- Designed with Hand Specific Tool Holders
- Padded Two Ply Tool Bags Keep Their Shape. NoSpill Tool Holder System
- Extremely Abrasion Resistant Industrial Nylon
- Hand-Specific Tool Holders Promote Maximum Working Rhythm on the Job
- Leather Tool Holders and Corner Reinforcing
-
Out of stock
-
Out of stock
- Fully adjustable for pant waist 32 to 41 Inch
- D rings pre-installed for use with suspension systems
- Hand specific tool holders promote maximum working rhythm on the job
- Designed with hand specific tool holders; Two ply bags keep their shape
- Tools are not included
-
Out of stock
- Hand-specific tool holders promote maximum working rhythm on the job
- Premium top-grain leather; Made in USA
- Copper rivets reinforce main bags ; Tool Bag Dimensions:Main Tool Bag:9 x 8(inches); Fastener Bag Dimensions-Outer Bag : 6inch x 5.5inch, Middle Bag : 7inch x 6inch, Upper Bag : 4.5inch x 4.5inch
- No Spill tool holder system; Function engineered for the modern builder
- Tools are not included
-
Out of stock
Heavy-duty design built for the jobsite. The Mr. Heater Liquid Propane Forced Air Heater comes with a standard 10ft hose and regulator and all the safety you would expect of a Mr. Heater product. Equipped with factory installed high limit switches and thermoelectric safety valves, you can feel comfortable using these heaters on any jobsite. Just plug the heater into a 110v outlet, hook up the included hose and regulator to a 40lb (on low setting) propane tank or larger, and you are ready to take the chill out of any job.- 125,000 BTU per hour
- For use with propane gas
- Heats approximately 3125 sq ft
- Runs up to 11 hrs on 40lb tank (low setting)
- High temperature limit switch
- Continuous ignition
- QBT Technology - 50% Quieter than a standard propane heater
- 10ft hose and regulator included
-
Sturdy and Secure
The Delta Power Tools 78-919BT2 Biesemeyer Fence is adjustable for fast accurate cuts time and time again. This fence system comes with a three-point locking system and comes with various features such as easy-gliding, steel tube fence body to handle quick, precision ripping and square cuts, the Delta Power Tools 78-919BT2 Biesemeyer Fence is ideal for fence attachments. -
The DELTA 50-289 mobile machine base for Unisaw lets you easily and safely move your machines out of the way when not in use, so you'll be able to maximize the space in your shop. The 50-289 fits DELTA Unisaws with 52-inch Unifence and adds rolling portability. The mobile machine base features a foot-operated control lever that lets you easily raise and lower the base for either moving or locking it in place. When lowered into position, the base has adjustable foot pads to ensure even contact with the floor.- Heavy-gauge steel and features a foot-operated control lever that raises and lowers the base for easy movement and positioning
- For UNISAWS with 50-inch/52-inch Fences
- 20-5/8-inch by 20-5/8-inch Combines 50-273 and 50-284
- Mobile base for Older Unisaws PRE-2009 with 52-Inch fence assembly, 1 crank handle mounted on front and other handle mounted on the side of the cabinet.
- Mobile machine base includes base, control lever, and adjustable foot pads
-
-
Out of stock
Model 80-805: 8″ Low Speed Grinder & 80-910 Stand
• Powerful 1/2 HP Motor • Low Speed 1,750 RPM • Adjustable Tool Rests • Adjustable Safety Eye Shield and Spark Resistors
1/2 HP Low Speed Bench Grinder #80-805 has more than enough power for small workshops and for carpenters, turners, carvers and other craftspeople working with hand tools. Its left tool rest includes a groove in its design for the sharpening of drill bits. Wheel flanges are stamped. Grinder includes a diamond faced wheel dressing tool.Model 80-910 Stand
- Adjustable Height 28" - 36" - 2" Diameter Steel post with cast iron base - Storage for two grinding wheels - steel top measures 12" x 9 1/4" with 1/2" wide slots for mounting grinders -
Out of stock
1 HP portable dust collector #60-105 is a great size and adaptable for many uses that a small shop encounters. Single 4 In. dust port draws 660 CFM, more than enough vacuum power for big chip makers, like jointer and planers. Built-in casters and handle make moving it about easy. Features an adjustable pipe extension with chip collecting funnel that can be positioned high for use with lathes, drill presses, workbenches etc. Includes 2 micron cloth filter bag, 108 In. long x 4 In. dust hose, adjustable pipe & funnel attachment system, safety on/off switch, and wall mounting brackets. 1 HP develops 660 CFM 4 In. dust port inlet for attaching to a single machine Includes casters for easy mobility around the shop Includes adjustable pipe & funnel system for dust collection use with lathes, drill presses, workbenches, etc. can be positioned up to 55 In. high. -
The Delta Mobile Base For 36-L336 36 in. UNISAW (For Dual Front Crank Unisaws) is essentially for easily moving your Delta Unisaw. Made from Steel in the US.- Adds mobility to your saw in your workshop
- Adjustable feet provided for leveling saw
- Heavet duty steel, designed specifically for this new Unisaw
-
Out of stock
- Vacuum operating button locks vacuum force
- Twin leveling toggles make surface alignment easy
- Steel threaded spindle is precision machined
- cold drawn profile guide rails for smooth powerful clamping
- Ergonomic grip 2 component handle
-
Out of stock
-
These 28" table legs are perfect to pair with a table top.
These are very heavy duty able to withstand practically any table top you choose to use. The cast aluminum makes these table legs incredibly strong while keeping things to a manageable weight.Specification:
- Height: 28"
- Mounting width: 18"
- Widest Point: 24"
Features:
- Raised Gold Lettering
- Included Threaded Inserts and Bolts
- Cast Aluminum - Like Cast Iron but without the weight.
- Made in The USA
-
The Mast-R-Lift II has 5 double sealed bearings. The lift adds tension to the threaded spindle to remove backlash and vibration, and prevent setting changes while routing. Includes a dedicated locking mechanism for heavy duty, long term routing operations, accessible from the top of the top surface and is engaged with the same crank handle used to raise and lower the Lift. The Mast-R-Lift II also fits most fixed base routers on the market today without the use of an adaptor collar. The unique clamping blocks enable users to use different fixed base routers with the Lift as opposed to dedicating a router. All of our top plates on our Lifts are hard anodized. This is an engineered surface treatment and not just a cosmetic sulphuric treatment that will wear off. The shafts on the Mast-R-Lift II are pressed into a shaft mount with hydraulic pressure, not just threaded to the top plate. -
Out of stock
Use the FS 2700 Guide Rail (106 inches) with the Festool TS Plunge cut saw to make precision cuts up to 100 inches long. - Integrated splinterguard serves as cut line and prevents tear-out and splintering - A fully integrated system, use your Festool routers or jigsaw with the guide rail for expanded capability - Non-skid, dual-clamping rubber strips prevent movement during the cutting operation, saving significant set up time - Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action - SHIPS VIA FREIGHT -
Tormek T-4 – Compact Water Cooled Sharpening System for Edge Tools – US Version – English Handbook- Complete Water-Cooled Sharpening system for Wood Chisels, Plane Irons, Spoke Shaves, Carving Tools, Lathe Turning Tools, Knives, Axes and most edge tools
- Accessories Jigs available to assist you in achieving a better than factory blade edge quickly
- Includes complete instruction manual and easy to follow instructional videos for achieving professional tool sharpening results
- Dual Grit 1-5/8" wide Sharpening Stone turns at just 120 RPM to ensure your blade does not overheat and the steel lose its temper
- Die Cast Zinc top, Impact resistant ABS plastic, Industrial Quality Motor, Stainless Steel Hardware for long life, backed by 7 year warranty, made in Sweden
-
Out of stock
The 6” x 48” Belt / 10” Disc Sander with Stand offers woodworkers the same belt and disc sizes and operating features as the #50-120, but, has a more powerful motor, re-designed base of sturdy, heavy gauge sheet steel, higher positioned disc location, cast aluminum disc table with patented rack & pinion table angle-setting handle system, and it includes a steel stand.- Cast Iron & Steel Construction
- Belt Size 6″ x 48″
- Belt Tilts 0 – 90°
- 10″ Disc Diameter
- Includes: Steel Stand, Work Support Table, Miter Gauge, HEX Wrenches, Convenient Carrying Handles, 1 – 80 Grit Disc and 1 – 80 Grit Belt
-
Out of stock
-
Out of stock
Rikon Model 30-120: 13″ Benchtop Drill Press -
Just Released, Improved Design 11/23
Military Grade Aluminum Arms, sealed bearings for smooth operation and accuracy.
Shawdowline Worklight. Lights work area and casts cut line even in bright outdoor light.
18 Inch crosscut capacity for wide stock.
Upfront Bevel and miter controls. Indents at all popular miter and bevel angles
NO RAILS Allows unit to be located against the wall in the workshop
-
The DELTA 34-976 Deluxe Uniguard Table Saw Blade Guard fits DELTA 10-inch Unisaws and Contractor's Saws, and has an innovative, overhead design that doesn't have a mounting bracket behind the blade to interfere with dado cutting or molding operations. The operator remains protected for non-through cutting operations since the blade guard doesn't have to be removed. For through-cutting, the guard has a removable splitter with anti-kickback pawls that afford the operator additional safety. With a U-shaped support arm, you'll be able to cut the full capacity of the fence; you can also keep half the guard elevated for use of a push stick when cutting with the fence close to the blade. The Uniguard Table Saw Blade Guard comes includes the guard, splitter, table mounting bracket, support arm and extension. -
-
Out of stock
NEWMotor Motor Speed (no load) Amps, Hertz, Phase Dust Collection Velocity CFM Max. Static Pressure (at 0 CFM) Blower Impeller Sound Rating @ 6 Feet Canister Filtration Rating Filtration Efficiency Canister Pleated Filter Size Total Pleated Filter Surface Filter Cleaning Method Plastic Bag Length (installed) Plastic Bag Capacity Dust Ports / Hose Connections Intake Funnel Size Machine Certification1HP, TEFC 3,450 RPM 7 A / 3.5 A, 60 Hz, 1 Ph 800 @ 4” or 1,100 @ 5” inlet 7.2” 10” Diameter, Aluminum <86.375 dB 1 Micron 99% 19-5/8” x 7-1/8” 13.46 sq/ft Hand crank, internal rotating flapper 20” 1.5 Cu. Ft. 1 @ 5”, 2@4” 5” diameter All metal frame -
Out of stock
New! 10” PORTABLE TABLE SAW WITH STAND #11-600S is a must-have for homeowners, small shops, and contractors. This portable saw has a powerful 2HP, 15A, 110V variable speed motor that has the strength to tackle any project. Selecting the proper blade speed allows the user to dial in precision, and performance for each type of material to be cut.This technology retains torque throughout the cut which will prevent burning of material and premature dulling of blades. This portable saw has all the features of a large shop saw including a quick-release blade guard, riving knife for through cuts and the capability of cutting 13/16” dados. Rack and pinion gearing for rapid blade elevation and lowering. Includes portable, foldable stand for easy transport and storage.-Powerful 2 HP, 1Ph, 110V, variable speed motor-Blade speed variable from 2000 to 4200 RPM-28 In. maximum rip capacity to right of the blade-Arbor lock for safe and rapid blade changes-Adjustable rear work support-2-1/2 In. standard dust port=Onboard fence, tool and accessory storage -
Sale!
- Motor: 1/2 HP
- Power Requirement: 120V, Single-Phase, 60 Hz
- Swing: 34 in.
- Type: Radial
- Range of Spindle Speeds: 550 – 3000 RPM
- Drilling Capacity: 1/2 in. in Steel
- Drill Chuck Type: JT33 Key Chuck
- Quill Diameter: 1.575 in.
- Shipping weight: 147 lbs.
-
Out of stock
12” Variable Speed Benchtop Drill Press #30-212VS features a more powerful motor and a Vari-speed pulley system that adjusts to chuck speeds with a simple turning of a lever! Includes digital RPM readout, LED work light, laserX-Y drilling guide, clamp-friendly thin edge woodworking table and a 5/8” chuck. -
The Freud D0760A 7-1/4" 60T Diablo Ultra Finish Work Table Saw Blade - For a heavy-duty blade that powers through fiber cement with clean, low-dust crosscuts, look no further than the Freud D1006DH Diablo 10-Inch Fiber Cement Saw Blade. Featuring proprietary James Hardie polycrystalline diamond (PCD) tipped construction, this blade generates minimal dust, easily handles full-time use, and offers an extended cutting life. -
Out of stock
RIKON #50-272 BELT SANDER / BUFFER 2” X 72” is extremely versatile for handling a variety of sanding, grinding, shaping, sharpening, buffing and polishing projects. Solidly made of all-steel construction, this 1 HP machine features an adjustable sanding belt arm for mounting 2” x 72” abrasive belts, and a 8” long 1” diameter spindle for mounting your flap sanders, pneumatic sanders or buffing wheels. The 2” x 72” extra- long abrasive belt is cool-running and can be used with the platen and adjustable angle tool rest for accurate sanding/shaping/grinding use. The belt arm also rotates and can be set at any angle from 0-90-0 degrees! Working on the 8” rubber-faced drive wheelor above the platen also allows for extra working flexibility when shaping projects. The Spring-loaded top idler wheel makes tracking belts, and the changing of belts a fast and simple task. This Belt Sander & Buffer will be a faithful addition to any workshop to tackle sanding jobs, grinding to sharpening tools or making knives. FEATURES • Five year warranty • Powerful 1HP motor is 110 volts, 14 amps, but can be changed to operate at 220 volts, 7 amps. • Made of rugged, all-steel components for extra strength and reliability. • Large handles and knobs make adjustments easy and secure. • Machine takes the most popular 2” x 72” belts or adjusts for using special 2” x 76” belts. • Belt arm adjusts 180 degrees, from a forward horizontal position, to 90 degrees upward, to laying backwards horizontally. This allows full user access to working on the drive wheel, with the tool rest and platen, or free shaping on the belt. • 10-3/8” x 2” steel platen gives ample rear belt support for sanding flat edges or surfaces - wood, plastics or metals. 5-1/2” x 2” flat tool rest adjusts to most any angle for positioning workpieces accurately to the belt. • 8” long 1” diameter spindle will take optional sanding flap wheels, pneumatic sleeves, or buffing wheels for added shaping and finishing of projects. • Includes template for accurate drilling of holes for mounting the machine on workbenches or stands. Hardware is not included.MOTOR Horsepower Amps Volts, Hz Speed TABLES Belt Table Size Belt Table Tilts Belt Platen WHEELS & BELT Drive Wheel Idler Wheel Belt Size Speed Tilt SPINDLE Spindle Thread OVERALL Height Width Depth Base Size Assembled Net Weight Shipping Weight Shipping Carton WARRANTYMotor 1 HP Amps 14/7 Volts 110/220V, 60Hz 1,720 RPM Bed Table Size 5-1/2” x 2” Bed Tilt 0° to 50° + 10-3/8” x 2” Drive Wheel 8” x 2” Idler Wheel 4” x 2” Belt Size 2”x72” or 2”x76” Belt Speed 3,600 (SFPM) Tilt 0° – 90° – 0° Spindle 1” diameter x 8” long Thread 1” x 8 UNC, 2” long Height 36-3/4” Width 30” Depth 10-3/4” Belt Size Assembled 7” x 17-1/2” Weight 68 lbs. Shipping Weight 73 lbs. Shipping Caron 29-1/2” x 19” x 13-1/2” -
Out of stock
13” Benchtop Planer #25-130H features a six row helical-style cutter head and 26 HSS insert cutters. Each indexable knife insert is precision sharpened on two edges and can be easily changed/rotated if damaged orworn – just loosen, rotate, and retighten! The alternating cutter pattern in the cutter head is super-efficient, and produces a smooth cut surface. Planer features a threaded 4-post threaded housing for extra head stability when running, side handle for quick table height adjustments, repeat cut setting lever, large fold-up extension tables, flat top for stock returning, and side carry handles. -
The 2696-26 M18™ Cordless 6-Tool Combo Kit includes the M18™ 1/2" Hammer Drill / Driver (2602-20), M18™ 1/4" Hex Impact Driver (2650-20), M18™; Sawzall® Recip Saw (2620-20), M18™ 6 ½" Circular Saw (2630-20), M18™ 4-1/2" Cut-off / Grinder (2680-20) and M18™ Work Light (49-24-0171). The M18™ Cordless LITHIUM-ION System's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by REDLITHIUM™ the M18™ cordless system delivers more torque, more power, and longer run-time than the competition. -
-
Out of stock
-
Out of stock
The Rikon #20-800H 8'' Benchtop Jointer features a helical head with six rows of carbide insert cutters—16 carbide cutters in all. Each insert cutter has two edges for for an exceptionally smooth, flat jointed surface. The cutters can be rotated to expose a fresh edge, and when it comes time to replace them (see #53059), there is no need to level the knives as with a traditional jointer. The jointer itself features rigid, all-metal construction, machined aluminum tables with integral extensions that pull out for up to 51-1/2'' of support, a quick depth setting mechanism with scale, and an adjustable fence that tilts from 90° to 45°. It also comes with a spring-loaded safety guard, dust port, an easily accessible front-mounted on/off switch and two push blocks. Features:- Powerful 10-amp motor
- Helical cutterhead for a smooth cut
- All steel construction for durability
- Carbide insert knives can be rotated to expose a fresh edge
- Large 8-3/16'' x 30-1/2'' table with slide-out extensions for up to 51-1/2'' of length
- 4-3/8''H x 19-1/4''L fence angles from 90° to 45°
- Replacement carbide cutters available (#53059, sold separately)
-
-
- Powerful 13 amp Motor will cut thru natural and man made pavers
- 7” Diamond Cutting Wheel handles up to 2 3/8” stone
- Largest Rip/diagonal cutting capacity in class
- Heavy duty rip fence w/ positive stop stops @ 0, 22.5 ,45 degrees
- Heavy duty rail system engineered for exceptional straight, accurate smooth cuts
- Removable extension table for use w/ larger format tiles
- Saw frame constructed of durable steel pipe
- Snake pipe water nozzle allows precise water control and placement
- Front access to water tray greatly simplifies cleaning & draining
- Water supply line is externally mounted and easily accessible for cleaning
- Blade Guard easily opens and secures with finger knob
- Blade splash guard and back splash tray keeps work area dry and returns water to tray
- Water put designed for use in water tray or bucket
- Divider in water tray filters slurry and extends pump life
-
Out of stock
