SuperMax SuperBrush Single 36, 1PH, 220V SUPMX-91367

Description

• INTELLISAND Technology: Automatically adjusts conveyor speed based on load
  • Prevents gouging, damaging or burning stock
  • Provides consistent finish even with varying grain pattern and density
  • Greatly increases abrasive planing and dimensioning speed
• Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor, guaranteeing flatness to less than .010″ across the width of the sander
• Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner
• Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap
• Easiest access to abrasive fastening system of any drum sander! Machine design includes additional space around abrasive, eliminating the need for special tools.
• Self-cooling drum prevents overheating and extends abrasive life
• Drum ball bearing are sealed and permanently lubricated
• Cast stand, zinc-plate steel bed, centerless ground column tubes

• Sand two grits in a single pass with a 25×2 Double Drum Sander. Featuring INTELLISAND Technology and a 5 HP motor, you can significantly reduce the amount of time you spend sanding.

  The 25×2 Double Drum Sander features INTELLISAND Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor. Available in Single and 3 Phase power.

  Download Manual

  Sanding Capacity:	Maximum Width (in): 25, 37, 50 Minimum Length (in):  3-1/2 Maximum Thickness (in): 25 model: 6 37 & 50 models: 12 Minimum Thickness (in): 1/32
  Dimensions HxWxD (in):	25 model: 43 x 46 x 31 37 model: 43 x 58 x 31 50 model: 50 x 71 x 31
  Drum (in): (extruded aluminum)	25 model: 5 x 25 37 model: 5 x 37 50 model: 5 x 50
  Drum speed:	1740 RPM
  Dust Hood: (Steel hood, hinged at back	25” model: one (2) 4” vacuum port, min. 1000 CFM recommended 37 & 50 models: (3) – 4 vacuum ports, min. 1800 CFM recommended
  Ball bearings (1”):	4, sealed and permanently lubricated
  Conveyor Motor:	25 & 37 models: 100 in. -lb. torque, direct drive D.C motor, ranged variable, 0-15 FPM 50 model: 220 in.-lb. torque, direct drive D.C motor, ranged variable, 0-15 FPM
  Drive Motor (TEFC):	25 & 37 models: 5 HP 50 model: 7-1/2 H
  Power Requirements:	208-230V, 60HZ; 1 Ph, 30 amp service
  Shipping Weight (lbs):	25 model: 475 37 model: 525 50 model: 820