-
IVY Classic Non-Magnetic Spring Nut Setters are designed to securely hold stainless steel hex head screws and nuts using a ball with spring retention The Alloy-Steel body is designed to withstand the high torque (rotational force) of impact drivers, Impact Plus (Registered Trademark). Our lobular design reduces the stripping of the corners of the nut, fasteners are driven on their flat sides instead of their corners. IVY Classic Industries manufactures an extensive line of nut setters in a variety of sizes and lengths. IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. -
Sale!
Out of stock
71293462090, FEIN AMM 700 MAX SELECT SET CORDLESS OSCILLATING MULTITOOL
Our best cordless MultiTool for ultra-rapid work progress with interior construction and renovation in the variant without a storage battery and charger – with a bi-metal saw blade for wood, metal, and plastics. Features:- Anti-vibration: Minimal vibration and outstanding noise dampening means you can work comfortably, for longer.
- StarlockMax tool mounting: Work faster and with higher precision thanks to 100% no-loss power transmission.
- QuickIN: Change accessories in under 3 seconds with a patented, tool-free, FEIN rapid-clamping system.
- With the StarlockMax tool mounting, you have access to around 180 FEIN accessories in the Starlock, StarlockPlus and StarlockMax performance categories.
- 18 V FEIN PowerDrive motor: Especially powerful, virtually wear-free brushless motor with high efficiency, extremely high load handling and long service life.
- Variable Speed: Constant speed even under load and variable electronic speed control.
- Metal drive head: 100% of gearbox components are made from metal providing high load capacity and long service life.
- Mechanical interface: For stationary use in the table or drill jig holders, or to attach depth stops.
- SafetyCell technology: Perfect protection from overload, overheating and deep discharge thanks to Li-ion batteries with individual cell monitoring.
- Dust protection grille - protects tool from aggressive dust.
- The battery capacity can be read directly on the battery.
- Specifications:
- Battery voltage 18 V
- Battery compatibility Li-ion / HighPower Li-ions
- Battery interface MultiVolt
- Oscillations 10,000 - 19,500 opm
- Tool mount StarlockMax
- Tool change QuickIN
- Range 2 x 2,0°
- Weight without battery 2.43 [1.10] lbs[kg]
- Sound pressure level LpA 83 dB
- Measurement uncertainty of the measured value KpA 3 dB
- Sound power level LWA 94 dB
- Measurement uncertainty of the measured value KWA 3 dB
- Peak sound value LpCpeak 97 dB
- Measurement uncertainty of the measured value KpCpeak 3 dB
-
Metal/Stainless Steel Thin Cut-Off Blades - Swift Cut® Abrasive You are purchasing one five back.- Type 1 - For Cutting Only
- Designed to cut stainless steel, angle iron, sheet metal and other ferrous metal products, Swift Cut (Registered Trademark)
- Resin bonded Aluminum-Oxide grain for faster cutting, Type 1 blade - for cutting only
- Blade double reinforced with fiberglass mesh for durability and safety
- Arbor reinforced with metal for extra strength
- Diameter: 4-1/2-inch, Width: 0.047-inch, Arbor: 5/8-inch, Max RPM: 13,200
-
The Tormek T-8 is our top of the line water-cooled sharpening system, and is – by far – the best sharpening system one can buy. If you use tools that need a finely honed, razor-sharp edge, this machine will give you a lifetime of excellent service, and ensure your tools have an edge that allows you to effortlessly work your magic. It sharpens all manner of tools – knives, scissors, wood chisels, plane irons, spoke shaves, carving tools, lathe turning tools, Axes, and much more. If it has an edge, the Tormek T-8 will sharpen it. The Tormek Grindstone is constructed so that with the Stone Grader it can be treated to change its property from 220 grit to 1, 000 grit. This has obvious advantages. You can make both the first fast grinding and the sharpening on the same grindstone and the same grinding machine and with the same jig setting. After grinding, the 8-5/8" diameter x 1-7/32" genuine leather honing wheel gently removes the burr and hones the edge to razor sharpness. The T-8 System includes the Advanced Square Edge Jig, Truing and Dressing Tool, Stone Grader, Angle Master, Honing Compound, Handbook and Instructional DVD and comes with a seven-year factory . Also included is Tormek’s patented Drill Bit Attachment which allows you to sharpen your drill bits with the highest precision. The beneficial 4-facet point prevents drill from “walking” that is normal with standard round point bits. The high precision sharpening – both cutting edges are sharpened to an exact equal length and symmetrically – make the drill work efficiently and the life of the drill bit is considerably prolonged. The optimal point and clearance angles can be set according to each drilling requirement, which depends upon the drill size and material. Completely restore worn drills as well as broken drills to a perfect shape. Stainless steel shaft and hardware -
A complete sharpening system for your sharpening needs – this bundle combines the Tormek T-8 water-cooled sharpening system with the HTK-806 hand tool sharpening jig and accessory kit, the TNT-808 Woodturner's Kit, and the SVH-320 Planer Blade AttachmentThe HTK-806 hand tool kit includes 6 jigs for sharpening hand tools like knives, scissors, axes, carving tools, The TNT-808 includes jigs for gouges, chisels, V-tools, roughing gouges, and parting tools. Both come with their own storage case. With the SVH-320, you can sharpen HSS planer blades of any lengthThe Tormek T-8 is Tormek’s most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel, SE-77 Square Edge Jig to sharpen chisels and plane iron blades, PA-70 Honing Compound, WM-200 Angle Master, TT-50 Truing Tool, and Tormek Handbook.Includes: Tormek T-8 Original, KJ-45 Centering Knife Jig. KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder, SVX-150 Scissor Jig, SVA-170 Axe Jig, SVS-38 Short Tool Jig, TC-800 Tormek Case, HTK-00 Storage Tray for Hand Tool Kit, TTS-100 Turning Tool Setter, MH-380 Machine Cover, LA-120 Profiled Leather Honing Wheel, TC-800 Tormek Case, TNT-00 Storage Tray for Woodturner’s Kit, SVD-186 R Gouge Jig, SVS-50 Multi Jig, SVD-110 Tool Rest, and SVH-320 Planer Blade AttachmentNote: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine. -
Out of stock
Fits most AAA, Delco, DeWalt, Excell, Simpson pumps -
1 year warranty-
From Oneida, the Supercell Turbo Charged, model XSK-414000, features everything you know and love regarding the original line of Supercell but features 30% more airflow. The Supercell Turbo is ideal for handheld and portable tools, especially small CNC routers. The adaptable design mounts easily to the wall and can be installed virtually anywhere in the shop, connecting to tools by up to an astounding 100' of 4" house or ductwork.
Features- 10x higher suction pressure than standard dust collectors and 30% more airflow over the classic Supercell
- Universal design collects from an 1" to 5" diameter port through up to 100' of hose and ductwork
- 14-gallon dust bin with automatic bag holder and fill level indicator
- HEPA-grade media filter with internal pulse filter cleaner
- Compact, wall-mounted design ideal for smaller shops with limited space
- Combined 6.7HP, 230V High Pressure Fan Motors
- Supports up to three 1" to 2.5" Dust Ports
- Wireless radio frequency remote control Key Fob
- Heavy-gauge steel cyclone pre-separator
- Internal pulse filter cleaner system
- Reinforced dust bin with viewing window
- Automatic bag holder system
- Dust Sentry bin fill level indicator
- NFPA compliance ready
- cETLus: certified to both U.S. and Canadian product safety standards by an NRTL
- Conforms to UL-1017 and Can/CSA-C22.2 # 243 standards
SpecificationsIncludes- Horsepower: 6.7HP
- Motor Type: 4x 1300W Modular Motors
- Voltage: 208-230V
- Recommended Breaker Size: 30A
- Amperage: 22A, 60Hz
- Phase: 1PH (single phase)
- Power Cord: 10', bare wiring - includes 2 hot and 1 ground for direct wiring plug not included
- CFM Rating: 536 CFM @ 2.3" WC, Free Fan CFM: 634 CFM
- Maximum Suction: 97.8WC
- HEPA certified, E12 Minimum Efficiency rating, Merv Rating - MERV 16+
- Total Filtration Area: 40sq ft.
- Waste Capacity: 14 gallon
- Built with cold rolled steel and seam welded
- Static Resistance Rating: Conductive (metal)
- Inlet: 4" O.D.
- Discharge Port: 5" O.D.
- Overall Dimensions: 20" w x 23"d x 61" h allow additional 24" of clearance height for maintenance
- Wall mount bracket for 16" standard stud spacing
- 5 replacement bags
- 4"x25' Vacuum-rated SD urethane flex-hose
- Key Fob
- Blast gate
- Turn Key Clamp: 2 each
- Fan Motor Assembly
- Magnetic Starter
- Remote Control
- Cartridge filter
- Pulse Filter Cleaner
- Cyclone Separator
- Dust Bin
- Dust Sentry bin fill level indicator
- Automatic bag holder system
Only use vacuum pressure rated flex-hose and duct with the Supercell Dust CollectorDue to systems high suction, standard hoses/pipe may collapse and cause damage to equipment or injuryWeight: 76lbsRemote Control is packed in the starter -
-
-
Makita 18V X2 (36V) LXT® Lithium Ion Brushless Cordless Blower, Tool Only Landscapers and contractors are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE that includes the 18V X2 LXT® Lithium-Ion (36V) Brushless Blower. With zero emissions and lower noise, the 18V X2 (36V) Cordless Blower is a welcome solution for clean-up applications. It's powered by two 18V LXT® batteries (sold separately) for maximum power and run time, but without leaving the 18V battery platform. With the efficient Makita BL™ brushless motor, the blower delivers longer run time, increased power and speed, and longer tool life. Makita's efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per battery charge than similar non-brushless tools. Electronic controls efficiently use battery energy to match the changing demands of the application for increased power and speed when needed. With no carbon brushes, the Makita BL™ Brushless motor runs cooler and more efficiently for longer life. When powered by two 18V 5.0Ah batteries, the efficient brushless motor delivers up to 29 minutes of run-time on dial setting #3 on a single charge. Features:- Sound pressure rating of 60.2 dB(A); measured per ANSI B 175.2 standard
- Makita-built motor produces a maximum air velocity of 120 MPH
- 6-stage air velocity/volume selection dial with variable speed control trigger
- Delivers up to 29 minutes of run time at 15,800 RPM using two 18V LXT® 5.0Ah batteries (batteries not included)
- Zero emissions and reduced maintenance; no need for gas or oil
- Two 18V LXT® Lithium-Ion batteries deliver the power and run time for gas powered demands without leaving the 18V LXT® platform (batteries not included)
- Compact and ergonomic design at only 38-3/4" long
- Weighs only 9.9 lbs. with batteries (batteries not included) for reduced operator fatigue
- Features Extreme Protection Technology (XPT™) which is engineered to provide increased dust and water resistance in harsh job site conditions
- Instant start-up; simply load two 18V LXT® batteries and the blower is ready to use
- Dual L.E.D. battery charge indicators show charge level for each 18V LXT® battery
- In-line fan design provides better tool balance and improved ergonomics
- Rubberized soft grip provides increased comfort on the job
- 3-stage telescoping long nozzle for user convenience
- Lock-on button for continuous operation
- Conveniently located hole on housing bottom for easy storage
- Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating
- Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger (battery and charger sold separately)
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol (batteries sold separately)
- 3-year limited warranty
-
- (1) 4" x 24" Abrasive Belt, 80 Grit (742322-9-1)
-
- The original and still the best! Now 20% more efficient with Neutral Vane Technology, the Dust Deputy® Deluxe Cyclone Kit lets you work the way you want to. Injection molded from a translucent anti-static resin, the patented design of the Dust Deputy cyclone uses centrifugal force to capture and remove up to 99.9% of dust and debris from the air-stream before it reaches your vacuum's filter, eliminating clogged filters and suction loss!The Dust Deputy will save you significant time and money on expensive replacement filters and dust bags, and keeps your wet/dry vac operating at peak performance! This simple and efficient design can be adapted for use with any make, size, or model shop vacuum and features tapered 2.0" ports that fit the cuffed 2.5” hoses that come standard with most shop vacuums. The buckets included in the Dust Deputy Deluxe Kit are made from a thick, heavy-duty plastic that is up to 40% thicker than comparable 5-gallon buckets - making them much stronger and able to withstand heavy vacuum pressure.
Learn More
The Dust Deputy Deluxe Kit (ver. B) Includes:
- Anti-Static Dust Deputy Cyclone Separator
- Clear 5-Gallon Collapse-Proof Dust Bucket*
- Quick-Release Bucket Lid w/ Cyclonic Design
- Four Caster Mounts (with insets for storage of 1.5" and 2.5" vacuum accessories)
- Four 1.5" Non-Marking Caster Wheels
- 2" x 3' Clear, Anti-Static Polyurethane Connection Hose
- Two 90 Degree Hose Elbow Adapters
- 2.5" Adjustable Hose/Band Clamp
- Foam Gasket and Mounting Hardware
* Not for use in positive-pressure applications i.e. when connected to a blower instead of a vacuum. A container with a locking lid (such as our 10-gallon kit) is recommended instead.
- The original and still the best! Now 20% more efficient with Neutral Vane Technology, the Dust Deputy® Deluxe Cyclone Kit lets you work the way you want to. Injection molded from a translucent anti-static resin, the patented design of the Dust Deputy cyclone uses centrifugal force to capture and remove up to 99.9% of dust and debris from the air-stream before it reaches your vacuum's filter, eliminating clogged filters and suction loss!The Dust Deputy will save you significant time and money on expensive replacement filters and dust bags, and keeps your wet/dry vac operating at peak performance! This simple and efficient design can be adapted for use with any make, size, or model shop vacuum and features tapered 2.0" ports that fit the cuffed 2.5” hoses that come standard with most shop vacuums. The buckets included in the Dust Deputy Deluxe Kit are made from a thick, heavy-duty plastic that is up to 40% thicker than comparable 5-gallon buckets - making them much stronger and able to withstand heavy vacuum pressure.
Learn More
-
Out of stock
The new JET 1015 is an ideal choice for the novice woodturner looking for an affordable, user-friendly first lathe, as well as the advanced enthusiast or professional who wants to add a full-featured mini-lathe to the shop. This sturdy, smooth-running 15” mini-lathe has the power, precision and versatility to turn out any number of projects. When you're ready to make your ideas a reality... Start Here.
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com