Shop

Oneida Supercell High-Pressure Dust Collector 6.75hp 14 Gal XSK414000

$3,399.99
From Oneida, the Supercell Turbo Charged, model XSK-414000, features everything you know and love regarding the original line of Supercell but features 30% more airflow. The Supercell Turbo is ideal for handheld and portable tools, especially small CNC routers. The adaptable design mounts easily to the wall and can be installed virtually anywhere in the shop, connecting to tools by up to an astounding 100' of 4" house or ductwork.

Features

10x higher suction pressure than standard dust collectors and 30% more airflow over the classic Supercell

Universal design collects from an 1" to 5" diameter port through up to 100' of hose and ductwork

14-gallon dust bin with automatic bag holder and fill level indicator

HEPA-grade media filter with internal pulse filter cleaner

Compact, wall-mounted design ideal for smaller shops with limited space

Combined 6.7HP, 230V High Pressure Fan Motors

Supports up to three 1" to 2.5" Dust Ports

Wireless radio frequency remote control Key Fob

Heavy-gauge steel cyclone pre-separator

Internal pulse filter cleaner system

Reinforced dust bin with viewing window

Automatic bag holder system

Dust Sentry bin fill level indicator

NFPA compliance ready

cETLus: certified to both U.S. and Canadian product safety standards by an NRTL

Conforms to UL-1017 and Can/CSA-C22.2 # 243 standards

Specifications

Horsepower: 6.7HP

Motor Type: 4x 1300W Modular Motors

Voltage: 208-230V

Recommended Breaker Size: 30A

Amperage: 22A, 60Hz

Phase: 1PH (single phase)

Power Cord: 10', bare wiring - includes 2 hot and 1 ground for direct wiring plug not included

CFM Rating: 536 CFM @ 2.3" WC, Free Fan CFM: 634 CFM

Maximum Suction: 97.8WC

HEPA certified, E12 Minimum Efficiency rating, Merv Rating - MERV 16+

Total Filtration Area: 40sq ft.

Waste Capacity: 14 gallon

Built with cold rolled steel and seam welded

Static Resistance Rating: Conductive (metal)

Inlet: 4" O.D.

Discharge Port: 5" O.D.

Overall Dimensions: 20" w x 23"d x 61" h allow additional 24" of clearance height for maintenance

Includes

Wall mount bracket for 16" standard stud spacing

5 replacement bags

4"x25' Vacuum-rated SD urethane flex-hose

Key Fob

Blast gate

Turn Key Clamp: 2 each

Fan Motor Assembly

Magnetic Starter

Remote Control

Cartridge filter

Pulse Filter Cleaner

Cyclone Separator

Dust Bin

Dust Sentry bin fill level indicator

Automatic bag holder system

Only use vacuum pressure rated flex-hose and duct with the Supercell Dust Collector

Due to systems high suction, standard hoses/pipe may collapse and cause damage to equipment or injury

Weight: 76lbs

Remote Control is packed in the starter
1 year warranty
Add to cart Details
Out of stock

XXVM003 Oneida 3HP V-3000 HEPA Dust Collector 35 Gal Freestand

$3,399.99
Quiet, Compact, and Powerful - Ideal for Small Personal Workshops!
2019 Edition - New features for improved efficiency and ease of use! This system is ideal for use in small 1-2 man shops operating tools such as lathes, planers, radial/miter saws, and more! The V-System's molded static dissipative resin construction speeds up and simplifies system assembly, maximizes airflow performance, and significantly reduces noise levels. Learn how the V-System helped Kawneer North America improve their production workflows. Read the case study.
Included Features & Components:
- Industrial 3HP 230V U.S. Made Motor (Only have 110V power?)
- Magnetic Starter w/ Overload Protector
- Wireless RF Remote Control Keyfob
- High-Efficiency Molded Cyclone Separator
- 3rd Party Tested HEPA Cartridge Filter
- Stacking Sound Filter & Drop-in Silencer
- Compact Steel Angle Frame Stand or Wall Mounting Bracket
- 35 or 55-Gallon Reinforced Steel Dust Bin
- Dust Sentry™ Bin Fill Level Indicator
- D.I.Y. Ductwork Design Guide
- 1 Year Limited Warranty
Details
Out of stock

Baileigh Industrial SHEET METAL FINGER BRAKE BB-4012F

$3,479.00
The BB-4012F Baileigh box and pan brake frees up your hands to position the material by letting you clamp the sheet metal with a convenient foot control.
- This Baileigh sheet metal brake bends up to 12 gauge mild steel across its full 40” length.
- Stop rod lets you make repeatable bends with ease for production runs.
- Hardened bending die ensures years of high-quality results.
- Simple blade gap adjustment helps you correctly bend various gauges of sheet metal.
- Spring-loaded cylinder assists in lifting the apron, especially helpful when you’re bending at full capacity.
- Foot-controlled clamp leaves your hands free to position the sheet metal before clamping in place.
- Comes standard with hardened fingers in an assortment of widths to create many sizes of tanks, pans, boxes, and more.
- Built from the best possible components with a full-welded heavy steel framework to minimize flex and deformation.
Details
Oneida Supercell Hi-Pressure Dust Collector 55Gal 6.75hp XSK455000

$3,495.00

Add to cart Details
Out of stock

Shop Fox M1113 – 18″ 1-1/2 HP 3-Phase Wood/Metal Bandsaw

$3,499.99
A VFD (Variable Frequency Drive) with digital readout provides infinitely variable blade speeds between 150 and 3000 FPM, making this saw great for cutting wood and metal alike! Just turn the speed control dial to set the perfect cutting speed for each type of material you're cutting. Besides providing the variable-speed control, the VFD also allows this machine to take full advantage of the high-torque/low-speed characteristics of a 3-phase motor?while only requiring a single-phase power supply. The vertical cutting configuration and massive cast-iron table also makes it easy to feed intricate, curved cuts. All in all, the strong versatility of this 18" Vertical Wood/Metal Bandsaw makes it an ideal choice when shop space is limited and the range of profect types is diverse! Specifications
- Motor: 1-1/2 HP, 220V, 3-phase
- Power supply requirement: 220V, single-phase, 15A
- Max. cutting height: 12"
- Throat capacity: 17-1/2"
- Blade length: 133"
- Blade size range: 1/8"?1-1/4"
- Blade speed: variable, 150-3000 FPM
- Table tilt: 45° right, 5°left
- Floor to table height: 37-1/4"
- Table size: 18" x 24"
- Left and right table tilting control
- Upper and lower blade guides
- Precision-ground cast-iron table
- Quick-release blade tension
- Steel guide blocks
- Two dust ports
- Wheel brush on lower wheel
- Frequency drive provides variable speed control
- Fully balanced cast-iron wheels with rubber tires
- Rack-and-pinion adjustment on upper blade guide support
- Blade tension scale with magnified cursor
- Twin drive belts
- Includes rip fence and miter gauge
- Rip fence comes with right and left reading indicators, T-slots for quick change attachments, dead lift quick release, ball bearing slide, solid lever lock
- Overall size: 40"W x 76"H x 31"D
- Approximate shipping weight: 327 lbs.
Details
Saw Trax C52SM Sign Makers Package Panel Saw

$3,523.55
Sign Shops cut a variety of material, not just wood, materials such as aluminum composites, corrugated plastics, foam board, PVC material, wood and much more. For some time, sign shops had to use different machines to cut each material. Thankfully, those days are gone, with the help of our Sign Maker’s Series. C52SM model features a 60" wide frame for size restricted shops and a 52" vertical cut. Also available in Full Size models. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
- Compact 60" Wide Frame
- Makita 5007F 7.25" saw
- Spinning saw insert plate
- Spring Hold Down
- Pivoting Knife Cutter
- Dust hood, hose, brush
- Folding Stand and Wheels
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
[/fusion_checklist]
Add to cart Details
SJO-66922K Sjöbergs Elite Workbench 2000 + SM04 Cabinet Combo

$3,550.00
The Sjobergs Elite line of workbenches represents the highest quality you can get in a professional workbench. Strong, sturdy, and handsomely crafted, the Sjobergs Elite 2000 Workbench is unmatched in quality.
- Massive vises with 740 mm/29" width & 145mm/5 3/4" capacity
- Double row of dog holes running from any vise location
- Includes 4 unbreakable round 1" steel bench dogs
- Holdfast can be located in work top or the front legs
- Optional accessories kit includes one 1” Holdfast, one Universal Anvil, and a set of Jaw Cushions
- Constructed of European beech and thoroughly treated with top-quality oil
- Left- or right-handed use
Add to cart Details
C4 PANEL SAW SAFETY SPEED PANEL SAW w/ Accessory Package & Folding Stand

$3,579.00
DESCRIPTION
The C4 model packs all of the features of the full-size saws into a portable 5′ frame. This panel saw can travel to work sites and fit into shops with limited floor space. The C4 is ideal for cutting 4’–8′ sheets of material. Standard Equipment
- 3 ¼ Hp, 15 amp industrial duty saw motor.
- Zinc plated 1 ¾” steel guide tubes.
- 4 Nylatron roller bearing systems.
- Adjustable vertical and horizontal rulers.
- Quick change from vertical to horizontal cutting.
- Thin material pressure guard.
- Injection-molded plastic material rollers.
- Spring loaded counter balance system.
- Integrated dust collection bonnet.
- Extended warranty.
- TUV certified to UL/CSA standards
- Wall mounted
- QUICK STOP™ Gauge 5 ft./2.44m
- Dust collection kit (vacuum additional)
- Fixed stand/folding stand with C-Series
- Set of wheels
- 860ATB Foam Core Saw Blade
- Folding stand
Includes Lift gate
Add to cart Details
Oneida Supercell Hi-Pressure Dust Collector 30-Gal 6.75hp Model XSK430000

$3,595.00

Add to cart Details
Out of stock

Shop Fox M1111 6-Inch by 21-Inch Mill and Drill

$3,699.99

This M1111 Milling Machine has all of the important features of the M1110, but with a few extra time-saving luxuries. However, this mill is further fortified with a quick-tilt headstock for horizontal milling, 1 HP brushless motor, a multi-function digital depth scale on the quill, push-button speed control and digital spindle tachometer. The back-lit digital tachometer tells you the precise spindle speed for matching tooling and material. All of these extra features make the M1111 Milling Machine one of the most sought after machines available.

Details
G0454Z – 20″ 5 HP Planer w/ Spiral Cutterhead

$3,700.00
Put this 20" Planer in your shop without breaking the bank. Solid cast iron and steel construction and large planing capacity make this planer a true heavyweight. However, with a foot-operated caster system, you won't need to manhandle this planer around your shop. You'll also appreciate the 55-1/2" long precision-ground table, 5 HP motor and the two-speed gear box for maximum versatility. The G0454Z has a spiral cutterhead with 4-sided German-made carbide inserts for ultra smooth surfaces. CSA certified meeting CSA & UL standards! Note on replacement inserts:
- For models manufactured April, 2015 and later, use H7319 replacement inserts.
- For models manufactured March, 2015 and earlier, use T21348 replacement inserts.
SPECIFICATIONS:
- Motor: 5 HP, 240V, single-phase, 19A
- Maximum stock width: 20"
- Maximum stock thickness: 8"
- Minimum stock thickness: 3/16"
- Minimum stock length: 8"
- Maximum cutting depth: 1/8"
- Cutterhead type: 4-row spiral, 98 inserts
- Insert size & type: 14mm x 14mm x 2mm, indexable carbide
- Cutterhead speed: 4800 RPM
- Feed rate: 16 FPM & 20 FPM
- Table size with extensions: 20" x 55-1/2"
- Dust port size: 5"
- Overall dimensions: 55-1/2" L x 39-1/2" W x 45-7/8" H
- Approximate shipping weight: 932 lbs.
FEATURES:
- Built-in mobile base
- Precision-ground cast-iron table and extension wings
- Board return rollers
- Rubber-coated outfeed roller
- Adjustable bed rollers
- Magnetic switch with thermal overload protection
- Four-column support with table locks
- Two-speed feed rate
- Certified to CSA & UL standards
Add to cart Details
SJO-99402k Sjobergs Elite 2000 Combo w/ SM04 Cabinet +Access Kit

$3,725.00

Add to cart Details
Saw Trax C64SM Sign Makers Package Panel Saw

$3,751.55
Sign Shops cut a variety of material, not just wood, materials such as aluminum composites, corrugated plastics, foam board, PVC material, wood and much more. For some time, sign shops had to use different machines to cut each material. Thankfully, those days are gone, with the help of our Sign Maker’s Series. C64SM model features a 60" wide frame for size restricted shops and a 64" vertical cut. Also available in Full Size models. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
- Compact 60" Wide Frame
- Makita 5007F 7.25" saw
- Spinning saw insert plate
- Spring Hold Down
- Pivoting Knife Cutter
- Dust hood, hose, brush
- Folding Stand and Wheels
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
[/fusion_checklist]
Add to cart Details
Out of stock

Saw Trax Compact Varsity Package Panel Saw — 64in. Cross Cut Capacity, Model# C64VP

$3,752.00

The Saw Trax Compact Varsity features big machine cutting capabilities in a smaller size frame. Compact frames are perfect for space restricted shops or for taking to the job site. The Varsity Series panel saw is a compact unit that includes standard features plus an accessory package recommended to most woodworkers. Ideal for customers who need to break down 5 foot sheet goods that are less than 1 3/4in. thick with precision cuts. A Makita 5007N circular saw and the best dust collection hook ups possible are provided with this machine. U.S.A.

What's Included

Details
Out of stock

Saw Trax 1052 Full Size Panel Saw

$3,781.00
The Saw Trax Full Size 1000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 1052 features a 52″ vertical cut. This series includes an accessory package recommended for most general wood workers. This 1000 series are ideal for customers that need a vertical panel saw to perform precision cuts in sheet goods that are less than 1 ¾ inches thick. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
- Full Size 120" Wide Frame
- Makita 5007F 7.25" saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
[/fusion_checklist]
Details
Out of stock

Baileigh RIVING KNIFE TABLE SAW TS-1040P-30

$3,799.00
We designed this 550-pound cabinet saw for professional accuracy. The steel base and cast-iron table reduce vibrations and keep correct alignment, so you can make perfect joints. Buy this table saw riving knife online today.
- 30” right-side rip capacity. (Also available in a 50” rip model.)
- 3 hp motor turns at 4,300 rpm
- Runs on 220-volt single-phase power, so it will work in almost any shop.
- Uses standard 10” bladeswith ⅝” arbor.
- Includes standard and dado inserts.
- 40” x 27” table, made of cast iron, with 30” extension boards, made of impregnated poly, help you handle large, awkward pieces.
- Tabletop is webbed into the base to stay square and true. Heat and moisture in your shop won’t warp it.
- Wood glides across the ground and polished cast iron table surface. You can bring back the original smooth shine even after years of use.
- Rip fence made of heavy UHMW plastic makes it easy for you to slide wood.
- You can inexpensively replace the rip fence plastic—convenient if you drill into it while using a unusually-shaped jig.
- Steel handwheels with locks on the base let you adjust the blade height and miter angle.
- Comes standard with a miter gauge for repeatability.
- Trunnion attached to the base prevents the machine from wobbling and keeps noise within a safe decibel range.
- Rigid all-steel base keeps the saw stable and aligned, so the blade will cut correctly (without unintended movement or mitering).
- 4” dust collection port to hook up an extraction system and suck out sawdust.
- CSA approved, with safety features like an anti-kickback blade guard and a quick-release riving knife.
- Covered by a 1-year parts warranty.
- You can count on lifetime technical support by phone. Call up our team of reps (all with hands-on machine experience) whenever you have questions or problems.
- We typically keep all replacement parts in stock for fast deliveries.
Recommended for: Cabinetry, kitchen build-ins and shelving, furniture, live edge, or reclaimed lumber.
Details
Out of stock

BAILEIGH INDUSTRIAL 1008627 DOWNDRAFT TABLE DDTM-5922

$3,799.00
https://youtu.be/71kgEkUFmfk Whether it is before or after, often at welding workstations grinding on the work piece has to be done. But this is a messy proposition for most shops. The DDTM-5922 downdraft grinding table from Baileigh Industrial can help. This easy to use down draft table takes all the little partials that float around the shop and pull them straight down into a contained unit and also help to clean the air. What is unique about the DDTM-5922 metal working downdraft table is that it is a self-contained unit and there is no need to hook it up to external extraction systems. It operates on 110 volt power and has two .5hp motors that produce 1790 CFM per motor. That is a lot of sucking power to keep the area clean. The filters are also fire resistant on this grinding station making it very safe as well. Order this downdraft dust collector from Baileigh Industrial.
- 59" x 22" downdraft table
- 3 mm thick stainless steelwork surface
- Perfect for grinding and sanding
- Dual motors 1790 CFM per motor
- Fire resistant air filters
- Easy clean out chip compartments
- 110V
Details
Out of stock

RIKON Power Tools 10-347 I18 18″ Professional Bandsaw with 4HP Motor

$3,799.99

The 18” Bandsaw #10-347 has one of the most powerful motors in the line, 4HP with 19″ of re-saw capacity, which makes it ideal for woodworkers doing a lot of heavy re-saw work. Professional features include patient pending spring loaded tool-less guide system, massive cast iron table with quick adjust trunnion system, substantial quick adjust 6” tall rip fence system, key activated safety on/off switch, micro safety on/off switch activated door & foot brake. Under the top door blade tension release levers with blade tension hand wheel are easy to access from the front of the saw.

Details
Out of stock

Shop Fox W1863 12″x 15″ 3-Hp Spiral Cutterhead Planer

$3,799.99
W1863 Shop Fox 15" Helical Cutterhead Planer

Produce smooth, even surfaces with this feature-rich 15" planer.
Planing creates uniform thickness and flatness in wood pieces, making them easier to work with and enhancing their overall quality. The 15", 4-row helical cutterhead comes complete with 52 indexable carbide inserts that can each be rotated three times to expose new, sharp cutting edges. The inserts sit at a slight angle to the for smooth shearing cuts, minimized tearout, a smoother finish, and operating at lower noise levels. A 230-volt, 3 horsepower motor powers through cuts up to 3/32" deep at full width or 1/8" deep on material up to 6" wide. The 2-speed gearbox allows you to choose between 16 and 28 FPM for a smooth finish or high-production feed rate. Other features include a pedestal-mounted switch, precision-ground cast-iron infeed and outfeed tables, and large board return rollers for efficient production. Like all Shop Fox planers, the W1863 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The W1863 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your sander. The Customer Service and Technical Support Teams are also U.S.-based. Parts for the planer may be available online and shipped from the parts warehouse in Springfield, MO. Made in an ISO 9001 factory CSA certified
SPECIFICATIONS:
- Motor: 3 HP, 230V, single-phase, 12A
- Maximum cutting width: 15"
- Maximum cutting height: 6"
- Minimum stock length: 6"
- Minimum stock thickness: 3/16"
- Maximum stock thickness: 6-1/8"
- Maximum depth of cut full width: 3/32"
- Maximum depth of cut 6" wide board: 1/8"
- Cutterhead type: 4-row helical, 52 inserts
- Cutterhead speed: 5000 RPM
- Feed rate: 16 FPM, 28 FPM
- Table size: 15" W x 48" L
- Overall dimensions: 37" W x 48" D x 44" H
- Approximate shipping weight: 553 lbs.
FEATURES:
- Two-year warranty!!
- Helical cutterhead with indexable carbide inserts
- Extra-large ball-bearing return rollers
- Large side-mounted handwheel
- Cabinet style stand
- Internally mounted 3hp motor
- Triple v-belt drive
- Pedestal-mounted control panel with e-stop
- Anti-kickback fingers
- Oil-bath style gearbox for drive system
- Triple belt drive inside housing
- Heavy-duty cast-iron extension wings
Details
Out of stock

Grizzly G0697X 12″ 7-1/2 HP 3-Phase Extreme Series Table Saw

$3,845.99
- Motor: 7.5 HP
- Tablesaw type: Cabinet
- Blade size: 12 in.
- Maximum cutting height @ 90deg: 4 in.
- Maximum cutting height @ 45deg: 2-3/4 in.
- Maximum ripping capacity - right: 36 in.
- Table type: Precision-Ground Cast Iron
- Overall table size: 48-1/4 in. x 30 in.
- Shipping weight: 698 lbs.
Details
Oneida Supercell Turbo 14-Gal 6.75 Hp Portable Dust Collector XSK414000-P

$3,895.00

Add to cart Details
Safety Speed Cut H6 Vertical Panel Saw

$3,899.00
- Standard Equipment
  
  Zinc plated 1¾”steel guide tubes.
  
  4 Nylatron roller bearing systems.
  
  Milwaukee Tool Motor
  
  Adjustable vertical and horizontal rulers.
  
  Quick change from vertical to horizontal cutting.
  
  Thin material pressure guard.
  
  Injection-molded plastic material rollers.
  
  Spring loaded counter balance system.
  
  Integrated dust collection bonnet.
  
  Extended warranty.
  
  TUV certified to UL/CSA standards
Add to cart Details
DELTA 36-L336 3 HP Unisaw with 36-Inch Biesemeyer Fence System

$3,945.99
Delta’s 36-L336 left tilt cabinet saw is ideal for woodworking, cabinet making, and boat building. It features up-front dual-crank controls with locking cams, speedometer style scales and a 36 inch Biesemeyer fence. The 3 HP 230V motor cuts hardwoods and engineered products like MDF and melamine. The riving knife enables tool-less adjustment for through- and non-through cuts including grooves for shelves and picture frames as well as dadoes, rabbets, and cheek cuts for furniture. The single-cast trunion provides increased vibration control. Largest throat plate in category eases blade changes. Storage under the table board is convenient and expandable. Bi-level dust extraction improves dust collection.
- Bi-Level Dust Extraction for improved dust collection
- Single-Cast Trunnion System provides increased accuracy
- Sure-Lock Dual Front Cranks provides convenient access to dual front cranks
- Precision Bevel Gauge for ease of visibility; Tool-Free Split Guard for improved blade line of sight
Add to cart Details
Saw Trax 1064 Full Size Panel Saw

$3,999.00
The Saw Trax Full Size 1000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 1064 features a 64″ vertical cut. This series includes an accessory package recommended for most general wood workers. This 1000 series are ideal for customers that need a vertical panel saw to perform precision cuts in sheet goods that are less than 1 ¾ inches thick. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
- Full Size 120" Wide Frame
- Makita 5007F 7.25" saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
[/fusion_checklist]
Add to cart Details
Delta Woodworking 31-481 26-Inch Dual Drum Sander, 3-HP, 230V

$3,999.99
[fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
- Rear roller adjustment dials ensure rear drum is level
- Heavy duty steel frame design with superior finish for long-lasting durability
- Latching top door provides direct access to dual drums for ease in sanding wrap changes
- Toolless drum wrap tensioning clamps make installation and removal of sanding strips easy, requiring less downtime
- Magnetic on/off main motor switch; removable key switch for variable speed feed belt motor
- Two 4 in. dust ports for efficient dust collection requiring a total of only 600 CFMIncludes (2) 4 in. integral dust ports, feed belt, (2) sanding drums, (1) 80 grit and (1) 120 grit sanding strips
- CSA Listed
[/fusion_checklist]
Add to cart Details
Out of stock

Baileigh Industrial FINGER BRAKE BB-5014F

$4,019.00
This box brake brake lets you clamp sheet metal with a foot pedal, so both hands are free to position the material.
- Bends a maximum capacity of 14 gauge mild steel across the brake’s full 50” length.
- Adjustable stop rod makes it easy to produce repeatable bends.
- Knobs at each end of the brake let you finetune the clamping pressure to fit your application.
- Includes 12 fingers of varying widths that you can easily rearrange to create different sizes of tanks, pans, boxes and more.
- Spring-loaded cylinder assists in lifting the apron, which you’ll find particularly useful when bending at full capacity.
- Blade gap adjustment enables you to take on various gauges of sheet metal.
- Made with a fully-welded steel framework to maintain accuracy and reduce deformation.
Details
Sjobergs Elite 2500C Workbench + Sm-04 Cabinet Combo SJO-66923K

$4,100.00
The Sjobergs Elite line of workbenches represents the highest quality you can get in a professional workbench. The Elite 2500C Workbench with SM04 Cabinet and Accessories combo provides fine furniture makers, carpenters, and serious woodworkers alike with a top-of-the-line space to craft your finest pieces.
- Massive 98” long worktop with included Elite Clamping Platform
- Double row of dog holes running from any vise location
- Includes 4 bench dogs
- SM04 cabinet provides extra storage solutions for hand tools, power tools, drill bits, etc.
- Accessories kit includes one 1” Holdfast, one Universal Anvil, and a set of Jaw Cushions
- Constructed of European beech and thoroughly treated with top-quality oil
- Left- or right-handed use
Add to cart Details

Baileigh IP-156-HH – SPIRAL HEAD PLANER

$4,195.00

tem Number	IP-156-HH
Shipping Weight	600lbs
Table Size (Length)	48"
Table Size (Width)	15"
RPM	5000
Maximum Depth of Cut (Resaw)	1/8"
Cutter Head Diameter	3"
Max Stock Width	15'
Maximum Stock Height	6"
Minimum Stock Thickness	3/16"
Minimum Stock Length	6"
Feed Speed	16/20 FPM
Table Elevation	Manual
Power	220V Single Phase
Horse Power	3
Weight (lbs)	520
Number of Inserts	68
Insert Rows	4
Shipping Dimensions (Inches)	60x44x52

Details

Out of stock

Baileigh Industrial Reversible Finger Brake BB-5016F-DS

$4,249.00
The BB-5016F-DS sheet metal bending brake incorporates segmented fingers on the top and lower lifting beams to make unusual bends that a standard box brake can’t do. Order this 16 gauge box and pan brake from Baileigh Industrial.
- 50” length.
- 16 gauge mild steel maximum capacity box and pan brake.
- You can clamp the material with the foot pedal, so that both hands are free for positioning the sheet metal.
- Segmented fingers on the lower lifting beam let flanges and flaps hang down while still allowing you to get close to the bend line.
- Adjustable stop rod helps you make repeatable parts for production runs without difficulty.
- Simple blade gap adjustment lets you work on various gauges of sheet metal.
- Spring-loaded cylinder assists in lifting the apron, saving effort for the operator.
- Hardened fingers and bending die will last through years for productive use.
Details
Delta 36-L352 3 HP 10 in. Single Phase Motor Left Tillt 10 in. UNISAW with 52 in. BIESEMEYER Fence System

$4,259.50
FREE DUST COLLECTOR Featuring a single cast iron trunion system for vibration free control, continuous smooth operation and dependable accuracy. The Delta 36-L352 10-Inch UniSaw with the Biesemeyer 52-Inch fence system is ideal for woodworking Professionals. Complete with upfront bevel dial for easy fine tuning of the blade bevel that is accurate to within 1/4 Degree, this system ensures precision set-ups, cut after cut. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
- The 36-L352 consists of; 36-L300 - 3HP, left tilt Unisaw body, 78-055B - 52Inch Black Biesemeyer Fence rails, 78-919B - Biesemeyer black fence Body, 78-919B - UniSaw Black table board
- Dual Front Cranks For Easy Adjustments combined with the largest blade opening in its class makes fine tuning your riving knife and blade changes easier than ever with a single push-button arbor lock for ease of use
- Improved Table-Top Geometery provides more Table surface and greater Stability to the material being cut
- Sturdy Cast Iron Base for stability and vibration free operation. The ON/Off Switch is multi-directional and can be activated from any angle
- Tool Free Split Guard Design with a true rise and fall riving knife for through and non-through cuts is first in class
[/fusion_checklist]
Add to cart Details
SJO-99403K Elite 2000 Workbench + Cabinet SM04 + Clamping Platform + Acc. Kit

$4,275.00

Add to cart Details
Saw Trax 1076 Full Size Panel Saw

$4,313.00
The Saw Trax Full Size 1000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 1076 features a 76″ vertical cut. This series includes an accessory package recommended for most general wood workers. This 1000 series are ideal for customers that need a vertical panel saw to perform precision cuts in sheet goods that are less than 1 ¾ inches thick. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
- Full Size 120" Wide Frame
- Makita 5007F 7.25" saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
[/fusion_checklist]
Add to cart Details
Saw Trax FS52SM Sign Makers Package Panel Saw

$4,321.55
Sign Shops cut a variety of material, not just wood, materials such as aluminum composites, corrugated plastics, foam board, PVC material, wood and much more. For some time, sign shops had to use different machines to cut each material. Thankfully, those days are gone, with the help of our Sign Maker’s Series. FS52SM model features a 120" wide frame and a 52" vertical cut. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
- Full Size 120" Wide Frame
- Makita 5007F 7.25" saw
- Spinning saw insert plate
- Spring Hold Down
- Pivoting Knife Cutter
- Dust hood, hose, brush
- Folding Stand and Wheels
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
[/fusion_checklist]
Add to cart Details
Out of stock

70-3040 Rikon 30” x 40” VSR Lathe with Sliding Bed

$4,379.99

Motorized Sliding Bed – Increase spindle length 20” up to 40” • Motor & Switch – Beefy 3HP motor delivers ample power • Index Head – 3-Step, multi-V pulleys include 36 index positions • Control Box – Magnetic back positions controls anywhere on long bed • LCD Speed Display – Big easy-to-read speeds from 20 to 3850 RPMs • Banjo – Cast iron tool rest base is extra wide and sturdy
RIKON’s Heavy Duty 70-3040 Variable Speed Lathe features an innovative SLIDING BED that increases your turning capacity with just a turning of a switch! The special motorized upper bed effortlessly moves to the right

away from the headstock to double the standard between-centers distance from 20” to 40”! Moving the sliding bed also increases the swing from 25-3/16” to 31-13/16” over the lower bed! Ideal for turning large bowls or platters. This space-saving lathe is extra heavy-duty, made of solid cast iron and steel construction to provide professional turners with a robust machine that will take the stress when turning large diameter bowls or spindles. The 3HP TEFC, 220V motor combined with 4 heavy-duty bearings in the headstock and digital speed controls provide all the power and precision needed for this versatile lathe.
» Read Less

Details
South Bend SB1108 – 15″ Planer with Helical Cutterhead

$4,435.99

Designed with the exacting tolerances your shop demands, the SB1108 South Bend 15" Planer is top of its class in precision workmanship and dependability. The helical cutterhead delivers near mirror-smooth finishes right out of the gate. It consists of four rows of 52 indexable carbide inserts, each angled slightly to produce a shearing action. This shearing action results in less tearout in highly figured woods and quieter operation—and the planed surfaces are far superior to what you'll get with 15" straight-knife or other spiral cutterheads on the market. Other high-end features include a digital table height scale for ultra-precise and consistent thickness adjustments, precision-ground cast-iron tables, and triple belt drive—everything that makes this 15" planer truly live up to the South Bend name. The SB1108 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. South Bend tools come with a 2-year warranty which covers parts and assures the unit is free from factory defects. The South Bend Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the jointer are available online and shipped from the South Bend parts warehouse in Springfield, MO.
No more messing around. This will be the last 15" planer you'll ever need to buy.

Add to cart Details
Kreg DK1100TP Benchtop Single-Spindle Pneumatic Pocket-Hole Machine

$4,499.00

The DK1100 series of machines are the standard in the industry for drilling a single pocket hole at a time. We’ve packed a ton of functional features into these machines that set them apart from the competition. Choose from electric- or pneumatic-powered, freestanding or bench-mounted to fit the way you build. Each DK1100 machine is built with industrial-grade motors that provide the power to run day after day – quickly, quietly, and reliably – in even the most high-production environments. For most shops, this translates into previously unheard of productivity and efficiency.This model is identical to the DK1100 FP, but comes in a much smaller frame. It features a table height of 8", making it easy to build into your workbench or relocate from time to time. Requires a compressor able to produce 8 CFM at 120 PSI (50% duty cycle). Convenient Swing Stops Quickly position two pocket holes across rails of various widths by placing it against one stop, drilling the hole, and then repeating with the rail against the other stop. For drilling pocket holes in panels, the stops simply swing out of the way. Adjustable Fence Adjustments couldn’t be easier, as the fence adjusts directly from the top side of the machine to let you center a screw in 1/2"- to 1 1/2"-thick material. The clamp hold-down also adjusts to allow materials up to 4"-thick to be drilled. Quick Drill Bit Changes Changing drill bits is a quick and easy process. Simply loosen the collet with the provided Allen wrench, replace with a new bit, and you are back in production in less than 60 seconds. Long-Lasting Motors The industrial-grade motors used in Kreg machines are built for long-lasting service. Kreg machines are designed to minimize stress on moving parts, greatly reducing the likelihood of failure.

Add to cart Details