the industry for drilling a single pocket hole at a time. We’ve packed a ton of functional features into these machines that set them apart from the competition. Choose from electric- or pneumatic-powered, freestanding or bench-mounted to fit the way you build. Each DK1100 machine is built with industrial-grade motors that provide the power to run day after day – quickly, quietly, and reliably – in even the most high-production environments. For most shops, this translates into previously unheard of productivity and efficiency.This model is identical to the DK1100 FP, but comes in a much smaller frame. It features a table height of 8", making it easy to build into your workbench or relocate from time to time. Requires a compressor able to produce 8 CFM at 120 PSI (50% duty cycle). Convenient Swing Stops Quickly position two pocket holes across rails of various widths by placing it against one stop, drilling the hole, and then repeating with the rail against the other stop. For drilling pocket holes in panels, the stops simply swing out of the way. Adjustable Fence Adjustments couldn’t be easier, as the fence adjusts directly from the top side of the machine to let you center a screw in 1/2"- to 1 1/2"-thick material. The clamp hold-down also adjusts to allow materials up to 4"-thick to be drilled. Quick Drill Bit Changes Changing drill bits is a quick and easy process. Simply loosen the collet with the provided Allen wrench, replace with a new bit, and you are back in production in less than 60 seconds. Long-Lasting Motors The industrial-grade motors used in Kreg machines are built for long-lasting service. Kreg machines are designed to minimize stress on moving parts, greatly reducing the likelihood of failure.

Add to cart Details
Kreg DK3100 Multi-Spindle Pocket-Hole Machine

$5,999.00

If you’re looking for the ultimate machine to build face-fames, this is it. The DK3100 contains three spindles that allow you to drill two pocket holes across rails of varying widths in just one machine cycle. Best of all, the DK3100 can also be quickly changed to drill a single pocket hole, like our DK1100 series, by simply removing a drill bit. If you’re serious about face-frame production, the DK3100 is the machine that will deliver real performance to your shop and profits to your bottom line. The DK3100 not only drills two pocket holes in one cycle, it also gives you options for spacing the holes. You can set the drill spindles at 3/4", 1", and 13/4" on center, perfect for today’s most common rail widths. Pocket Holes, Twice as Fast! Multiple spindles give you the option of three different hole spacings to fit today’s most common face-frame widths. If you would prefer to drill only one pocket hole, just remove a drill bit and you get the equivalent of our DK1100 single-spindle machine. Only Kreg offers you the option of one or two pocket holes at a time and your choice of three different on-center hole spacings in the same machine. Easy Setup The lift-off top gives you direct access to the drill bits. A simple turn of an Allen wrench in the drill bit collets is all it takes to change bits. In less than a minute, you can change to any of the three settings or set up the DK3100 for single-spindle drilling. One-Second Cycle Times Two pocket holes in one second? It’s possible with the DK3100. The one-touch foot pedal fires the spindle to make two perfect pocket holes in just one second. Durability The DK3100 uses a hardened-steel drill guide that supports the drill bits all the way into the workpiece, prolonging drill bit life and improving the cut quality of the pocket hole.

Add to cart Details
Kreg DK1100FP Single Spindle Pneumatic Floor Pocket Hole Machine

$4,999.00

Kreg Single Spindle Pneumatic Floor Pocket Hole Machine

The DK1100 series of machines are the standard in the industry for drilling a single pocket hole at a time. We’ve packed a ton of functional features into these machines that really set them apart from the competition. Choose from electric- or pneumatic-powered, freestanding or bench-mounted to fit the way you build. Each DK1100 machine is built with true industrial-grade motors that provide the power to run day after day – quickly and reliably – in even the most high-production environments. For most shops, this translates into previously unheard of productivity and efficiency. Already set up for pneumatic? This model features an industrial grade 11/4-HP pneumatic motor capable of the same pocket hole productivity as the electric version. Requires a compressor able to produce 8 CFM at 120 PSI (50% duty cycle).

California Proposition 65 Warning.

FEATURES

Hardened-steel drill guide maximizes drill bit life

Industrial-grade motor for long-lasting service

One-touch, pneumatic operation by foot pedal

Swing Stops for optimized material positioning

Dust collection chute for efficient chip removal

Adjustable Fence

Quick Drill Bit Changes

Add to cart Details
Walnut Lumber – 2″ Thick x 12″ Wide x 36″ S4S

$189.95

These custom-sized walnut slabs are planed and edged to 2 inches thick (8/4). Available leghts are 2, 3, or 4-foot lengths.

All slabs are kiln dried, milled to 2" and surfaced on all remaining sides. Each slab is sanded with 3m 80 grit Cubitron.

Your slab will be sent unfinished.

Photo is representative of what your slab may look like once a top coat is applied.

Please note, no two grain patterns are alike.

Add to cart Details

FEATURES