-
Out of stock
-
Includes 1 Brush & Caster Set SuperMax Tools offers a wide variety of SuperBrush™ sanders to meet the many needs of any woodworking shop. Our goal is to provide an excellent priced machine yielding an incredible return on investment by creating faster output, reduced rework, and greater product consistency. Just think of all the applications our machines can help with – here a just a few: • Raw Wood Sanding | White Wood Sanding • Break sharp edges • Blend out minor defects • Sealer Sanding | Primer Sanding | Scuff Sanding • Profile sanding • Clean reclaimed wood • Wire brushing to pull out soft grain to create textured surface These easy to use machines come with an extremely low learning curve and offer many different features which include: quick change brush heads, infinitely variable brush and conveyor speeds to allow for endless finish possibilities, adjustable tension rollers to prevent stock slippage, and precision height adjustments. Our SuperBrush™ sanders come in sizes ranging from 24” to 49” with single and/or double brush head offerings to meet all your finishing needs.Dozens of brush heads available to effectively sand a wide variety of applications.- Raw Wood Sanding | White Wood Sanding
- Break sharp edges
- Open grain for even finish absorption
- Blend out minor defects
- Sealer Sanding | Primer Sanding | Scuff Sanding
- Removes raised fibers and grain (denib/defuzz)
- Degloss previously finished wood
- Clean reclaimed wood
- Wire brushing
- Distress (weathered/Southwest finish)
- Pull out soft grain to create textured surface
- Raw Wood Sanding | White Wood Sanding
-
Out of stock
The Jet Vertical Milling Machine is a small mill with all the features found on larger mills but sized for home shops, repair shops, and small maintenance shops. Powered by a 1.5 HP 115/230-volt motor, this milling machine offers 5 spindle speeds ranging from 240 to 1,150 RPM, has a collet capacity of 1/8 to 7/8 inches, and offers a generous 10-1/2 inches of front to back ram travel. This tool features a precision-bored and honed machine head, high-precision spindle bearings, and a chrome-finished, large-diameter quill. Designed with precision-ground dovetail ways and a precision-ground, hardened table, this milling machine also has satin-chrome finished dials and adjustable gibs throughout. The head conveniently tilts left or right, with a graduated scale on the column. This vertical machine locks on all movable surfaces, and can handle a work piece up to 500 pounds. This tool includes a one-shot lubrication system, way covers, a draw bar, and a tool box with tools for easy maintenance. -
Out of stock
The unique design of the JET 10 by 16-inch horizontal mitering bandsaw (model J-7020M / 414474) features a swiveling head while the base remains stationary. This allows the stock to remain same position while making accurate crosscuts and miters. Designed to handle a variety of jobs, it's ideally suited for tool rooms, maintenance, machine and fabrication shops as well as light production applications. -
Out of stock
This 6-foot box brake offers a happy medium between our 4-foot BB-4812 and our 8-foot BB-9612. With a welded steel frame, the BB-7212 offers years of hassle-free productivity.- Bends 12 gauge mild steel over its full 6-foot (72”) length.
- Maximum bend angle of 135°.
- 2 counterbalance weights make it easy to bend at maximum capacity and reduce operator strain.
- Electro-welded and truss-supported steel frame prevents distortion or twisting and produces high-quality bends.
- Comes standard with 17 hardened fingers of varying sizes (6 fingers of 3", 3 of 4", 6 of 5", and 2 of 6") .
- 3-piece finger design allows for a 6” box depth.
- You can set up a long straight brake or a segmented one for boxes or pans.
- Heavy-duty steel floor stand puts the beam at optimal working height.
-
Out of stock
For master craftsmen who strive for perfection with each project, the Powermatic CNC line is the premium choice. Providing unrivaled design, these machines deliver the eloquent tone of confidence needed to provoke one's imagination to endless possibilities. This is the CNC machine for the true craftsman -
Ironworker Max Force (Tons) 40 Oil Capacity (Gal.) 7 Speed (Strokes/Minute) 23 5 Motor HP Hydraulic Pressure (PSI) 2750 Voltage 230 1 Phase 23 Amps Punching Station Pedestal Die Table 10 in Wide Flat Bar Shear Angle Shear Universal Open Tooling Station Metalworking -
Out of stock
Includes 1 Brush & Caster Set SuperMax Tools offers a wide variety of SuperBrush™ sanders to meet the many needs of any woodworking shop. Our goal is to provide an excellent priced machine yielding an incredible return on investment by creating faster output, reduced rework, and greater product consistency. Just think of all the applications our machines can help with – here a just a few: • Raw Wood Sanding | White Wood Sanding • Break sharp edges • Blend out minor defects • Sealer Sanding | Primer Sanding | Scuff Sanding • Profile sanding • Clean reclaimed wood • Wire brushing to pull out soft grain to create textured surface These easy to use machines come with an extremely low learning curve and offer many different features which include: quick change brush heads, infinitely variable brush and conveyor speeds to allow for endless finish possibilities, adjustable tension rollers to prevent stock slippage, and precision height adjustments. Our SuperBrush™ sanders come in sizes ranging from 24” to 49” with single and/or double brush head offerings to meet all your finishing needs.Dozens of brush heads available to effectively sand a wide variety of applications.- Raw Wood Sanding | White Wood Sanding
- Break sharp edges
- Open grain for even finish absorption
- Blend out minor defects
- Sealer Sanding | Primer Sanding | Scuff Sanding
- Removes raised fibers and grain (denib/defuzz)
- Degloss previously finished wood
- Clean reclaimed wood
- Wire brushing
- Distress (weathered/Southwest finish)
- Pull out soft grain to create textured surface
- Raw Wood Sanding | White Wood Sanding
-
Out of stock
Includes 1 Brush, Caster Set & DRO SuperMax Tools offers a wide variety of SuperBrush™ sanders to meet the many needs of any woodworking shop. Our goal is to provide an excellent priced machine yielding an incredible return on investment by creating faster output, reduced rework, and greater product consistency. Just think of all the applications our machines can help with – here a just a few: • Raw Wood Sanding | White Wood Sanding • Break sharp edges • Blend out minor defects • Sealer Sanding | Primer Sanding | Scuff Sanding • Profile sanding • Clean reclaimed wood • Wire brushing to pull out soft grain to create textured surface These easy to use machines come with an extremely low learning curve and offer many different features which include: quick change brush heads, infinitely variable brush and conveyor speeds to allow for endless finish possibilities, adjustable tension rollers to prevent stock slippage, and precision height adjustments. Our SuperBrush™ sanders come in sizes ranging from 24” to 49” with single and/or double brush head offerings to meet all your finishing needs.Dozens of brush heads available to effectively sand a wide variety of applications.- Raw Wood Sanding | White Wood Sanding
- Break sharp edges
- Open grain for even finish absorption
- Blend out minor defects
- Sealer Sanding | Primer Sanding | Scuff Sanding
- Removes raised fibers and grain (denib/defuzz)
- Degloss previously finished wood
- Clean reclaimed wood
- Wire brushing
- Distress (weathered/Southwest finish)
- Pull out soft grain to create textured surface
- Raw Wood Sanding | White Wood Sanding
-
Out of stock
This 1,300-pound heavy duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives, and has a 5” dust port for easy attachment to any dust collection system. The cutterhead is a helical design with 125 four sided knife inserts – these produce a superior finish and much quieter operation compared to conventional cutterheads, and the inserts are installed without further adjustments. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. Infeed and outfeed rollers are fitted with roller bearings for long life. The sectional infeed roller and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed rollers facilitate both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. The massive, ribbed cast iron table is ground finished and rises smoothly via the hand wheel. With a hefty 7-1/2 horsepower motor, the 201HH Planer is perfect for the small to medium shop with continuous planing requirements. Product Listing with Warranty Period90 Days – Parts; Consumable items 1 Year – Motors, Machine Accessories 2 Year – Woodworking Machinery used for industrial or commercial purposes 5 Year – Woodworking Machinery -
Out of stock This 1,300-pound heavy duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives, and has a 5” dust port for easy attachment to any dust collection system. The cutterhead is a helical design with 125 four sided knife inserts – these produce a superior finish and much quieter operation compared to conventional cutterheads, and the inserts are installed without further adjustments. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. Infeed and outfeed rollers are fitted with roller bearings for long life. The sectional infeed roller and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed rollers facilitate both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. The massive, ribbed cast iron table is ground finished and rises smoothly via the hand wheel. With a hefty 7-1/2 horsepower motor, the 201HH Planer is perfect for the small to medium shop with continuous planing requirements. Product Listing with Warranty Period90 Days – Parts; Consumable items 1 Year – Motors, Machine Accessories 2 Year – Woodworking Machinery used for industrial or commercial purposes 5 Year – Woodworking Machinery
-
Out of stock
This box brake can bend metal along its 10-foot width without twisting. You can bend 4 x 8 sheets at 45°, perfect for adding a stiffening rib to support long duct pieces.- Maximum capacity of 14 gauge mild steel and 18 gauge stainless steel.
- 10-foot (120”) length enables your shop to take on a wide range of projects.
- Bends up to 135°.
- Heavy-duty truss rods support the apron to reduce flex on maximum capacity bends.
- Electro-welded all-steel framework keeps this metal brake accurate over decades of daily use at full capacity.
- 26 fingers of varying sizes (6 fingers of 3", 4 of 4", 10 of 5", 6 of 6") allow you to bend boxes and pans up to 6” deep.
- You can set up the individual hardened fingers for straight bending or box and pan configurations.
- Apron shafts ride in precise oilable bearings, maintaining tight bend tolerances and minimizing operator fatigue.
- 2 massive counterweights make it easy to bend at maximum capacity and reduce physical strain.
- Massively-built sheet metal finger brake weighs in at almost 3500 lbs.
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com