- 10 gauge mild steel sheet metal maximum capacity.
- Bends across its full 8-foot (96”) working width.
- 1” beam adjustment.
- Maximum bend angle of 135°.
- Industrial-grade hydraulics will make precise and efficient bends, day in, day out, for decades.
- 5 hp motor runs on 220-volt 3 phase power.
- Hydraulic system clamps the material via dual hydraulic motors, then lifts the bending leaf with industrial hydraulic cylinders.
- Adjustable bend auto-stop simplifies production runs; just dial in your desired degree.
- Foot pedal and toggle joystick controls let you operate this hydraulic sheet metal brake in manual or semi-automatic mode.
- Includes 22 hardened 3-piece fingers (6 of 3", 4 of 4", 10 of 5" and 2 of 6" ) to create many different size boxes.
- 6” box depth maximum.
- Fully-welded steel beam and bending leaf, supported with truss rods, prevent twisting and deflection—important when you’re bending heavy 10 gauge mild steel.
- Baileigh covers this hydraulic box and pan brake with a 1-year parts warranty.
-
Uncategorized (255)
-
3M (25)
-
Bessey (19)
-
Bora (12)
-
Delta (75)
-
Forming & Shaping (1)
-
Freud (45)
-
Generac (1)
-
Generator (1)
-
Granberg Alaskan Mills (1)
-
Grex (5)
-
Lathes (1)
-
Makita (7)
-
Measuring Hand Tools (8)
-
Milwaukee (3)
-
Oneida (29)
-
Planers (1)
-
Power & Hand Tools (1)
-
Rikon (40)
-
Sawzall (3)
-
Senco (1)
-
Sheet Metal Brakes, Rolls & Shears (19)
-
South Bend (12)
-
Starret (1)
-
Table Saw (5)
-
Table Saws (1)
-
Tapes and Treads (1)
-
Tormek (8)
-
Triton (14)
-
Vogelzang (1)
-
Woodstock (2)
-
Abrasives (86)
-
Accessories (102)
-
Brands (794)
-
Featured Items (39)
-
Hand Tools (54)
-
Hardware (2)
-
Measuring Tools (78)
-
Paint / Stains / Coatings (7)
-
Power Tools (224)
-
Wood (105)
-
Out of stock
The BB-9610H hydraulic sheet metal brake adjusts to fit the gauge you’re bending and produces uniform bends. -
Out of stock
The POWERMATIC 43-Inch wide belt sander delivers the utmost performance in measurement and sanding, creating a flawless finish every time. The sander has centralized controls which allow the user to access all the needed buttons on one simple panel for more convenience.- Centralized controls allow you to access all the needed buttons on one simple panel
- The auto thicknesses will capture the piece of wood to give the user the exact starting thickness
- The variable speed feed belt allows you to accurately dial in the exact feed speed to best suit your project
- Digital readout will show the user the exact thickness of the finished piece, or will allow you to preset exactly the thickness you prefer for the finished piece
- The disc brake slows the machine quickly and will activate immediately to stop machine in an emergency
-
Out of stock
Features:
- Pneumatic Belt Tensioning
- Digital Readout and Elevation Controls Accurate to 0.005"
- Powered Table Elevation with Keypad for Typing/Storing Exact Measurements
- Industrial Rubber Conveyor Belt
- Micro-Adjustable Graphite/Felt Platen (Rear Drum)
- Variable Feed Speeds
- Disc Brake for Emergency Stops
- Independent Motor Controls for Sanding Drums, Table Elevation and Conveyor
-
Out of stock
The Powermatic WB-37 Sander delivers the best performance in measurement and sanding, creating a flawless finish every time. Specially designed to deliver precise sanding in the busy shop environment, it features centralized controls for easier, safer operation and a built-in air-supply connection with its own regulator and filter for quick installation.- Centralized controls allow you to access all the needed buttons on one simple panel
- The auto thicknesser will capture the piece of wood to give the user the exact starting thickness
-
SuperMax Tools offers a wide variety of SuperBrush™ sanders to meet the many needs of any woodworking shop. Our goal is to provide an excellent priced machine yielding an incredible return on investment by creating faster output, reduced rework, and greater product consistency. Just think of all the applications our machines can help with – here a just a few: • Raw Wood Sanding | White Wood Sanding • Break sharp edges • Blend out minor defects • Sealer Sanding | Primer Sanding | Scuff Sanding • Profile sanding • Clean reclaimed wood • Wire brushing to pull out soft grain to create textured surface. These easy to use machines come with an extremely low learning curve and offer many different features which include: quick change brush heads, infinitely variable brush and conveyor speeds to allow for endless finish possibilities, adjustable tension rollers to prevent stock slippage, and precision height adjustments. Our SuperBrush™ sanders come in sizes ranging from 24” to 49” with single and/or double brush head offerings to meet all your finishing needs.Dozens of brush heads available to effectively sand a wide variety of applications.- Raw Wood Sanding | White Wood Sanding
- Break sharp edges
- Open grain for even finish absorption
- Blend out minor defects
- Sealer Sanding | Primer Sanding | Scuff Sanding
- Removes raised fibers and grain (denib/defuzz)
- Degloss previously finished wood
- Clean reclaimed wood
- Wire brushing
- Distress (weathered/Southwest finish)
- Pull out soft grain to create textured surface
- Raw Wood Sanding | White Wood Sanding
-
Out of stock
The BB-9612H hydraulic box and pan brake can bend 12 gauge mild steel (or lighter) across its full 8-foot (96”) width.- 135° maximum bend angle.
- Comes standard with 22 fingers (6 fingers of 3”, 4 of 4”, 10 of 5”, and 2 of 6”) that you can adjust to make different sizes of boxes and pans.
- Powerful industrial-grade hydraulics lift the leaf and lift or clamp the beam.
- You can run this hydraulic sheet metal brake in manual or semi-automatic mode via toggle or foot pedal controls.
- Adjustable bend auto-stop, for easy and exact repeatability, makes this a very production-oriented hydraulic sheet metal brake.
- Apron angle bar detaches to let you get closer between bends.
- Electro-welded beam and leaf, stabilized with truss rods, minimizes deflection when you’re bending at full capacity and keeps bends crisp and accurate.
- Covered by a 1-year parts warranty.
- We typically keep replacement parts in stock for fast deliveries.
- Includes lifetime technical support by phone. Call up our knowledgeable team of reps whenever you need project advice or help related to this sheet metal finger brake.
-
Out of stock
This finger brake can bend 10 gauge mild steel across its 48” (4-foot) length. A welded steel frame prevents misalignment and ensures accuracy.- Runs on 220-volt 3-phase power.
- Powerful 3 hp motor controls all the hydraulic functions.
- 1” beam adjustment.
- Maximum bend angle of 135°.
- Includes 11 fingers (3 fingers of 3”, 2 of 4”, 5 of 5”, 1 of 6”), allowing you to adjust for different size boxes and pans you want to make.
- Industrial-grade hydraulics lift the leaf for clean, precise motion.
- Adjustable bend auto-stop makes it easy to produce repeatable bends.
- Removable bending support lets you get closer between bends.
- Fully-welded beam and bending leaf, stabilized with truss rods, minimizes any deflection when bending at full capacity.
- You can operate this hydraulic brake in manual or semi-automatic mode.
- Hydraulic motor turns a cam to lift and clamp the beam when bending 10 gauge mild steel.
- Baileigh backs this hydraulic box and pan brake with a 1-year parts warranty.
-
Out of stock
Jet dual mitering horizontal band saws unique design head dual miters both left and right for Quick angle cuts. The frequency inverter, unique to this saw, allows this EVS saw a full range of blade speeds. -
Out of stock
The SLR12 Straight line rip saw has every job covered. Powered by a 15 HP main motor, this saw has the capacity for virtually any job. The 12-Inch main blade mounts on a high alloy, heat treated arbor that is precision ground and dynamically balanced for maximum stability and long durability.- Full cast iron construction for rock-solid operation
- 15 HP Main Motor, 2 HP Feed Motor for large production capacity
- Auto-oiler with shut off, ensures long conveyor chain life
- Seven pressure rollers with dual anti-kickback devices help prevent stock discharge
- Variable feed speeds to accommodate different type stock
-
Out of stock
The POWERMATIC® WP2510 Planer has a solid steel helical cutterhead with four-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting up table heights is quick and easy. The frame is machined from heavy cast iron and has extra wide side panels that offer rigid bed support and ensure accurate alignment. The planer's segmented, serrated infeed roll with segmented chip breakers has an independent yield of 1/4. Its automatically adjusting, chain drive gear box powers the 3" diameter infeed rollers, solid pressure bar and dual outfeed rollers for precise feeding of stock. The 3-speed feed selector gives woodworkers flexibility by changing feed rates quickly and easily. The WP2510 Planer has a large 32-3/16" x 26" precision-ground table which contains two adjustable table rollers for smooth feeding of uneven stock. The planer has a Quick-Set micro-adjustable lever that easily raises and lowers the table rollers from 0 to 0.05". The hood features a built-in 5" diameter dust chute. 1547399 -
Out of stock
Designed for fast, consistent, low-effort production, this 25” industrial planer lets you set the bed height through a programmable logic controller. No more turning a handwheel to find your thickness!-
-
- 10 hp motor has enough muscle to smooth full 25” boards.
- Spiral cutter head (included) spins at 5,000 rpm.
- Rows of rotatable carbide blades make the spiral cutter head last much longer and work more quietly than a straight-knife cutter.
- Runs on 220-volt single-phase power, so you can use this sophisticated machine in almost any shop.
- Can smooth off up to .25” of material at one time.
- Variable speed from 20 to 30 feet per minute, so you can finetune to get the exact speed you need for your material and finish.
- 25” x 32” main cast iron table expands to an even larger 25” x 57”, supporting your material and helping you create straight, smooth boards.
- Programmable controller makes it simple to set the height. Just enter what you want, and the bed automatically moves to that setting.
- Controller includes automatic backlash compensation to produce exact, repeatable thicknesses.
- Segmented steel infeed roll allows you to smooth multiple boards with different heights at once, increasing your productivity.
- Durable dual steel outfeed roll moves boards along to the cutting head.
- You can set the quick-adjust bed rolls high to reduce friction on rough-sawn stock, or adjust them lower for straighter, smoother results.
- Segmented chip breaker prevents large chips or strips of wood from clogging up the machine or your dust collector.
- Solid iron pressure bar applies even force across the boards to avoid chipping.
- Anti-kickback fingers grip the material so it’s less like to shoot back out if there’s a problem at the cutter head.
- Oversized bearing housings ensure quiet performance and long life.
-
- .
-
-
Out of stock
This machine’s 13-foot length lets you bend unusual shapes from 4 x 8 sheet of metal with room to spare, even on corner-to-corner bending.- Maximum capacity of 22 gauge mild steel.
- Over 13-foot (157”) overall bend length.
- Bend angle of up to 135°.
- You can set up the fingers to do multiple bends along the length of the brake.
- 33 interchangeable fingers of varying lengths (6 fingers of 3", 6 of 4", 10 of 5", 11 of 6") allow you to make just about any size box or pan up to a 6” box depth.
- Fully-welded heavy steel framework enables this metal finger brake to handle its full capacity, day in, day out, for years—without twisting or distortion.
- 2 large counterweights minimize physical strain and help the operator easily bend at full length.
-
Out of stock
The JET JTM-4VS-1 Mill with 3-Axis ACU-RITE VUE DRO (Knee) with X-Axis powerfeed is a variable speed milling machine with a 3-Axis digital readout, with the third Axis on the Knee provides computer assisted precision. The powerfeed provides easier movement and better repeatability. JET mills deliver performance and precision and are backed by an industry leading 2-year warranty. -
Out of stock
The PR-514 is the perfect plate roll for small and medium applications. It comes standard with time-saving features, like a DRO, foot pedal controls, and an additional hydraulic motor.- 5' working width.
- 14 gauge mild steel capacity across its full width.
- 2 hp 220-volt single-phase motor transfers power directly to the driven rolls.
- Second hydraulic motor controls the movement of the back roll.
- Remote control pedestal includes foot pedal controls and the buttons for advancing or retracting the back roll position.
- Digital readout displays back roll position so you can repeat bends easily.
- DRO is positioned at the head of the machine, giving you a good line of sight no matter where you’re standing.
- Rigid steel frame, machined to exacting tolerances, helps prevent deflection.
-
Out of stock
The POWERMATIC 25-Inch wide belt sander delivers the utmost performance in measurement and sanding, creating a flawless finish every time. The sander has centralized controls which allow the user to access all the needed buttons on one simple panel for more convenience.- Centralized controls allow you to access all the needed buttons on one simple panel
- The auto thicknesses will capture the piece of wood to give the user the exact starting thickness
- The variable speed feed belt allows you to accurately dial in the exact feed speed to best suit your project
- Digital readout will show the user the exact thickness of the finished piece, or will allow you to preset exactly the thickness you prefer for the finished piece
- The disc brake slows the machine quickly and will activate immediately to stop machine in an emergency
-
Out of stock
This box brake’s welded steel frame allows for a large capacity—without the twisting you’ll get from many competing metal brakes. The BB-14418 will provide years of trouble-free use.- 18 gauge mild steel and 22 gauge stainless steel maximum capacity.
- Bends sheet metal across its entire 12-foot (144”) length.
- 135° maximum bend angle.
- Includes 31 interchangeable fingers of varying lengths (6 fingers of 3", 6 of 4", 10 of 5", 9 of 6" ).
- You can make just about any size box or pan imaginable up to a 6” box depth.
- 2 large counterweights help the operator bend at full length and capacity without straining.
- Electro-welded steel construction enables this sheet metal brake to handle its maximum capacity while maintaining accuracy.
-
This industrial bandsaw is huge, great attention has been given to the fine points that make it easy to use and performance perfection. The tilt mechanism is manufactured from two pieces of solid cast iron that slide within each other in a dovetail system. There is an ergonomically designed foot brake that shuts the motor off automatically, and easy blade change make operating this bandsaw a joy. -
Out of stock
Door builders and cabinet shops will love the extra capacity of this 37" wide-belt sander. With a 15 HP 3-phase sanding motor, this wide-belt is built for daily industrial use with features such as a heavy-duty steel cabinet, pneumatic belt oscillation, and a built-in air filter/regulator. The digital control pad automates table adjustments and is accurate to 0.005". Also, the variable-speed conveyor, adjustable oscillation controls, and adjustable graphite/felt platen easily allow the operator to find the perfect combination of settings to achieve soft, smooth finishes on all types of wood. Made in an ISO 9001 Factory CSA certified meeting CSA C22.2 #105-1953 and UL 987-7th standards! Specifications- Sanding motor: 15 HP, 220V/440V*, 3-phase, 36A/18A, 1725 RPM
- Conveyor motor: 1 HP, 220V/440V*, 3-phase, 3.4A/1.7A
- Table elevation motor: 1/4 HP, 220V/440V*, 3-phase, 1.2A/0.6A, 1725 RPM
- Max. board width: 36-1/2"
- Max. board thickness: 6"
- Min. board length: 14"
- Air requirements: 75 PSI
- Surface speed of drums: 2565 FPM
- Conveyor feed rate: Variable, 15-49 FPM
- Built-in air filter/regulator
- Independent motor control
- Pneumatic belt tracking and tensioning
- Digital sanding load meter
- Emergency stop bar
- Digital readout and control panel
- Three 4" dust ports
- Steel cabinet
- Steel outfeed drum
- Rubber infeed drum
- Rubber pressure rollers
- Micro-adjustable graphite/felt platen
- CSA certified meeting CSA C22.2 #105-1953 and UL 987-7 standards
- Overall size: 52-1/8"W x 69-5/8"H x 49-3/8"D
- Approximate shipping weight: 1800 lbs.
- *440V operation requires purchase of additional components
-
Out of stock
Stock Number 311440 Compound Slide Travel (In.) 3-1/2 Cross Slide Travel (In.) 7 Distance Between Centers (In.) 40 Drive EVS Gross Weight (Lbs) 1584 Input Power 230V 3ph Length of Gap (In.) 9-1/2 Max Tool Size (In.) 3/4 x 3/4 Motor (HP) 3 HP, 230V, 3-Phase Motor Phase 3 Motor Power (HP) 3 Motor Voltage (V.) 230 Net Weight (Lbs.) 1320 Number of Inch Threads 34.0000 Number of Longitudinal and Cross Feed Rates 25 Number of Metric Threads 34.0000 Number of Spindle Speeds Variable Overall Dimensions (L x W x H) (In.) 68.5 x 28.3 x 50 Prewired Voltage (V.) 230 Prop 65 Cancer and Reproductive Harm Range of Cross Feeds (IPR) 25 Range of Inch Threads (TPI) 2-56 Range of Longitudinal Feeds (IPR) 0.0016-0.0460 Range of Metric Threads 0.5-12 Range of Spindle Speeds (RPM) 40-2000 Shipping Dimensions (L x W x H) (In.) 76 x 30 x 61 Spindle Bore (In.) 1-1/2 Spindle Mount D1-4 Spindle Taper Morse #5 Spindle Taper with Sleeve MT-5 Spindle Thread (In./TPI) 2 - 56 Steady Rest Capacity (In.) 0.23-0.61 Copper Shaft ( Standard) 0.20-2.36 Bearing Roller(OP) Swing Over Bed (In.) 14 Swing Over Cross Slide (In.) 9-1/16 Tailstock Spindle Travel (In.) 6-1/8 Taper in Tailstock Spindle MT-3 Weight (Lbs.) 1584 Width of Bed (In.) 7.48 -
Out of stock
Vertical Band Saw Voltage 230 2 HP 50 to 5000 sfpm Speeds Max Thickness of Cut 20 In. Max Blade Length 151-1/2 In. Corded Max Blade Width 1 In. Blade Thickness 0.025 In. Overall Height 77-1/2 In. Overall Width 29 In. Overall Depth 40 In. Cutting Angle 10 Degrees Left and 45 Degrees Right 1725 RPM 3 Phase 60 Hz Features Variable Speed Drivetrain Allows Operators to Fine Tune The Blade Speed Fast and Easily Table Dimensions 24 in x 22 In. Application Metal -
Out of stock
Elite Vertical Bandsaws are the perfect blend of power and balance. Featuring variable speed drivetrains with precision balanced cast-iron blade wheels with a bonded rubber blade track, precision ground articulating table, 4.2 KVA Bi-Metal Blade stations, and CSA / CUS Certification make Elite vertical bandsaws the choice for precision sawing of ferrous and non-ferrous materials. -
Out of stock
Built with a 2 hp motor, hydraulically controlled back roll, and a steel frame, this electrical plate roller lets you tackle thicker gauges without getting bogged down. It comes with a DRO.- 4’ forming width.
- Bends 13 gauge mild steel over its whole width.
- 2 hp motor runs on 220-volt single-phase power, so you can use it almost anywhere.
- Convenient control pedestal has forward and reverse foot pedals and buttons to control the up and down movement of the back roll.
- Industrial-grade hydraulic system allows the back roll to move up and down and tilt left and right for coning.
- Digital readout gives the position of the back roll for easy repeatability.
- Full steel frame, machined to exacting tolerances, maintains accuracy for many years of use at full capacity.
- Includes 3 wire grooves for forming rings.
- Emergency stop cable on the front and back of the machine for safety.
-
Out of stock
FEATURES: • Dual mitering allows for compound angle cutting of 60° right and 45° left • Tungsten carbide blade guides with precision bearings, stabilizes the blade for increased accuracy and extendes blade life • Large handwheel with blade tensioning gauge acurately measures blade pressure • For added safety, the EHB-1018VM Bandsaw follows strict guidelines and electrical requirements to be certified by CSA Group • Quick positioning vise for clamping of materials • The Elite swing away panel relocates saw controls to a single location, offering finger-tip operation of most major saw functions. • Semi-automatic bow raises after cut to predetermined height • Automatic blade breakage sensor detects accidental breakage and interrupts the power • Heavy-duty construction reduces vibration and deflection • Blade is fully guarded for operators safety -
Out of stock
The Grizzly Industrial G0445-24" 10 HP 3-Phase Platen Type Wide-Belt Sander machine was developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. The main features that enable it to process short pieces efficiently are the single drum and the double infeed and double outfeed pressure rollers that are tucked in closer to the drum. The result is that you have continuous downward pressure on extremely thin stock as short as 14" (G0582). That is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of harder rubber to prevent distortion of thin stock while sanding. The new platen model will sand stock as short as 9" (G0445). All of these models include features like digital read out, powered table elevation, four screw jacks for table support, variable speed, disc brake stopping system, dust proof photo electric eye/pneumatic control for belt oscillation, and separate motors for the drum, the feed rollers, and the table elevation. -
G0603X 25" 15 HP 3-Phase Extreme Duty Planer w/ Helical Cutterhead
Precision planing with digital control.
The G0603X 25" 3-Phase Extreme Duty Planer has an incredible 15 HP motor to make quick work of those big planing jobs. The G0603X features a unique helical cutterhead with 170 inserts rotated at 15° for smooth shearing cuts - meaning you can say goodbye to tear-out - while having an ultra-quiet machine and a smoother finish. The digital controls to allow you to simply enter the thickness of the board you want or the amount you want to remove, which saves time and reduces waste. All controls are conveniently located. The segmented chip breaker leads directly into the dust hood with a 5” dust port to help ensure the work area stays as clear as possible. And because it's a Grizzly Extreme Series®, you can be assured that your machine will provide years of reliable service. Like all Grizzly planers, the G0603X comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0603X manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the planer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS:- Cutterhead motor: 15 HP, 220V/440V*, 3-phase, 37A/18.5A
- Table elevation motor: 1/2 HP, TEFC, 2.4A/1.2A
- Table size: 25" W x 57" L
- Maximum cutting width: 25"
- Maximum stock thickness: 9"
- Maximum cutting depth: 1/4"
- Minimum stock thickness: 1/4"
- Minimum stock length: 10"
- Feed rate: 20, 25 & 30 FPM
- Cutterhead: 6-row helical, 170 inserts
- Cutterhead speed: 4900 RPM
- Power transfer: Triple V-belt
- Overall size with infeed/outfeed tables: 60-1/4"H x 57-3/8"W x 54-3/8"D
- Approximate shipping weight: 2054 lbs.
- Segmented chip breaker
- Precision-ground cast-iron table
- 5" dust port
- Micro-adjustable table height
- Infeed roller is serrated steel
- Outfeed roller is finely finished steel
- Digitally controlled table elevation for extreme accuracy
- Adjustable bed rollers
- Easy access cutterhead
- 3-Speed (20,25,30) feed Rate
- Inch/metric readout
- Emergency stop button*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $250. Please contact Grizzly Technical Support at (570)546-9663 before placing your order.
-
Out of stock
Description
Numeric control pad and digital readout provide the ultimate in precision. Other features include quick-change belt system with automatic belt tensioning, air-controlled automatic belt tracking system, motorized table elevation control, adjustable air-controlled belt oscillation system, and load meter. Certified to CSA and UL standards.Specifications
- Sanding motor: 10 HP, 220V, single-phase, 1725 RPM, 50A
- Feed motor: 1 HP, 220V, single-phase, 1725 RPM, 7A
- Elevation motor: 1/3 HP, 220V, single-phase, 1725 RPM, 3A
- Drum speed: 3550 FPM
- Drum diameter: 8"
- Feed rate: variable, 15–49 FPM
- Max. stock width: 24"
- Max. stock thickness: 6"
- Min. stock thickness: 1/8"
- Required air pressure: 75 PSI @ 7 CFM
- Sanding belt size: 25" x 60"
- Dust port: (2) 4"
- Emergency stop bar with brake
- Manual and motorized table elevation control
- Sanding load meter
- Digital readout and controls
- Made in an ISO 9001 factory
- Footprint: 39-1/4"W x 19-1/4"D
- Height with dust ports: 71"
- CSA certified meeting CSA C22.2 #105–1953 and UL 987–7 standards
- Approximate shipping weight: 1870 lbs.
California Proposition 65 Warning
-
Out of stock
10 Horsepower 3-Phase 24" Wide Belt Wood Sander with Pneumatic Oscillation Control
These machines were developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. This collaboration resulted in the introduction of the G9962Z & G9962ZX, which have become the "staple" of the guitar building industry. The main features that enable these sanders to process short pieces efficiently are the single drum and double infeed and outfeed pressure rollers positioned close to the drum. The result is a continuous downward pressure on extremely thin stock as short as 9", which is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of hard rubber to prevent distortion of thin stock while sanding. Features include digital read out, powered table elevation, variable speed conveyor, disc brake stopping system, pneumatic belt tracking, pneumatic belt oscillation, and separate motors for the drum, feed rollers, and table elevation. -
Out of stock
Jet Vertical Milling Machines perfrom slot and keyway cutting, planning, drilling, diesinking, rebating and routing with surgical accuracy. With the addition of the Acu-Rite 200S 2 axis digital readout makes this unit readily useable for most applications. -
With a fully automatic feeding, cutting and lifting cycle this saw steps productivity up to the next level. The hydraulic vise uses a built-in power feed system to feed material to the desired length determined by a fine tunable sensor. Simply set your cut length, set the desired number of cuts and blade speed, load your material, and press start-the G0886 does the rest! With an impressive 12" x 14" capacity and powerful 3 HP, 3-phase motor, the G0886 has the capabilities to process some serious material. The workhorse also features a built-in 6 1/2 gallon coolant tank and full wrap catch basin to ensure coolant stays where it belongs. Perfect for cutting heavy steel or aluminum stock, you can quick and easily adjust downward feed rate to help maximize blade life. This saw truly does it all! Note: Stock must be at least 1" tall for auto feed to work. -
Ironworker Max Force (Tons) 62 Oil Capacity (Gal.) 7 Speed (Strokes/Minute) 23 Throat Depth (In.) 8-7/8 5 Motor HP Hydraulic Pressure (PSI) 2500 Voltage 230 3 Phase 14 Amps Punching Station Pedestal Die Table 14 in Wide Flat Bar Shear Angle Shear Coper Notcher Metalworking -
Door builders and cabinet shops will love the extra capacity of this 37" wide-belt sander. Available with 15 HP 3-phase sanding motors, these wide-belts are built for daily industrial use with features such as a heavy-duty steel cabinet, pneumatic belt oscillation, and a built-in air filter/regulator. The digital control pad automates table adjustments and is accurate to 0.005". Also, the variable-speed conveyor, adjustable oscillation controls, and adjustable graphite/felt platen easily allow the operator to find the perfect combination of settings to achieve soft, smooth finishes on all types of wood. -
Out of stock
- Wide assortment of finger widths allow greater versatility in the shop
- With fingers installed it can be used as a full-length nose bar, turning the Machine into a straight bending brake
- All body sections are welded Steel plate with heavy truss rods and braces designed to give greater strength and durability
- Both the bed and apron are bored in line to assure the utmost accuracy
- Counter weights can be moved up or down to adjust desired leverage
-
Ironworker Max Force (Tons) 50 Oil Capacity (Gal.) 7 Speed (Strokes/Minute) 23 Throat Depth (In.) 7-1/2 5 Motor HP Hydraulic Pressure (PSI) 2500 Voltage 230 1 Phase 23 Amps Punching Station Pedestal Die Table Flat Bar Shear Angle Shear Universal Open Tooling Station Metalworking -
Out of stock
The JET JTM-4VS Mill is a variable speed vertical milling machine that is engineered to provide precision and reliability. MEEHANITE® castings, a heavy-duty splined motor and three-stage power downfeed with automatic stop are a few of the features loaded onto this JET mill. JET mills deliver performance and precision and are backed by an industry leading 2-year warranty. -
Out of stock
The new TS29 Tilt/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble-free performance. Powered by a big 7-1/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs. -
The EDWARDS 50 Ton Ironworker 1 Phase 230 is a Compact machine that allows for fast and easy transitions between fabrication operations: punch, shear, notch, bend and cope all in one machine. Optimized workstation heights for improved efficiency. Electric foot pedal with integrated jog control. Adjustable electric stoke control.