- 10 gauge mild steel sheet metal maximum capacity.
- Bends across its full 8-foot (96”) working width.
- 1” beam adjustment.
- Maximum bend angle of 135°.
- Industrial-grade hydraulics will make precise and efficient bends, day in, day out, for decades.
- 5 hp motor runs on 220-volt 3 phase power.
- Hydraulic system clamps the material via dual hydraulic motors, then lifts the bending leaf with industrial hydraulic cylinders.
- Adjustable bend auto-stop simplifies production runs; just dial in your desired degree.
- Foot pedal and toggle joystick controls let you operate this hydraulic sheet metal brake in manual or semi-automatic mode.
- Includes 22 hardened 3-piece fingers (6 of 3", 4 of 4", 10 of 5" and 2 of 6" ) to create many different size boxes.
- 6” box depth maximum.
- Fully-welded steel beam and bending leaf, supported with truss rods, prevent twisting and deflection—important when you’re bending heavy 10 gauge mild steel.
- Baileigh covers this hydraulic box and pan brake with a 1-year parts warranty.
-
Uncategorized (223)
-
3M (24)
-
Bessey (19)
-
Bora (12)
-
Delta (75)
-
Forming & Shaping (1)
-
Freud (45)
-
Generac (1)
-
Generator (1)
-
Granberg Alaskan Mills (1)
-
Grex (5)
-
Lathes (1)
-
Makita (7)
-
Measuring Hand Tools (8)
-
Milwaukee (3)
-
Oneida (27)
-
Planers (1)
-
Power & Hand Tools (1)
-
Rikon (40)
-
Sawzall (3)
-
Senco (1)
-
Sheet Metal Brakes, Rolls & Shears (19)
-
South Bend (12)
-
Starret (1)
-
Table Saw (5)
-
Table Saws (1)
-
Tapes and Treads (1)
-
Tormek (8)
-
Triton (14)
-
Vogelzang (1)
-
Woodstock (2)
-
Abrasives (43)
-
Accessories (87)
-
Brands (372)
-
Featured Items (39)
-
Hand Tools (54)
-
Hardware (2)
-
Measuring Tools (44)
-
Paint / Stains / Coatings (7)
-
Power Tools (122)
-
Wood (105)
-
Out of stock
The BB-9610H hydraulic sheet metal brake adjusts to fit the gauge you’re bending and produces uniform bends. -
Out of stock
Features:
- Pneumatic Belt Tensioning
- Digital Readout and Elevation Controls Accurate to 0.005"
- Powered Table Elevation with Keypad for Typing/Storing Exact Measurements
- Industrial Rubber Conveyor Belt
- Micro-Adjustable Graphite/Felt Platen (Rear Drum)
- Variable Feed Speeds
- Disc Brake for Emergency Stops
- Independent Motor Controls for Sanding Drums, Table Elevation and Conveyor
-
Out of stock
The BB-9612H hydraulic box and pan brake can bend 12 gauge mild steel (or lighter) across its full 8-foot (96”) width.- 135° maximum bend angle.
- Comes standard with 22 fingers (6 fingers of 3”, 4 of 4”, 10 of 5”, and 2 of 6”) that you can adjust to make different sizes of boxes and pans.
- Powerful industrial-grade hydraulics lift the leaf and lift or clamp the beam.
- You can run this hydraulic sheet metal brake in manual or semi-automatic mode via toggle or foot pedal controls.
- Adjustable bend auto-stop, for easy and exact repeatability, makes this a very production-oriented hydraulic sheet metal brake.
- Apron angle bar detaches to let you get closer between bends.
- Electro-welded beam and leaf, stabilized with truss rods, minimizes deflection when you’re bending at full capacity and keeps bends crisp and accurate.
- Covered by a 1-year parts warranty.
- We typically keep replacement parts in stock for fast deliveries.
- Includes lifetime technical support by phone. Call up our knowledgeable team of reps whenever you need project advice or help related to this sheet metal finger brake.
-
Out of stock
This finger brake can bend 10 gauge mild steel across its 48” (4-foot) length. A welded steel frame prevents misalignment and ensures accuracy.- Runs on 220-volt 3-phase power.
- Powerful 3 hp motor controls all the hydraulic functions.
- 1” beam adjustment.
- Maximum bend angle of 135°.
- Includes 11 fingers (3 fingers of 3”, 2 of 4”, 5 of 5”, 1 of 6”), allowing you to adjust for different size boxes and pans you want to make.
- Industrial-grade hydraulics lift the leaf for clean, precise motion.
- Adjustable bend auto-stop makes it easy to produce repeatable bends.
- Removable bending support lets you get closer between bends.
- Fully-welded beam and bending leaf, stabilized with truss rods, minimizes any deflection when bending at full capacity.
- You can operate this hydraulic brake in manual or semi-automatic mode.
- Hydraulic motor turns a cam to lift and clamp the beam when bending 10 gauge mild steel.
- Baileigh backs this hydraulic box and pan brake with a 1-year parts warranty.
-
Out of stock
Designed for fast, consistent, low-effort production, this 25” industrial planer lets you set the bed height through a programmable logic controller. No more turning a handwheel to find your thickness!-
-
- 10 hp motor has enough muscle to smooth full 25” boards.
- Spiral cutter head (included) spins at 5,000 rpm.
- Rows of rotatable carbide blades make the spiral cutter head last much longer and work more quietly than a straight-knife cutter.
- Runs on 220-volt single-phase power, so you can use this sophisticated machine in almost any shop.
- Can smooth off up to .25” of material at one time.
- Variable speed from 20 to 30 feet per minute, so you can finetune to get the exact speed you need for your material and finish.
- 25” x 32” main cast iron table expands to an even larger 25” x 57”, supporting your material and helping you create straight, smooth boards.
- Programmable controller makes it simple to set the height. Just enter what you want, and the bed automatically moves to that setting.
- Controller includes automatic backlash compensation to produce exact, repeatable thicknesses.
- Segmented steel infeed roll allows you to smooth multiple boards with different heights at once, increasing your productivity.
- Durable dual steel outfeed roll moves boards along to the cutting head.
- You can set the quick-adjust bed rolls high to reduce friction on rough-sawn stock, or adjust them lower for straighter, smoother results.
- Segmented chip breaker prevents large chips or strips of wood from clogging up the machine or your dust collector.
- Solid iron pressure bar applies even force across the boards to avoid chipping.
- Anti-kickback fingers grip the material so it’s less like to shoot back out if there’s a problem at the cutter head.
- Oversized bearing housings ensure quiet performance and long life.
-
- .
-
-
Out of stock
This machine’s 13-foot length lets you bend unusual shapes from 4 x 8 sheet of metal with room to spare, even on corner-to-corner bending.- Maximum capacity of 22 gauge mild steel.
- Over 13-foot (157”) overall bend length.
- Bend angle of up to 135°.
- You can set up the fingers to do multiple bends along the length of the brake.
- 33 interchangeable fingers of varying lengths (6 fingers of 3", 6 of 4", 10 of 5", 11 of 6") allow you to make just about any size box or pan up to a 6” box depth.
- Fully-welded heavy steel framework enables this metal finger brake to handle its full capacity, day in, day out, for years—without twisting or distortion.
- 2 large counterweights minimize physical strain and help the operator easily bend at full length.
-
Out of stock
The PR-514 is the perfect plate roll for small and medium applications. It comes standard with time-saving features, like a DRO, foot pedal controls, and an additional hydraulic motor.- 5' working width.
- 14 gauge mild steel capacity across its full width.
- 2 hp 220-volt single-phase motor transfers power directly to the driven rolls.
- Second hydraulic motor controls the movement of the back roll.
- Remote control pedestal includes foot pedal controls and the buttons for advancing or retracting the back roll position.
- Digital readout displays back roll position so you can repeat bends easily.
- DRO is positioned at the head of the machine, giving you a good line of sight no matter where you’re standing.
- Rigid steel frame, machined to exacting tolerances, helps prevent deflection.
-
Out of stock
This box brake’s welded steel frame allows for a large capacity—without the twisting you’ll get from many competing metal brakes. The BB-14418 will provide years of trouble-free use.- 18 gauge mild steel and 22 gauge stainless steel maximum capacity.
- Bends sheet metal across its entire 12-foot (144”) length.
- 135° maximum bend angle.
- Includes 31 interchangeable fingers of varying lengths (6 fingers of 3", 6 of 4", 10 of 5", 9 of 6" ).
- You can make just about any size box or pan imaginable up to a 6” box depth.
- 2 large counterweights help the operator bend at full length and capacity without straining.
- Electro-welded steel construction enables this sheet metal brake to handle its maximum capacity while maintaining accuracy.
-
Out of stock
Door builders and cabinet shops will love the extra capacity of this 37" wide-belt sander. With a 15 HP 3-phase sanding motor, this wide-belt is built for daily industrial use with features such as a heavy-duty steel cabinet, pneumatic belt oscillation, and a built-in air filter/regulator. The digital control pad automates table adjustments and is accurate to 0.005". Also, the variable-speed conveyor, adjustable oscillation controls, and adjustable graphite/felt platen easily allow the operator to find the perfect combination of settings to achieve soft, smooth finishes on all types of wood. Made in an ISO 9001 Factory CSA certified meeting CSA C22.2 #105-1953 and UL 987-7th standards! Specifications- Sanding motor: 15 HP, 220V/440V*, 3-phase, 36A/18A, 1725 RPM
- Conveyor motor: 1 HP, 220V/440V*, 3-phase, 3.4A/1.7A
- Table elevation motor: 1/4 HP, 220V/440V*, 3-phase, 1.2A/0.6A, 1725 RPM
- Max. board width: 36-1/2"
- Max. board thickness: 6"
- Min. board length: 14"
- Air requirements: 75 PSI
- Surface speed of drums: 2565 FPM
- Conveyor feed rate: Variable, 15-49 FPM
- Built-in air filter/regulator
- Independent motor control
- Pneumatic belt tracking and tensioning
- Digital sanding load meter
- Emergency stop bar
- Digital readout and control panel
- Three 4" dust ports
- Steel cabinet
- Steel outfeed drum
- Rubber infeed drum
- Rubber pressure rollers
- Micro-adjustable graphite/felt platen
- CSA certified meeting CSA C22.2 #105-1953 and UL 987-7 standards
- Overall size: 52-1/8"W x 69-5/8"H x 49-3/8"D
- Approximate shipping weight: 1800 lbs.
- *440V operation requires purchase of additional components
-
Out of stock
Built with a 2 hp motor, hydraulically controlled back roll, and a steel frame, this electrical plate roller lets you tackle thicker gauges without getting bogged down. It comes with a DRO.- 4’ forming width.
- Bends 13 gauge mild steel over its whole width.
- 2 hp motor runs on 220-volt single-phase power, so you can use it almost anywhere.
- Convenient control pedestal has forward and reverse foot pedals and buttons to control the up and down movement of the back roll.
- Industrial-grade hydraulic system allows the back roll to move up and down and tilt left and right for coning.
- Digital readout gives the position of the back roll for easy repeatability.
- Full steel frame, machined to exacting tolerances, maintains accuracy for many years of use at full capacity.
- Includes 3 wire grooves for forming rings.
- Emergency stop cable on the front and back of the machine for safety.
-
Out of stock
The Grizzly Industrial G0445-24" 10 HP 3-Phase Platen Type Wide-Belt Sander machine was developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. The main features that enable it to process short pieces efficiently are the single drum and the double infeed and double outfeed pressure rollers that are tucked in closer to the drum. The result is that you have continuous downward pressure on extremely thin stock as short as 14" (G0582). That is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of harder rubber to prevent distortion of thin stock while sanding. The new platen model will sand stock as short as 9" (G0445). All of these models include features like digital read out, powered table elevation, four screw jacks for table support, variable speed, disc brake stopping system, dust proof photo electric eye/pneumatic control for belt oscillation, and separate motors for the drum, the feed rollers, and the table elevation. -
Out of stock
G0603X 25" 15 HP 3-Phase Extreme Duty Planer w/ Helical Cutterhead
Precision planing with digital control.
The G0603X 25" 3-Phase Extreme Duty Planer has an incredible 15 HP motor to make quick work of those big planing jobs. The G0603X features a unique helical cutterhead with 170 inserts rotated at 15° for smooth shearing cuts - meaning you can say goodbye to tear-out - while having an ultra-quiet machine and a smoother finish. The digital controls to allow you to simply enter the thickness of the board you want or the amount you want to remove, which saves time and reduces waste. All controls are conveniently located. The segmented chip breaker leads directly into the dust hood with a 5” dust port to help ensure the work area stays as clear as possible. And because it's a Grizzly Extreme Series®, you can be assured that your machine will provide years of reliable service. Like all Grizzly planers, the G0603X comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0603X manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the planer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS:- Cutterhead motor: 15 HP, 220V/440V*, 3-phase, 37A/18.5A
- Table elevation motor: 1/2 HP, TEFC, 2.4A/1.2A
- Table size: 25" W x 57" L
- Maximum cutting width: 25"
- Maximum stock thickness: 9"
- Maximum cutting depth: 1/4"
- Minimum stock thickness: 1/4"
- Minimum stock length: 10"
- Feed rate: 20, 25 & 30 FPM
- Cutterhead: 6-row helical, 170 inserts
- Cutterhead speed: 4900 RPM
- Power transfer: Triple V-belt
- Overall size with infeed/outfeed tables: 60-1/4"H x 57-3/8"W x 54-3/8"D
- Approximate shipping weight: 2054 lbs.
- Segmented chip breaker
- Precision-ground cast-iron table
- 5" dust port
- Micro-adjustable table height
- Infeed roller is serrated steel
- Outfeed roller is finely finished steel
- Digitally controlled table elevation for extreme accuracy
- Adjustable bed rollers
- Easy access cutterhead
- 3-Speed (20,25,30) feed Rate
- Inch/metric readout
- Emergency stop button*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $250. Please contact Grizzly Technical Support at (570)546-9663 before placing your order.