Makita is meeting demand with an expanding line of cordless OPE that includes the 18V X2 LXT Lithium-Ion (36V) Brushless Blower. With zero emissions and lower noise, the 18V X2 (36V) Cordless Blower is a welcome solution for clean-up applications. It’s powered by two 18V LXT batteries (included) for maximum power and run time, but without leaving the 18V battery platform. With the efficient Makita BL brushless motor, the blower delivers longer run time, increased power and speed, and longer tool life. Model XBU02PTX1 is a kit and includes the Blower, two fast-charging 18V LXT Lithium-Ion5.0Ah batteries and an efficient 18V Dual Port Rapid Optimum Charger, as well as an 18V LXT Brushless 4-1/2" Paddle Switch Angle Grinder that is engineered for corded grinding performance without the cord. Makita’s efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per battery charge than similar non-brushless tools.
-
Out of stock
-
Out of stock
- Bi-metal E-cut Blade for SuperCut only
- For wood, plastic, aluminum, copper, and sheet metal up to 18 gage
-
The Fein BLK 1.3CSE 18 Gauge Nibbler makes fast, precise cuts in up to 18-gauge corrugated sheet metal. Suitable for roofing, facade construction, metal construction, and other metal building applications, the Fein nibbler cuts effectively across curves and around outlet boxes and other cut-outs. Lightweight and easy to handle and hold, the Fein BLK 1.3CSE 18 Gauge Nibbler allows tool-free changes of punch, die, and cutting direction and includes a 16-1/2 foot electric power cable.- Rotating punch - increases the punch life by 30% against fixed punch systems
- High cutting speed - 7½ ft/min
- Tool-free change of punch, die and cutting direction
- Cutting direction adjustable in steps of 45°
- 16 3/8 ft. Electric Power Cable
-
Out of stock
Phenolic is one of the strongest, most stable and durable materials available for an industrial strength work surface. Phenolic is the material of choice for woodworking pros and virtually renders melamine an obsolete option for long term professional use.- 3/4" thick phenolic material will not warp, sag, swell or corrode
- 32" wide router table top is 24" front to back with a centered router opening
- Rabbeted 9-1/4" x 11-3/4" opening supports most standard router plates and lifts
- Extruded aluminum track with 1/4" T-slot and standard 3/4" miter slot
- Underside pre-drilled for JessEm router table fences and steel router table stand
-
Out of stock
- Includes JessEm Rout-R-Lift II for 3-1/2"-diameter router motors
- 32" x 24" phenolic table with aluminum extruded miter track
- Mast-R-Fence II router table fence with fully adjustable fence faces
- Fence position maintained by side mounted adjustable fence tracks
- Rigid, heavy-duty steel stand with upper and lower stretchers
-
Out of stock
With the HTC3000 adjustable mobile base, it's never been easier to move equipment around a crowded shop. This fully adjustable mobile base features side rails and corner pieces with holes spaced every inch to insure the perfect fit for your machine. Move bandsaws, table saws, sanders, drill presses, jointers, planers, and much more. You'll be able to open up space for more effective productivity, better organization and safety, and added convenience during cleanup. The base is sturdy and easy to assemble, plus it adjusts to fit virtually any large woodworking machine, forming squares from 14 by 14 inches to 36 by 36 inches and rectangles as big as 22 by 54 inches. Holes at 1-inch increments let you choose any shape in between, and 3-inch diameter wheels at all four corners make it easy to maneuver. Roll one tool in; roll another tool out. The large, industrial-grade foot-operated levers lock machines to the floor, and their increased lever length makes moving heavier machines a breeze. The base also features a durable powder-coated finish. The HTC-3000 has a maximum weight capacity of 700 pounds. All parts are included, and it's backed by a limited lifetime warranty -
Out of stock
4/2020 Latest version -
-
Out of stock
If used with a 5 gallon bucket, the bucket must be a minimum of 90 mils thick (0.09") or else it may collapse under vacuum pressure. Big box store buckets are not thick enough for use with the Dust Deputy.
* Not for use in positive-pressure applications i.e. when connected to a blower instead of a vacuum. A container with a locking lid (such as our 10-gallon kit) is recommended instead.
-
-
Out of stock
[fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]- 180 Angle LOCK Indexing Stops with 1-Degree Step Spacing and Special Stops at ±22-1/2-Degree
- Patented Glide LOCK Miter Bar Expansion Disks Provide a Perfect Fit
- Heavy Duty Machined and Laser Cut Components. Patented Incremental Flip Shop Stop for Prefect Cut Length Control
- 1/10th-Degree Vernier Cursor, Telescoping Fence Expands from 18-Inch to 31-Inch Overall Length
- Removable Retaining Clip for T-Slot Miter Channels
-
Out of stock
Features:- Unique roller system holds down workpiece and pushes into fence for precision stock feed
- 1-1/2" urethane one-way rollers set at 5° toward fence and 2-3/4" total adjustment
- Maximum stock thickness from router table surface to 9/16" below center of T-slot
- Compatible with most router table fences with a horizontal 1/4" T-slot above the fence faces
- Includes one infeed stock guide, one outfeed stock guide and detailed instructions