- High performance turbine for 151 cfm (71 l/s) flow rate and 98.4" of water lift (245 mbar vacuum).
- Low volume of 66 dB (A).
- Large range due to 19 ft [6 m] power cord and 13 ft [4 m] vacuum hose.
- Anti-static function against electrostatic charging during work – electrostatically conductive with optionally available suction hose 3 13 45 120 01 0 and tool coupling 3 13 45 300 01 0.
- Large wheels rotate 360° for optimal maneuverability, even in tight conditions.
- Tool coupling with suction control for easy control of suction power.
- Autostart outlet with power-on delay to prevent current spikes.
- Practical storage area with rim.
- Approval for dust class L.
-
Powerful wet and dry vacuum cleaner for connecting power tools during workshop and installation use. Details -
Out of stock
This air filtration system is setting new standards in clean air. With the smart technology the laser sensor continually scans the air in the room for dust, dirt, smoke and other particulates. When it senses those particulates it turns on to automatically clean the air. It senses particles as small as 3 Microns. Since it typically hangs above a tool or workbench the 2 LED lights will help light the project below. You can operate it in manual mode and control three speeds... 1189, 756 & 580 CFM. At top speed you can clean the air in a 20' x 20' x 8' shop in just under 3 minutes, or over 21 times an hour. In the manual mode you can also control the times to set it at 1 to 24 hours by the hour with the convenient remote control. -
Out of stock
G0803Z 9" Benchtop Bandsaw with Laser Guide
Superior cutting performance and portability with enough power to not bog down even on hardwoods.
The Grizzly G0803 that was awarded as Top Value by Wood Magazine for its combination of features including an efficient 1/3 HP motor, heavy-duty feel and portability has been upgraded with a new laser guidance system and adjustable blower to provide superior cutting visibility. The G0803Z 9" Benchtop Bandsaw with Laser Guide features a 62-inch blade and accepts blades from 1/8" to 3/8" wide. It can cut pieces up to 3-1/2" high and has enough power to cut through green woods and other dense materials. The rack-and-pinion table tilt system makes it easy to cut beveled edges. The blade guard is also rack-and-pinion making adjustment an easy one-handed operation. The quality design and construction of the G0803Z assures easy, accurate cuts including fine detailed cuts without the vibration found in other benchtop models. Blade tension and tracking adjustments are simple as turning the respective blade adjustment knob. The small footprint and top handle make moving the bandsaw around your workspace easier. The saw weighs less than 50 lbs. so you can also effortlessly move it between your home, shop or job site. Because of the compact size, the bandsaw will arrive about 80% assembled. It will include a comprehensive operation manual written by our U.S. based Technical Documentation Department making set up a breeze. Like all Grizzly drill bandsaws, the G0803Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the bandsaw are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS:- Motor: 1/3 HP, 120V, single-phase, 2.8A
- Max. cutting width left of blade: 9"
- Max. cutting height (resaw capacity): 3-5/8"
- Blade guides: Ball-bearing upper & lower
- Table size: 12" x 12"
- Table tilt: 0 - 45°
- Blade size: 61-13/16" - 62-3/16" (1/8" - 3/8" wide)
- Blade speed: 2460 FPM
- Overall dimensions: 20-3/4" W x 17" D x 29-1/2" H
- Footprint: 6-1/2" x 15-1/2"
- Approximate shipping weight: 49 lbs.
- Laser Sight
- Adjustable Wheels for Alignment/Coplanarity
- Fence Adjustable for Blade Lead
- Rack & Pinion Table Tilt
- Ball-Bearing Blade Guides
- Quick-Release Blade Tension Lever
- Extruded Aluminum Rip Fence with Camlock Handle
- Lower Wheel Brush to Prevent Build-Up of Dust/Pitch on Wheel
- 2" Dust Port
- Chip Blower
- Work Light
-
Out of stock
General International dust collectors are high quality. This collector that will meet your dust management needs and applications. Designed for industrial applications with a continuous duty rating. The motor is totally enclosed, fan cooled and permanently lubricated. Intake screen prevents larger pieces from jamming in the impeller. Innovative designed to be portable and mobile on 7" rubber wheels. 5" heavy-duty PVC hose between body of fan and collector. It's user friendly and can move around your shop at great ease. Quick-release bag clamps with metal straps. The safety lock-out switch with removable key, helps prevent unauthorized use. The precision aluminum spin-balanced impeller for smooth operation and minimal noise. Includes reusable clear plastic collector bag and washable, extra fine 2 micron filter bag. 6-3/4" static pressure of water. 2 year limited warranty.
-
- Anti-vibration system: Permanently safe, pleasant working conditions with minimum vibrations and outstanding noise damping.
- StarlockPlus tool mounting: Work faster and with higher precision thanks to 100% no-loss power transmission.
- QuickIN: Tool change in under 3 seconds with a patented, tool-free, FEIN rapid-clamping system.
- With the StarlockPlus tool mounting, you have access to around 100 FEIN accessories in the Starlock and StarlockPlus performance categories.
- DC motor: Effective, high-torque motor technology for output that is virtually identical to that of the model with a cord.
- Tacho generator: Constant speeds, even under load, and infinitely variable electronic speed control.
- Metal drive head: High load capacity and maximum service life, since all drive head parts are made of metal.
- Mechanical interface: For stationary use in the table or drill jig holders, or to attach depth stops.
- Electronic cell protection (ECP): ECP protects storage batteries against overloading, overheating and deep discharge.
- COOLPACK technology ensures a longer storage battery service life, enabling longer operation times.
- The battery capacity can be read directly on the battery.
- Compatible with AMPShare/Bosch Professional 18 V batteries from 2008 on.
-
The Delta Mobile Base For 36-L336 36 in. UNISAW (For Dual Front Crank Unisaws) is essentially for easily moving your Delta Unisaw. Made from Steel in the US. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]- Adds mobility to your saw in your workshop
- Adjustable feet provided for leveling saw
- Heavet duty steel, designed specifically for this new Unisaw
-
Out of stock
- Bi-metal E-cut Blade for SuperCut only
- For wood, plastic, aluminum, copper, and sheet metal up to 18 gage
-
Out of stock
-
Out of stock
Shop Fox W1878 9" Benchtop Bandsaw
A small footprint and top handle make moving around your workspace easier.
The Shop Fox W1878 9" Benchtop Bandsaw has a combination of features including an efficient 1/3 HP motor, LED work light, deluxe extruded aluminum fence, and a rack-and-pinion table tilt system. The blade guard is also rack-and-pinion making adjustment an easy one-handed operation. The quality design and construction of this bandsaw assures easy, accurate cuts including fine detailed cuts without the vibration found in other benchtop models. Accepting 62-inch blades 1/8" to 3/8" wide, this benchtop bandsaw can cut pieces up to 3-5/8" thick. The blade guides are dual ball bearing and the wheels are adjustable for quick alignment and coplanarity. And, with this saw weighing less than 50 pounds, you can also effortlessly move it between your home, shop or job site. Like all Shop Fox bandsaws, the W1878 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. The W1878 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your saw. The Woodstock Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the bandsaw may be available online and shipped from the Woodstock parts warehouse in Springfield, MO. Made in an ISO 9001 factorySPECIFICATIONS:
- Motor: 1/3 HP, 120V, single-phase, 2.8A
- Max. cutting width left of blade: 8-7/8"
- Max. cutting height (resaw capacity): 3-5/8"
- Blade guides: Ball-bearing upper and lower
- Table size: 12" x 12"
- Table tilt: 0–45°
- Blade size: 61-13/16"–62-3/16" (1/8"–3/8" wide)
- Blade speed: 2460 FPM
- Dust port: 2"
- Footprint: 8-1/2" x 15-1/2"
- Overall dimensions: 21" W x 17" D x 29-1/2" H
- Approximate shipping weight: 49 lbs.
FEATURES:
- Two-year warranty!!
- Adjustable wheels for alignment/coplanarity
- Rack-and-pinion table tilt
- Ball-bearing blade guides
- Extruded aluminum rip fence with camlock handle
- 2" Dust port
- Lower wheel brush to prevent build-up of dust/pitch on wheel
- LED work light
- Carrying handle for easy portability
-
-
Out of stock
Sturdy and Secure
The Delta Power Tools 78-919BT2 Biesemeyer Fence is adjustable for fast accurate cuts time and time again. This fence system comes with a three-point locking system and comes with various features such as easy-gliding, steel tube fence body to handle quick, precision ripping and square cuts, the Delta Power Tools 78-919BT2 Biesemeyer Fence is ideal for fence attachments. -
The FEIN FMM 350QSL START kit offers the powerful FMM 350QSL MulitMaster in a soft nylon bag with a Universal 152 blade, an unperforated triangle sanding pad and three sheets of each 80, 120 and 180 grit triangle sandpaper.- Lightweight and well balanced with soft grip
- Tacho generator and electronic control ensures constant speeds
- Design Reduces vibrations by up to 70% and noise up to 50%
- Features soft start with balanced armature and ball bearings for flawless operation
- StarLock system allows for change of accessories in less than three seconds
-
The combination of a 350 Watt motor with high copper content and independent tool housing makes the FEIN MultiMaster 350QSL more powerful, lower in vibration and quieter than every other comparable tool on the market. Weighing less than four pounds, the MultiMaster is lightweight and well balanced with a soft grip for comfortable handling. The tacho generator and electronic speed control ensures constant speeds while operating under load.- Lightweight and well balanced with soft grip
- Tacho generator and electronic control ensures constant speeds
- Design reduces vibrations by up to 70% and noise up to 50%
- Features soft start with balanced armature and ball bearings for flawless operation
- StarLock system allows for change of accessories in less than three seconds
-
12" Compound Sliding Miter Saw features an amazing 13" cross cut capacity. Experience the capability to complete many woodworking projects with our powerful and dependable 15-amp motor. From its front lock control system with 10 positive miter stops to the new and improved laser cut line indicator, the S26-263L precision is top tier in its class. -
Out of stock
- Vacuum operating button locks vacuum force
- Twin leveling toggles make surface alignment easy
- Steel threaded spindle is precision machined
- cold drawn profile guide rails for smooth powerful clamping
- Ergonomic grip 2 component handle
-
Out of stock
The Bosch CLPK223-181 18V 2-Tool Kit is a package that can generate cordless power and productivity on the jobsite. This kit includes the IDH182 EC Brushless 1/4 In. and 1/2 In. Socket-Ready Impact Driver. The IDH182's Socket Ready adapter easily switches from 1/4 In. screwdriver bits to 1/2 In. sockets, for an all-in-one tool. With a rating of 1,650 In.-Lbs. of torque and up to 3,200 bpm, this two-in-one cordless workhorse uses its efficient and trouble-free EC Brushless motor to power the most powerful impact driver in its class. The Bosch DDH181X 18V Brute Tough™ 1/2 In. Drill/Driver generates a drilling speed up to 1,700 rpm and high torque, at 710 In.-Lbs. Its four-pole open-frame delivers 710 In.-Lbs. of torque, making it the most powerful drill/driver in its class. This Brute Tough™ drill can handle the toughest applications on the jobsite. This kit includes two 18V 4.0 Ah FatPack batteries and a charger, to fully capitalize on the Bosch 18V battery platform. -
Out of stock
-
Out of stock
-
SIZE MATTERS. And when it comes to a 23 Gauge Headless Pinner, a tool that drives the finest pin nail possible, having a lightweight compact tool is even more critical to achieving the precision finish and trim work you demand. Now, the Grex Cordless technology finally makes it possible to create a cordless version of this tool in a form factor that you need. The New Grex GCP650 - the first and only cordless 2" 23 Guage Headless Pinner; with NO compromise on power. Grex has engineered the first cordless 23 gauge headless pinner that is as similar in size, weight, balance and power as a traditional pneumatic 23 gauge pinner. Plus this is all achieved with the same award winning robust build quality that users have trusted for more than 20 years. -
-
-
Description
This Elliptical Jig enables the Mini Planer/Moulder to make high-quality arched casings and mouldings with the same profile normally produced when cutting straight runs of moulding. Ideal for round-top windows and arched doorways that are characteristic of fine custom woodwork. This jig requires a shop-made 3/4" thick template of the same arc or radius as the workpiece. Maximum width capacity is 51/2".Specifications
- 5-1/2" Maximum Width Capacity
- Ball Bearing Guides
- Dovetailed Bearing Block and Base
- Hardware and Instructions Included
- Designed for use with: W1812, W1739 and W1693
-
The Bosch GOP55-36C2 StarlockMax® Oscillating Multi-Tool Kit supplies a tool that features the Starlock® next-generation 3-D tool-accessory interface. This interface provides best-in-class accessory grip, which in turn generates extreme force transmission produced by the 5.5-amp motor. With more contact surface area between the tool and accessory, the Starlock interface is a cupped 3-D tool-accessory connection that delivers greater torque transfer. This tool delivers a top speed of up to 20,000 oscillations per minute, and the tool provides a wide 3.6° oscillating arc, for greater productivity in cutting, grinding, scraping and other tasks. The no-touch blade-change system makes it easy to attach, remove or reposition blades. A variable-speed dial allows the user to set the optimal speed for the task at hand, and Constant Response circuitry maintains the desired speed under load. -
Out of stock
Finally a lift is available to fit your Plunge Based Router. JessEm is proud to introduce to you our Rout-R-Lift Prestige. The Prestige allows the user to mount the base of their plunge based router motor to the carriage. Made from the same high quality products as our Mast-R-Lift II and Excel II, the Prestige offer customers another list of options for their wood shops.- Rout-R-Lift PrestigeAll screws to mount each router mentioned to the base plate 3 - Insert Rings (1-3/8", 2" and 2-1/2") 1 - Insert Wrench 1 - Lift Adjustment Handle 10 - Stainless Steel Set Screws with Blue Nylok Patch 4 - Mounting Screws
-
Out of stock Finally a lift is available to fit your Plunge Based Router. JessEm is proud to introduce to you our Rout-R-Lift Prestige. The Prestige allows the user to mount the base of their plunge based router motor to the carriage. Made from the same high quality products as our Mast-R-Lift II and Excel II, the Prestige offer customers another list of options for their wood shops.
- Rout-R-Lift PrestigeAll screws to mount each router mentioned to the base plate 3 - Insert Rings (1-3/8", 2" and 2-1/2") 1 - Insert Wrench 1 - Lift Adjustment Handle 10 - Stainless Steel Set Screws with Blue Nylok Patch 4 - Mounting Screws
-
These 28" table legs are perfect to pair with a table top.
These are very heavy duty able to withstand practically any table top you choose to use. The cast aluminum makes these table legs incredibly strong while keeping things to a manageable weight.Specification:
- Height: 28"
- Mounting width: 18"
- Widest Point: 24"
Features:
- Raised Gold Lettering
- Included Threaded Inserts and Bolts
- Cast Aluminum - Like Cast Iron but without the weight.
- Made in The USA
-
The Mast-R-Lift II has 5 double sealed bearings. The lift adds tension to the threaded spindle to remove backlash and vibration, and prevent setting changes while routing. Includes a dedicated locking mechanism for heavy duty, long term routing operations, accessible from the top of the top surface and is engaged with the same crank handle used to raise and lower the Lift. The Mast-R-Lift II also fits most fixed base routers on the market today without the use of an adaptor collar. The unique clamping blocks enable users to use different fixed base routers with the Lift as opposed to dedicating a router. All of our top plates on our Lifts are hard anodized. This is an engineered surface treatment and not just a cosmetic sulphuric treatment that will wear off. The shafts on the Mast-R-Lift II are pressed into a shaft mount with hydraulic pressure, not just threaded to the top plate. -
Out of stock
-
Out of stock
Easily and accurately attach the Delta T2 Fence System to your table saw. Along with the fence, the 36-T30 includes a steel guide tube with scale, front & rear support rails, and mounting hardware. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]- The fence clamps securely to front tube and rear rail
- Steel tube fence body glides easily to handle quick and repetitive work along with precision ripping and squaring cuts
- Projected aluminum face attaches to solid-steel angle iron and tubing
- 3-point T square locking system is accurate with 1/64 of an inch
- Added rear hold down support when using jigs and featherboards
-
In a small workshop, you need equipment that can do double duty and save you space. Whether you need a portable miter saw stand or an extra work surface, the compact PM-8000 Portacube STR is the perfect addition to your workspace.- Compact size of 31” x 29” fits in almost any workshop
- Expands to provide up to 7 feet of working surface
- Fits any miter saw up to 26.5” wide
- Adjustable tool tables raise to height of miter saw — from 2 to 4.5"
- 10” wheels easily roll Portacube around workshop
- Ideal for miter saws, bench top planers, or other power table top tools
- Fits standard width door opening
- Saw not included
-
Out of stock
- The roll-cage construction provides added protection for the pump and motor assembly during transportation, in storage, and on the job site. Additional features include a low AMP draw that reduces the incidents of tripped breakers at start-up, as well as an oil-free dual-piston pump designed for maintenance-free operation.
-
Out of stock
Use the FS 2700 Guide Rail (106 inches) with the Festool TS Plunge cut saw to make precision cuts up to 100 inches long. - Integrated splinterguard serves as cut line and prevents tear-out and splintering - A fully integrated system, use your Festool routers or jigsaw with the guide rail for expanded capability - Non-skid, dual-clamping rubber strips prevent movement during the cutting operation, saving significant set up time - Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action - SHIPS VIA FREIGHT -
Out of stock
The WST05 Jobsite Miter Saw Stand is a versatile and durable jobsite miter saw stand for a range of pro trades, wherever the job takes them. The WST05 has material support extensions that extend up to 9 ft. to support long crown molding, and folds in seconds for easy portability. The adjustable stand provides 2 height positions, 21-5/8" and 31-1/2", for increased comfort. The large solid rubber wheels provide easy jobsite portability. It has a compact design (only 46", folded) for convenient transportation to and from the jobsite, and for easy vertical or horizontal storage. The new stand is the perfect companion to a Makita miter saw for a broad range of trades including finish carpenters, professional woodworkers, case and base installers, cabinet installers, cabinet manufacturers, closet installers, decking and flooring applications, siding installers, stair installers, and general contractors seeking a best-in-class jobsite miter saw stand.Features
- Material support extensions extend up to 106-1/2" with a maximum supported weight of 220 lbs. for increased cutting efficiency
- 2-Position adjustable stand provides 21-5/8" and 31-1/2" heights for increased comfort
- Spring-loaded mechanism engineered for quick and easy jobsite set up
- Durable duty aluminum feed roller and adjustable material stop engineered for increased speed on repetitive cuts
- Compact design (46" folded) for convenient transportation to and from the job site, and easy vertical or horizontal storage
- Adjustable non-marring rubberized feet provide additional support when leveling stand on uneven surfaces
- “Tool-less” adjustable miter saw bracket holders for easier installation/removal of saw
- Portability and adjustment features are ideal for range cutting application including crown molding, baseboard, case and base, and long wood materials (miter saw not included)
- Weighs only 58 lbs.
- Fits all currently available Makita miter saws
SpecsResources & Media -
Out of stock
- POWER : Makita-built motor delivers 325 ft.lbs. of Max Torque with 2,200 IPM and 1,600 RPM
- CONVENIENCE : Rocker switch and built-in L.E.D. light
- DURABILITY : Shock absorbent handle protects battery housing for extra durability
- COMFORT : Weighs only 7.5 lbs. with battery for reduced operator fatigue
- INCLUDES : Includes - (1) 18V LXT® Lithium-Ion battery, rapid charger and tool bag
-
Sale!
-
DETAILS
- Anti-vibration system: Permanently safe, pleasant working conditions with minimum vibrations and outstanding noise damping.
- Hexagonal tool mount for outstanding torque transfer between tool and accessories.
- 450 W FEIN high-performance motor: Durable, overload-proof, high-performance motor with high proportion of copper for higher cutting speed and ultra-rapid work progress.
- Tacho generator: Constant speeds, even under load, and infinitely variable electronic speed control.
- Metal drive head: High load capacity and maximum service life, since all drive head parts are made of metal.
- Industrial cable: Large operating radius thanks to the 5 m, fine-stranded rubber-clad cable in industrial quality.
- Perfectly equipped for any job. Easily transported with our L-BOXX system.
-
-
- Full certified HEPA dust extractor unit. This unit has been tested to 99,98% capture and retention of particulate contamination down to 0,3 microns.
- High performance turbine for 151 cfm (71 l/s) flow rate and 98.4" of water lift (245 mbar vacuum).
- Low volume of 66 dB (A).
- Large range due to 19 ft [6 m] power cord and 13 ft [4 m] vacuum hose.
- Anti-static function against electrostatic charging during work – electrostatically conductive with optionally available suction hose 3 13 45 120 01 0 and tool coupling 3 13 45 300 01 0.
- Large wheels rotate 360° for optimal maneuverability, even in tight conditions.
- Tool coupling with suction control for easy control of suction power.
- Autostart outlet with power-on delay to prevent current spikes.
- Practical storage area with rim.
- Approval for dust class L.