-
-
Delta’s 36-L552 left tilt cabinet saw is ideal for woodworking, cabinet making, and boat building. It features up-front dual-crank controls with locking cams, speedometer style scales and a 52 inch Biesemeyer fence. The 5HP 220V motor cuts hardwoods and engineered products like MDF and melamine. The riving knife enables tool-less adjustment for through- and non-through cuts including grooves for shelves and picture frames as well as dadoes, rabbets, and cheek cuts for furniture. The single-cast trunion provides increased vibration control. Largest throat plate in category eases blade changes. Storage under the table board is convenient and expandable. Bi-level dust extraction improves dust collection. The 36-L500 is one of several pieces that make the 36-L552. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]- Single-cast trunnion system results in incredible vibration control providing continuous smooth operation and dependable accuracy
- Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
- The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4 degree
- The Cabinet Construction consists of a large cast-iron base providing stability and solid footing; True american marathon motor provides added power and is available in both 3 and 5 hp
-
This Extreme Table Saw is ideally suited to handling large panels without blinking an eye. A right-hand and rear-mounted extension table supports the widest panels before, during, and after the cut, and the large rail-mounted switch control won't get lost under the panel. Other features include ample storage shelves, a user friendly blade guard, a riving knife, a digital readout for blade angle and an efficient dust management system that includes an internal dust port and sloped cabinet floor that directs saw dust into the 4" dust port. Enjoy all of the innovative features this big capacity saw has to offer. CSA certified meeting CSA C22.2 #71.2-08, CSA C22.2 #105-1953, and UL 987 standards. Made in an ISO 9001 Factory. SPECIFICATIONS:- Motor: 7-1/2 HP, 220V/440V*, 3-phase
- Amps 19.5/10
- Blade tilt: Left, 45 degrees
- Table height from floor: 35-3/4"
- Table size with extension 69-1/2" x 78-3/4"
- Arbor speed: 3600 RPM
- Arbor size: 1"
- Maximum dado width: 3/4"
- Maximum depth of cut @ 90°: 4"
- Maximum depth cut @ 45°: 2-3/4"
- Maximum rip capacity: 52"
- Distance from front of table to blade at maximum blade height: 11-1/2"
- Distance from front of table to center of blade: 17-1/4"
- Overall dimensions: 91-1/2" W x 79-1/2" D x 42-1/2" H
- Approximate shipping weight: 861 lbs.FEATURES:
- Precision-ground cast iron table
- Cast iron trunnions
- 3/8" x 3/4" T-slots & miter gauge
- 4" dust port
- Smooth and quiet Poly-V serpentine belt power transfer
- Steel cabinet
- Hinged motor cover
- Right hand and rear extension tables
- Magnetic switch with thermal overload protection and lock-out padlock
- Digital readout for bevel angle
- Quick-change between riving knife and splitter guard
- Includes 12" x 60T blade and push stick*If you require 440 volt operation, Grizzly must convert your machine at the time of purchase to maintain the machine's warranty. A $250 fee will be added to your order. Please allow extra shipping time for the conversion. If you need more information please contact technical service
-
Introducing: The Last Dust Collector You'll Ever Need - Now With Twice The Airflow!
2019 Edition - New features for improved efficiency and ease of use! Choosing the best dust collector for your shop can be difficult, especially when you start combining mixed/undersized dust port and long runs of ducting or hoses. Oneida Air Systems' patented SMART Boost® technology offers the only solution that can adapt to nearly any shop layout! Our unique SMART Boost monitors your system for any suction loss and automatically adjust the fan motor's speed to compensate - delivering maximum air volume for a wide range of tools and delivering higher suction at the cutter head where you need it the most! The Dust Gorilla Pro Combines the award-winning features of our Super Dust Gorilla with the rugged construction of our Pro series, this new system will help you maximize your investment and ensure that your shop is running at peak-efficiency for years to come.Included Features & Components
- Industrial 5HP U.S. Made Fan Blower Motor
- SMART Boost Variable Speed Airflow Controller
- Wireless Radio Frequency Remote Control Keyfob
- Single-Piece, Smooth-Wall, Molded Fan Housing
- Heavy-Gauge Steel Cyclone Separator
- 3rd Party Tested Premium HEPA Cartridge Filter
- Stacking Sound Filter & Drop-in Silencer
- Steel Angle Frame Stand
- 35 Gallon Reinforced Steel Dust Bin
- Dust Sentry™ Bin Fill Level Indicator
- D.I.Y. Ductwork Design Guide
- 2 Year Limited Warranty
-
Heavy-gauge steel cyclone body, fully seam-welded with iconic yellow powder coat finish. SMART Boost technology doubles the airflow through smaller ports and long ducting runs - ideal for CNC machines! Includes 35 gallon bin, stand, and RF remote control. -
Perfect for cutting wide panels in limited shop space, this 10" Sliding Table Saw features a scoring blade to eliminate cross grain tear-out, a 63" long crosscut capacity, telescoping crosscut fence with two rock-solid flip stops, fully-adjustable miter fence with its own flip stop, two-position extruded-aluminum rip fence, riving knife, and large blade guard with integral dust port. This 10" Sliding Table Saw makes quick work of all standard plywood panels. Accepts 10" saw blades with 5/8" arbor bores or dado blades up to 13/16" wide. Certified to CSA standards! -
-
Out of stock
• Powerful 3 HP Motor • 4 Row Helical Head Design • Precision Cast Iron Tables • Heavy Duty Design • Rubber Outfeed Rollers • Dual Planer / Jointer Combination
12” Planer / Jointer #25-210H are equipped with a larger 12” cutter head and powerful 3HP motors that make quick work in milling the hardest, or widest rough-sawn lumber. A favorite of production shops, the jointer andplaner tables are made of heavy, cast iron and machined smooth for efficient movement through the cutters. Unique, one-piece jointer tables easily lift up and out of the way for planer use, or to work on the cutter head. The #25-210H has a 4-row, helical cutter head with 56 four-sided, carbide insert cutters. 220V motors require 3-wire electrical plugs to match your electrical receptacles. -
Out of stock
Sign Shops cut a variety of material, not just wood, materials such as aluminum composites, corrugated plastics, foam board, PVC material, wood and much more. For some time, sign shops had to use different machines to cut each material. Thankfully, those days are gone, with the help of our Sign Maker’s Series. FS76SM model features a 120" wide frame and a 76" vertical cut. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]- Full Size 120" Wide Frame
- Makita 5007F 7.25" saw
- Spinning saw insert plate
- Spring Hold Down
- Pivoting Knife Cutter
- Dust hood, hose, brush
- Folding Stand and Wheels
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
Out of stock
4/2020 Latest version -
With its built-in locking mobile base and pedestal-mounted switch, our Model W1754S spiral cutterhead planer is easy to move and operate. Just press down on the lock lever with your foot and this planer is mobile. Standard features include a 55-5/8" long precision-ground cast-iron table with the cast-iron extension wings, two feed speeds, return rollers, a 20" x 8" capacity, adjustable bed rollers, magnetic switch with thermal overload protection, and a 5 HP motor. Certified to CSA and UL standards. -
Sale!
Out of stock
The G0701 19" Ultimate Bandsaw is made for production work with its large cutting capacities, foot brake, resaw fence and motorized upper blade guide. The 5 HP motor powers through wood at a maximum 19-1/2" cutting capacity and the 18-3/8" throat is big enough for most applications. No more cumbersome two-handed height positioning! Simply toggle the switch up or down for motorized blade guide adjustments. The G0701 has an extra-wide 28" x 24" cast-iron table that can tilt from 5° left to 45° right. The cast-iron fence includes an extruded-aluminum resaw fence that attaches quickly and supports tall stock exceptionally well. The cast-iron table trunnions add additional weight for greater stability. You'll also appreciate the computer balanced cast-iron wheels with rubber tires for the smoothest operation possible, blade tension gauge and rack and pinion table tilt adjustment. Made in an ISO 9001 factory CSA certifiedSPECIFICATIONS:
- Motor: 5 HP, 230V, single-phase, 22A
- Guide post motor: Universal DC, 40W
- Cutting capacity/throat: 18-3/8"
- Maximum cutting height: 19-1/2"
- Table size: 28" x 24"
- Table tilt: 5° left, 45° right
- Floor to table height: 35-1/4"
- Blade size: 166–168" long
- Blade width range: 3/8 – 1-3/8"
- Blade speed: 4975 FPM
- Footprint: 31" x 23-1/2"
- Overall size: 86-1/2" H x 36-5/8" W x 33" D
- Approximate shipping weight: 810 lbs.
-
Sale!
Out of stock
- Motor: 5 HP
- Tablesaw type: Sliding
- Blade size: 10 in.
- Maximum cutting height @ 90deg: 3-1/8 in.
- Maximum cutting height @ 45deg: 2-1/4 in.
- Maximum ripping capacity - right: 33 in.
- Table type: Precision-Ground Cast Iron
- Overall table size: 47 in. x 40 in.
- Shipping weight: 688 lbs
-
Sale!
Out of stock
This machine is outfitted with stops and clamps, so you can quickly insert pre-cut boards, clamp them in place, and start cutting. With the ability to cut two joints at a time, these dovetail machines can produce a 4-sided drawer in under two minutes if the boards are prepared properly. Includes a 4-sided template for cutting 1", 1-1/2", 2", and 2-1/2" dovetails. Also spindle heads are micro-adjustable to give you complete control of dovetail "fit." -
Kreg Single Spindle Pneumatic Floor Pocket Hole Machine
The DK1100 series of machines are the standard in the industry for drilling a single pocket hole at a time. We’ve packed a ton of functional features into these machines that really set them apart from the competition. Choose from electric- or pneumatic-powered, freestanding or bench-mounted to fit the way you build. Each DK1100 machine is built with true industrial-grade motors that provide the power to run day after day – quickly and reliably – in even the most high-production environments. For most shops, this translates into previously unheard of productivity and efficiency. Already set up for pneumatic? This model features an industrial grade 11/4-HP pneumatic motor capable of the same pocket hole productivity as the electric version. Requires a compressor able to produce 8 CFM at 120 PSI (50% duty cycle).
FEATURES
Hardened-steel drill guide maximizes drill bit lifeIndustrial-grade motor for long-lasting serviceOne-touch, pneumatic operation by foot pedalSwing Stops for optimized material positioningDust collection chute for efficient chip removalAdjustable FenceQuick Drill Bit Changes -
The Saw Trax Full Size 2000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 2052 features a 52″ vertical cut.This series includes an accessory package recommended for most production companies. This 2000 series features and is ideal for customers cutting a large volume of sheet goods up to 1 3/4 inches thick. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]- Full Size 120" Wide Frame
- Makita 7.25" saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Steel covered material rollers
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
Out of stock
Designed for efficient switchovers between functions, this 12”-wide jointer/planer saves time, space, and money. With its cast iron table and steel base, the machine will last for many years.- 3 hp motor spins the head at 6,600 rpm to make quick work of any material.
- Includes a 2.75” helical cutter head with rotatable carbide blades.
- This type of head stays sharp for much longer and cuts more quietly than a straight-knife cutter.
- Runs on 220-volt single-phase power, so this jointer/planer combination machine will work almost anywhere.
- You can make fast changeovers between jointing and planning functions, since you don’t have to remove the fence.
- Machined cast iron table supports the material so it stays true for cutting.
- Extra-large rack and pinion aluminum fence can adjust to any angle between 45° and 90°.
- Large handwheel allows you to raise the planer table quickly and precisely.
- Rigid, fully-closed steel stand reduces vibrations to give you clean, accurate results over a long lifetime of use.
- Dust ports can hook up to your dust collection system to keep your shop clean and make the air safely breathable.
- Covered by a 1-year parts warranty.
- Replacement parts are in stock for fast shipping.
- We include lifetime technical support by phone. Call up our team of experienced woodworkers when you have project questions or problems.
-
Out of stock
Get all of the benefits of a sliding table saw in a size that actually fits in your shop. large panels are fully supported by the sliding table making ripping and cross-cutting almost effortless. the scoring blade eliminates tear-out for factory fresh edges every time and dust control is handled by the 4-Inch main port and 2-1/2-Inch port on the blade guard. easy to set up and operate this 10-Inch sliding table saw belongs in every production shop. specifications: · motor: 7-1/2 hip 220v/440v* three-phase · main blade size: 10-Inch · main blade arbor: 5/8-Inch · main blade tilt: 0-45° · main blade arbor speed: 4000 rpm · depth of cut at 90°: 3-1/8-Inch · depth of cut at 45°: 2-1/4-Inch · scoring blade size: 3-1/8-Inch (80mm) · scoring blade arbor: 22mm · scoring blade tilt: 0-45° · sliding table size: 12-1/4-Inch x 63-Inch · maximum dado width: 13/16-Inch · maximum capacity w/rip fence: 33-Inch · cutting width w/cross-cut fence: 78-1/2-Inch · cutting length w/cross-cut fence: 63-Inch · main table dimensions: 14-3/8-Inch x 27-Inch · approximate shipping weight: 688 lbs -
The Saw Trax Full Size 1000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 1088 features a 88″ vertical cut. This series includes an accessory package recommended for most general wood workers. This 1000 series are ideal for customers that need a vertical panel saw to perform precision cuts in sheet goods that are less than 1 ¾ inches thick. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]- Full Size 120" Wide Frame
- Makita 5007F 7.25" saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
The Saw Trax Full Size 2000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 2064 features a 64″ vertical cut.This series includes an accessory package recommended for most production companies. This 2000 series features and is ideal for customers cutting a large volume of sheet goods up to 1 3/4 inches thick. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
- Full Size 120" Wide Frame
- Makita 7.25" saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Steel covered material rollers
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
The Saw Trax Full Size 2000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 2076 features a 76″ vertical cut.This series includes an accessory package recommended for most production companies. This 2000 series features and is ideal for customers cutting a large volume of sheet goods up to 1 3/4 inches thick. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
- Full Size 120" Wide Frame
- Makita 7.25" saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Steel covered material rollers
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
Out of stock
-
The Saw Trax Full Size 1000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 10100 features a 100″ vertical cut. This series includes an accessory package recommended for most general wood workers. This 1000 series are ideal for customers that need a vertical panel saw to perform precision cuts in sheet goods that are less than 1 ¾ inches thick. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]- Full Size 120" Wide Frame
- Makita 5007F 7.25" saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
Out of stock
The Saw Trax Full Size 10100 panel saw is just one of the models within the 1000 series product line that are built for the Woodworker in mind. The 10100 has a vertical cut height of 100 inches giving you the extra room needed for out of square material to still fit. Additional size machines are available with up to a 100 inch vertical cut. All Saw Trax brand full size 1000 series panel saws feature a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 1000 series saws are ideal for customers that need a vertical panel saw to perform precision cuts in sheet goods that are less than 1 ¾ inches thick. Standard features for the Saw Trax 1000 series vertical panel saws include a Makita 5007F circular saw on a spinning saw insert to quickly switch from vertical to horizontal cutting, real steel bearings on the carriage, a patented alignment system that never goes out of square, a dust collection system that actually collects the saw dust, and a “quick change” carriage that allows you to use other cutting tools. The 1000 series also comes equipped with a pre-attached folding stand that is as easy to open and close as a ladder yet provides complete stability while in operation. For portability and mobility, transport wheels are included. Both the vertical and horizontal measuring systems on the 1000 series panel saw help to ensure accurate cuts using one vertical tape with rip pointers and two horizontal tapes with a stop and stop extension bar which provides the capability to make repetitive cuts easily. Manufactured in and ships from Atlanta Georgia. -
The Saw Trax Full Size 3000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. Features a 50" vertical cut. This series includes an accessory package recommended for customers cutting melamine, custom doors and other material up to 2 1/2 inches thick. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]- Full Size 120" Wide Frame
- Makita 10" circular saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Steel covered material rollers
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
Out of stock
Engineered for top performance, the SIMPSON pressure washer trailer 3800 PSI at 3. 5 GPM is a self contained cleaning machine. Designed to utilize the power and performance from top of the line SIMPSON pressure washers matched with the portability of a utility trailer, it lets you bring a cleaning solution into the field, where water supply is an issue. The 95001 is run by a Honda engine and comes with a 100’ hose, an ergonomic spray gun and 5 Quick-Connect nozzles. This powerful SIMPSON mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine and begin cleaning. Warranty Details: Engine - 3 Year Limited Commercial Warranty | Pump - 5 Year Limited Warranty | Frame - 1 Year Limited Warranty -
The helical cutterhead delivers near mirror-smooth finishes right out of the gate. It consists of four rows of 92 indexable carbide inserts, each angled slightly to produce a shearing action. This shearing action results in less tearout in highly figured woods and quieter operation—and the planed surfaces are far superior to what you'll get with straight-knife or other 20" spiral cutterheads on the market. Other high-end features include a digital table height scale for ultra-precise and consistent thickness adjustments, precision-ground cast-iron tables, and triple belt drive—everything that makes this planer truly live up to the South Bend name. FEATURES:- Digital table height scale
- Variable feed speed dial on control pedestal
- Extra-large ball bearing return rollers
- Heavy-duty precision-ground cast-iron extension wings
- Pedestal-mounted controls with magnetic switch and thermal overload protection
- Internally mounted motor
- Four heavy-duty support columns
- Anti-kickback fingers
- Drive gears run in oil bath
- Triple belt drive inside housing
- US based customer service and technical support
-
The Saw Trax Full Size 3000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. Features a 62" vertical cut. This series includes an accessory package recommended for customers cutting melamine, custom doors and other material up to 2 1/2 inches thick. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
- Full Size 120" Wide Frame
- Makita 10" circular saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Steel covered material rollers
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
Out of stock
Get ready for something radically different. The UNISAW, has been redesigned from the ground up and loaded with industry firsts. Like a conveniently located push-button arbor lock for quick, easy blade changes. Or a tool-free, split-design guarding system with a true rise and fall riving knife for through and non-through cuts. There's even a BIESEMEYER Fence accurate to 1/64 in. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]- Single-Cast Trunnion System results in incredible vibration control providing continuous smooth operation and dependable accuracy
- Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
- The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4°
- Tool-Free Split Guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools
- The Cabinet Construction consists of a large cast iron base providing stability and solid footing
- Table Top provides more surface area to stabilize the product and offers outstanding smoothness and superior ease
- The Largest Blade Opening in class makes fine tuning your riving knife and blade changes easier than ever
- The Push Button Arbor Lock makes the blade changing process simple and more natural with the use of only 1 wrench
- Large, Easy to Access ON/OFF switch is multi-directional and can be activated from any angle
- Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge
- provides a sealed interior. This combination results in much higher level of dust collection
- BIESEMEYER® Fence System provides hairline pointer and built-in tape allowing you to make precision set-ups, cut after cut. 9-ply fence faces
- have improved tolerances like no other as well as an improved cam front lock lever for an over lock with a curved edge
- On-Board Miter Gauge Storage is conveniently located on the side of the cabinet and On-Board Wrench and Push Stick Storage is conveniently located beside the switch
-
Out of stock
This 20”-widehelical head thickness planer can quickly turn rough lumber into boards with smooth faces. Heavy cast iron and steel constructionkeeps the material steady and supported.- 5 hp motor turns the cutter head at a whopping 5,000 rpm.
- Straight 4-row helical head cutter comes standard.
- Runs on 220-volt single-phase power, so it can work almost anywhere.
- Fully cast iron 20” x 25.75” table with 15” extensions can expand to an impressive 20” x 55.75”.
- 2 speedsallow you to pick what’s right for your project:
- 20 feet per minute when you need to smooth boards in shorter amount of time.
- 16 feet per minute when you want a more refined finish or you’re working with tougher material.
- 8” maximum and .25” minimum cutting height.
- Maximum ⅛” cut depth.
- Handwheel with a scale on the side of the planer lets you precisely adjust the height in seconds.
- Cast iron frame on the top and bottom stabilizes the machine and helps it last longer.
- Magnetic safety switch automatically turns the machine off in case of a power outage or a problem with the current.
- Anti-kickback fingers grip the material so it’s less likely to shoot back out if the blades get jammed.
- Extra-large 5” dust port prevents clogging. You can easily hook up your dust collection system, so your shop stays clean with breathable air.
- Built-in wheels on the base allow you to move the machine around your shop and store it.
- Covered by a 1-year parts warranty.
- Replacement parts are in stock at our Wisconsin warehouse for fast shipping.
- Lifetime technical support by phone means that you can call our team of experienced woodworkers whenever you have questions or need troubleshooting.
-
Out of stock
The Sign Package includes;- the Makita 5007F saw with 2 L.E.D. lights that illuminate the line of cut,
- a spinning insert for fast changes from vertical to horizontal cutting,
- a dust collection system that uses a dust brush and an over-sized 2.5″ hose to evacuate the dust,
- a pivoting OLFA razor knife that uses segmented snap off blades for fast sharpening,
- a variable tension spring hold down for holding thin materials,
- a material stop for fast cut set ups,
- a strip bar for cutting strips with the stop,
- left and right measuring tapes,
- vertical rip pointers with tape for fast rip cut set ups,
- a folding stand that is factory attached,
- frame wheels for easy movement of the saw
-
The Saw Trax Full Size 3000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. Features a 74" vertical cut. This series includes an accessory package recommended for customers cutting melamine, custom doors and other material up to 2 1/2 inches thick. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
- Full Size 120" Wide Frame
- Makita 10" circular saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Steel covered material rollers
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
Out of stock
This powerful SIMPSON mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine and begin cleaning. The SIMPSON mobile pressure washer 4200 PSI at 4. 0 GPM is a self-contained cleaning machine. Engineered to utilize the power and performance from top of the line SIMPSON pressure washers, it’s matched with the portability of a utility trailer. The 95002 is run by a Honda engine and comes with a 100’ hose, an ergonomic spray gun and 5 Quick-Connect nozzles. This mobile system brings a cleaning solution into the field where water supply is an issue. This powerful SIMPSON mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine and begin cleaning.Warranty Details: Engine - 3 Year Limited Commercial Warranty | Pump - 5 Year Limited Warranty | Frame - 1 Year Limited Warranty -
If you’re looking for the ultimate machine to build face-fames, this is it. The DK3100 contains three spindles that allow you to drill two pocket holes across rails of varying widths in just one machine cycle. Best of all, the DK3100 can also be quickly changed to drill a single pocket hole, like our DK1100 series, by simply removing a drill bit. If you’re serious about face-frame production, the DK3100 is the machine that will deliver real performance to your shop and profits to your bottom line. The DK3100 not only drills two pocket holes in one cycle, it also gives you options for spacing the holes. You can set the drill spindles at 3/4", 1", and 13/4" on center, perfect for today’s most common rail widths. Pocket Holes, Twice as Fast! Multiple spindles give you the option of three different hole spacings to fit today’s most common face-frame widths. If you would prefer to drill only one pocket hole, just remove a drill bit and you get the equivalent of our DK1100 single-spindle machine. Only Kreg offers you the option of one or two pocket holes at a time and your choice of three different on-center hole spacings in the same machine. Easy Setup The lift-off top gives you direct access to the drill bits. A simple turn of an Allen wrench in the drill bit collets is all it takes to change bits. In less than a minute, you can change to any of the three settings or set up the DK3100 for single-spindle drilling. One-Second Cycle Times Two pocket holes in one second? It’s possible with the DK3100. The one-touch foot pedal fires the spindle to make two perfect pocket holes in just one second. Durability The DK3100 uses a hardened-steel drill guide that supports the drill bits all the way into the workpiece, prolonging drill bit life and improving the cut quality of the pocket hole. -
Out of stock
The SIMPSON trailer pressure washer 3200 PSI at 2.8 GPM is a self-contained cleaning machine. Engineered to utilize the power and performance from top of the line SIMPSON pressure washers matched with the portability of a utility trailer. The 95000 is run by a Honda engine and comes with a 50’ hose, an ergonomic spray gun and 5 Quick-Connect nozzles. This mobile system brings a cleaning solution into the field where water supply is an issue. This powerful SIMPSON mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine and begin cleaning. Warranty Details: Engine - 3 Year Limited Commercial Warranty | Pump - 5 Year Limited Warranty | Frame - 1 Year Limited Warranty -
- PROGRAMABLE 10-INCH TABLE SAW: Digital and programmable auto-adjusting table saw with a 52-inch rip capacity makes your days work ripping down material quick and easy
- AUTOMATIC BLADE ANGLE ADJUSTMENT: Motorized blade angle adjustment allows you to adjust the angle of your cut quickly and easily through the digital keypad
- AUTOMATIC RIP FENCE ADJUSTMENT: Motorized rip fence allows you to adjust the dimension of your cut quickly and easily through the digital keypad
- DURABLE AND SMOOTH TABLE SURFACE: Heavy-duty, flat, polished cast iron table surface gives you seamless ripping performance as there is nothing for your material to get snagged on
- DUST-FREE MOTOR ENCLOSURE WITH FAN: Totally enclosed fan-cooled motor gives you long-lasting performance with no hiccups and no need to clean the motor of dust
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com