-
Out of stock
-
Out of stock
Description
Numeric control pad and digital readout provide the ultimate in precision. Other features include quick-change belt system with automatic belt tensioning, air-controlled automatic belt tracking system, motorized table elevation control, adjustable air-controlled belt oscillation system, and load meter. Certified to CSA and UL standards.Specifications
- Sanding motor: 10 HP, 220V, single-phase, 1725 RPM, 50A
- Feed motor: 1 HP, 220V, single-phase, 1725 RPM, 7A
- Elevation motor: 1/3 HP, 220V, single-phase, 1725 RPM, 3A
- Drum speed: 3550 FPM
- Drum diameter: 8"
- Feed rate: variable, 15–49 FPM
- Max. stock width: 24"
- Max. stock thickness: 6"
- Min. stock thickness: 1/8"
- Required air pressure: 75 PSI @ 7 CFM
- Sanding belt size: 25" x 60"
- Dust port: (2) 4"
- Emergency stop bar with brake
- Manual and motorized table elevation control
- Sanding load meter
- Digital readout and controls
- Made in an ISO 9001 factory
- Footprint: 39-1/4"W x 19-1/4"D
- Height with dust ports: 71"
- CSA certified meeting CSA C22.2 #105–1953 and UL 987–7 standards
- Approximate shipping weight: 1870 lbs.
California Proposition 65 Warning
-
G0603X 25" 15 HP 3-Phase Extreme Duty Planer w/ Helical Cutterhead
Precision planing with digital control.
The G0603X 25" 3-Phase Extreme Duty Planer has an incredible 15 HP motor to make quick work of those big planing jobs. The G0603X features a unique helical cutterhead with 170 inserts rotated at 15° for smooth shearing cuts - meaning you can say goodbye to tear-out - while having an ultra-quiet machine and a smoother finish. The digital controls to allow you to simply enter the thickness of the board you want or the amount you want to remove, which saves time and reduces waste. All controls are conveniently located. The segmented chip breaker leads directly into the dust hood with a 5” dust port to help ensure the work area stays as clear as possible. And because it's a Grizzly Extreme Series®, you can be assured that your machine will provide years of reliable service. Like all Grizzly planers, the G0603X comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0603X manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the planer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS:- Cutterhead motor: 15 HP, 220V/440V*, 3-phase, 37A/18.5A
- Table elevation motor: 1/2 HP, TEFC, 2.4A/1.2A
- Table size: 25" W x 57" L
- Maximum cutting width: 25"
- Maximum stock thickness: 9"
- Maximum cutting depth: 1/4"
- Minimum stock thickness: 1/4"
- Minimum stock length: 10"
- Feed rate: 20, 25 & 30 FPM
- Cutterhead: 6-row helical, 170 inserts
- Cutterhead speed: 4900 RPM
- Power transfer: Triple V-belt
- Overall size with infeed/outfeed tables: 60-1/4"H x 57-3/8"W x 54-3/8"D
- Approximate shipping weight: 2054 lbs.
- Segmented chip breaker
- Precision-ground cast-iron table
- 5" dust port
- Micro-adjustable table height
- Infeed roller is serrated steel
- Outfeed roller is finely finished steel
- Digitally controlled table elevation for extreme accuracy
- Adjustable bed rollers
- Easy access cutterhead
- 3-Speed (20,25,30) feed Rate
- Inch/metric readout
- Emergency stop button*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $250. Please contact Grizzly Technical Support at (570)546-9663 before placing your order.
-
Out of stock
The Grizzly Industrial G0445-24" 10 HP 3-Phase Platen Type Wide-Belt Sander machine was developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. The main features that enable it to process short pieces efficiently are the single drum and the double infeed and double outfeed pressure rollers that are tucked in closer to the drum. The result is that you have continuous downward pressure on extremely thin stock as short as 14" (G0582). That is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of harder rubber to prevent distortion of thin stock while sanding. The new platen model will sand stock as short as 9" (G0445). All of these models include features like digital read out, powered table elevation, four screw jacks for table support, variable speed, disc brake stopping system, dust proof photo electric eye/pneumatic control for belt oscillation, and separate motors for the drum, the feed rollers, and the table elevation. -
Out of stock
FEATURES: • Dual mitering allows for compound angle cutting of 60° right and 45° left • Tungsten carbide blade guides with precision bearings, stabilizes the blade for increased accuracy and extendes blade life • Large handwheel with blade tensioning gauge acurately measures blade pressure • For added safety, the EHB-1018VM Bandsaw follows strict guidelines and electrical requirements to be certified by CSA Group • Quick positioning vise for clamping of materials • The Elite swing away panel relocates saw controls to a single location, offering finger-tip operation of most major saw functions. • Semi-automatic bow raises after cut to predetermined height • Automatic blade breakage sensor detects accidental breakage and interrupts the power • Heavy-duty construction reduces vibration and deflection • Blade is fully guarded for operators safety -
Out of stock
Built with a 2 hp motor, hydraulically controlled back roll, and a steel frame, this electrical plate roller lets you tackle thicker gauges without getting bogged down. It comes with a DRO.- 4’ forming width.
- Bends 13 gauge mild steel over its whole width.
- 2 hp motor runs on 220-volt single-phase power, so you can use it almost anywhere.
- Convenient control pedestal has forward and reverse foot pedals and buttons to control the up and down movement of the back roll.
- Industrial-grade hydraulic system allows the back roll to move up and down and tilt left and right for coning.
- Digital readout gives the position of the back roll for easy repeatability.
- Full steel frame, machined to exacting tolerances, maintains accuracy for many years of use at full capacity.
- Includes 3 wire grooves for forming rings.
- Emergency stop cable on the front and back of the machine for safety.
-
Out of stock
Vertical Band Saw Voltage 230 2 HP 50 to 5000 sfpm Speeds Max Thickness of Cut 20 In. Max Blade Length 151-1/2 In. Corded Max Blade Width 1 In. Blade Thickness 0.025 In. Overall Height 77-1/2 In. Overall Width 29 In. Overall Depth 40 In. Cutting Angle 10 Degrees Left and 45 Degrees Right 1725 RPM 3 Phase 60 Hz Features Variable Speed Drivetrain Allows Operators to Fine Tune The Blade Speed Fast and Easily Table Dimensions 24 in x 22 In. Application Metal -
Out of stock
Elite Vertical Bandsaws are the perfect blend of power and balance. Featuring variable speed drivetrains with precision balanced cast-iron blade wheels with a bonded rubber blade track, precision ground articulating table, 4.2 KVA Bi-Metal Blade stations, and CSA / CUS Certification make Elite vertical bandsaws the choice for precision sawing of ferrous and non-ferrous materials. -
Out of stock
Stock Number 311440 Compound Slide Travel (In.) 3-1/2 Cross Slide Travel (In.) 7 Distance Between Centers (In.) 40 Drive EVS Gross Weight (Lbs) 1584 Input Power 230V 3ph Length of Gap (In.) 9-1/2 Max Tool Size (In.) 3/4 x 3/4 Motor (HP) 3 HP, 230V, 3-Phase Motor Phase 3 Motor Power (HP) 3 Motor Voltage (V.) 230 Net Weight (Lbs.) 1320 Number of Inch Threads 34.0000 Number of Longitudinal and Cross Feed Rates 25 Number of Metric Threads 34.0000 Number of Spindle Speeds Variable Overall Dimensions (L x W x H) (In.) 68.5 x 28.3 x 50 Prewired Voltage (V.) 230 Prop 65 Cancer and Reproductive Harm Range of Cross Feeds (IPR) 25 Range of Inch Threads (TPI) 2-56 Range of Longitudinal Feeds (IPR) 0.0016-0.0460 Range of Metric Threads 0.5-12 Range of Spindle Speeds (RPM) 40-2000 Shipping Dimensions (L x W x H) (In.) 76 x 30 x 61 Spindle Bore (In.) 1-1/2 Spindle Mount D1-4 Spindle Taper Morse #5 Spindle Taper with Sleeve MT-5 Spindle Thread (In./TPI) 2 - 56 Steady Rest Capacity (In.) 0.23-0.61 Copper Shaft ( Standard) 0.20-2.36 Bearing Roller(OP) Swing Over Bed (In.) 14 Swing Over Cross Slide (In.) 9-1/16 Tailstock Spindle Travel (In.) 6-1/8 Taper in Tailstock Spindle MT-3 Weight (Lbs.) 1584 Width of Bed (In.) 7.48 -
Out of stock
Door builders and cabinet shops will love the extra capacity of this 37" wide-belt sander. With a 15 HP 3-phase sanding motor, this wide-belt is built for daily industrial use with features such as a heavy-duty steel cabinet, pneumatic belt oscillation, and a built-in air filter/regulator. The digital control pad automates table adjustments and is accurate to 0.005". Also, the variable-speed conveyor, adjustable oscillation controls, and adjustable graphite/felt platen easily allow the operator to find the perfect combination of settings to achieve soft, smooth finishes on all types of wood. Made in an ISO 9001 Factory CSA certified meeting CSA C22.2 #105-1953 and UL 987-7th standards! Specifications- Sanding motor: 15 HP, 220V/440V*, 3-phase, 36A/18A, 1725 RPM
- Conveyor motor: 1 HP, 220V/440V*, 3-phase, 3.4A/1.7A
- Table elevation motor: 1/4 HP, 220V/440V*, 3-phase, 1.2A/0.6A, 1725 RPM
- Max. board width: 36-1/2"
- Max. board thickness: 6"
- Min. board length: 14"
- Air requirements: 75 PSI
- Surface speed of drums: 2565 FPM
- Conveyor feed rate: Variable, 15-49 FPM
- Built-in air filter/regulator
- Independent motor control
- Pneumatic belt tracking and tensioning
- Digital sanding load meter
- Emergency stop bar
- Digital readout and control panel
- Three 4" dust ports
- Steel cabinet
- Steel outfeed drum
- Rubber infeed drum
- Rubber pressure rollers
- Micro-adjustable graphite/felt platen
- CSA certified meeting CSA C22.2 #105-1953 and UL 987-7 standards
- Overall size: 52-1/8"W x 69-5/8"H x 49-3/8"D
- Approximate shipping weight: 1800 lbs.
- *440V operation requires purchase of additional components
-
This industrial bandsaw is huge, great attention has been given to the fine points that make it easy to use and performance perfection. The tilt mechanism is manufactured from two pieces of solid cast iron that slide within each other in a dovetail system. There is an ergonomically designed foot brake that shuts the motor off automatically, and easy blade change make operating this bandsaw a joy. -
Out of stock
This box brake’s welded steel frame allows for a large capacity—without the twisting you’ll get from many competing metal brakes. The BB-14418 will provide years of trouble-free use.- 18 gauge mild steel and 22 gauge stainless steel maximum capacity.
- Bends sheet metal across its entire 12-foot (144”) length.
- 135° maximum bend angle.
- Includes 31 interchangeable fingers of varying lengths (6 fingers of 3", 6 of 4", 10 of 5", 9 of 6" ).
- You can make just about any size box or pan imaginable up to a 6” box depth.
- 2 large counterweights help the operator bend at full length and capacity without straining.
- Electro-welded steel construction enables this sheet metal brake to handle its maximum capacity while maintaining accuracy.
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com