-
Out of stock
Our line of JET Parallel Clamps is not known just for its name, but its reliability and sturdiness as well. With an exclusive design, it provides precision and power with exact 90 degree clamping at up to 1,000 lbs of pressure. Each clamp is equipped with the ergonomic SUMOGRIP handle integrated with soft grip technology for added comfort and torque. Reversible clamping movable jaw can be reversed to be used as a spreader. -
Out of stock
Features:- Unique roller system holds down workpiece and pushes into fence for precision stock feed
- 1-1/2" urethane one-way rollers set at 5° toward fence and 2-3/4" total adjustment
- Maximum stock thickness from router table surface to 9/16" below center of T-slot
- Compatible with most router table fences with a horizontal 1/4" T-slot above the fence faces
- Includes one infeed stock guide, one outfeed stock guide and detailed instructions
-
- Compatible with all Bosch 12-Volt Max Tools and chargers
- 2.0Ah Capacity
- Performs in cold temperatures down to -4 degrees F
- Most Compact: Smallest and lightest battery pack with 2.0Ah in the market
- High Quality Lithium-Ion cells
- Comes with BC3301 Charger and BAT414 Battery
-
The Universal Saw Indicator is used to measure alignment of the table saw blade relative to the table (and the miter slot) to allow fine adjustment of blade parallelism. When adjusting fence spacing relative to the blade, it can also be used to measure very small changes in fence parallelism . Attach it to steel cross fences (which ride in the miter slot) or to ferrous table saw tables. The indicator is attached via an adjustable slot, allowing it to slide to fit a wide variety of miter slot spacings.FEATURES
- Works with cross fences for easy measurement of table and blade alignment.
- Allows for micro adjustment of the table saw fence in any position.
- Fast actuation of 2 magnets with a linked push pin.
- Compatible with a wide variety of table saw makes and modes.
SPECS
- Nominal Max Breakaway Force: 120 lbs/ 54 kg
- Nominal Maximum Shear: 18 lbs / 8.1 kg
- Net Weight: 1.2 lbs / 0.55 kg
- Footprint: 4.9″ x 5.9″/ 125 mm long x 150 wide
-
Clean edges, square shoulders, and flat bottoms: the Freud SD208 Eight-Inch Professional Dado Set cuts with ultimate precision, so you can achieve them all. This is your go-to set for efficiently creating dadoes and grooves in a wide range of materials from hardwood to laminate. Boasting thick MicroGrain carbide tips and an anti-kickback design, the set's two outside blades can be resharpened for long-term accuracy. For added versatility, the kit cuts grooves spanning 1/4 to 7/8 inch and includes a shim set.The perfect dado set for the fine cabinetmaker or weekend woodworker, the Freud SD208 produces dadoes and grooves that meet with flush, even edges. So you can be assured of precise cuts every time, the set is equipped with precision-grade features, starting with two proprietary outside blades that can be resharpened to deliver accuracy for the long term.These high-quality eight-inch, 12-tooth blades with 5/8-inch arbors cut dadoes and grooves that are clean, flat, and virtually splinter free. Cuts made by these blades are accurate the first time, saving you from making repeated passes over the same workpiece. -
- 8" Dado Set, 5/8" Arbor
- Does not need dado set or saw blade
- Features Premium TiCo™ HI-Density Carbide Crosscutting Blend for Maximum Performance
- Silver I.C.E. Coating prevents build up on the blade surface and keeps the blade running cooler and cleaner
- All blades and chippers come with Freud’s anti-kickback design
-
Out of stock
-
- LED LIGHTING: Keep your work illuminated with the LED lighting array located just below the quick-connect chuck
- TEXTURED HANDLE: The compact design of this power tool is complemented with the textured rubber grip, which gives you superior handling, even in slippery conditions
- VARIABLE SPEED TRIGGER: Apply pressure to the trigger to match the amount of power you need on the job. This can drive the motor to create up to 3,450 impacts per minute
- REDLINK TECHNOLOGY: Electronics inside the impact driver communicate with the M18 batteries that power it to reduce the risk of overheating, which results in more efficient work
- M18 COMPATIBLE: This cordless Milwaukee impact driver works with the M18 family of lithium ion batteries. Compatible models include the 48-11-1860, 48-11-1850, 48-11-1828, and 48-11-1815, 48-11-1840, 48-11-1820
-
Out of stock
-
Out of stock
The Triton track has a length of 1500mm / 59-inches. Specifically for use with the Triton Track Saw TTS1400. For straight, clean, accurate cuts through any type of wood. -
-
Out of stock
Finally--zero clearance insert for the 12" Bosch Glide.A wonderful saw such as this needs a great ZCI to perfect it. This Colliflower ZCI incorporates new technology for easy-in/easy-out insert replacement. No need to unscrew and take out the plate in order to replace the 5mm EPVC insert--just slip it in and out as desired! In such a way, one can easily keep a replaceable insert on hand for the different cut angles: When cutting at a 90, use the 90-degree insert; when cutting at a 45, slip out the 90 and slip in the 45--easy! The plate is made of high-quality 6061 aluminum. Powdercoat finish for durability. Replaceable inserts available for purchase.
-
- Genuine Delta product
- Fits these Delta air cleaners: tAP200, 50-860, 50-868 and 50-875
- 1 Micron
- Tool-free installation process
- Filter measures 23.75 x 11.75 x 2 inches
- Includes one filter
-
The Diablo 14-Piece Hole Saw Kit features ten (10) bi-metal hole saw cups, 1 piece SnapLock PLUS mandrel, 1 pilot bit and 2 adaptor nuts (1/2" and 5/8") for quick and easy hole saw cup changes for maximum job performance. This new, high performance hole saw set delivers faster cutting performance and increased productivity versus standard bi-metal hole saws. This set includes a heavy duty, durable case for easy and convenient storage of hole saws. 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity SnapLock Plus mandrel system includes: mandrel, pilot bit, 5/8 in. threaded adaptor (fits diameters 1-1 /4 in. to 6 in.) and 1/2 in. threaded adaptor (fits diameters 9/16 in. to 3-1/16 in.) 1-size fits all mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. Dia Tool-free plug ejection for fast material removal 20x longer cutting life and 10x faster cutting in hard materials -
Out of stock
Biesemeyer deluxe Drill Press Fence.- Adjustable stop for repetative work
- Can be positioned high/low for different applications
- Fits most drill presses with "T" slots or thru holes
-
Out of stock
-
Out of stock
-
Out of stock
- High-speed steel construction means longer cutting life between sharpenings
- Knives are hardened and tempered to 62-64 Rockwell for durability
- Precision-balancing ensures quality cuts every time
- Compatibility with many other brand tools lets you buy these knives with confidence
-
Out of stock
-
Out of stock
Genuine OEM Replacement Carbide Inserts – 10-Pack These OEM replacement inserts are specifically designed to fit all JET and Powermatic jointers and planers that utilize the Byrd Shelix... -
Mixed six-blade set for applications in metal, wood and other general-purpose materialsIncludes OSL114, OSL114JF, OSL114F, OSL114MF and OSL212F plunge blades, and the OSL3121F segmented bladeColor coded interface and laser etched blade to quickly identify the right bladeStarlock® Interface for Professional Performance, also works with OIS® compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid, othersPrecision Swiss made bladeIncludes(1) OSL114 , (1) OSL114JF , (1) OSL114F , (1) OSL114MF, (1) OSL312F , (1) OSL212FSpecificationsBlade Material: Carbide, Bi-metal, High Carbon SteelContents: 6 BladesName: OSL006Number of Pieces: 6Material Details- Net Weight: 0.6140 LB- Dimensions (IN) : 1.1250 x 9.1250 x 11.8120- Delivery Unit: IN -
The Powerful 1200W motor for rapid stock removal with variable speed control. Small diameter front roller for sanding confined areas and detailed work. Features:- Powerful 1200W motor for rapid stock removal
- Variable speed control improves versatility when working with different workpieces
- Side dust port connects to the supplied dust bag or dust extraction system
- Belt tracking adjustment for accurate alignment of the sanding belt
- Rubber over-moulded grip offers increased support, safety & control of the tool
- Lock-on button adds convenience with extended use
- Small diameter front roller allows for sanding in confined areas
- Power-on neon increases operator safety
- Removable bail handle increases support & safety
- Easy access brushes allows changing of worn brushes
-
Out of stock
- Brand new in box
- Electronic Clutch for Kickback Protection
- Overload Protection to Maximize Motor Life
- Anti-Vibration Side Handle for Increased User Comfort and Safety
- Compatible with all M18 batteries
- 5/8"-11 Spindle for Use with Common Grinding Accessories
-
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com