-
Out of stock
Engineered for top performance, the SIMPSON pressure washer trailer 3800 PSI at 3. 5 GPM is a self contained cleaning machine. Designed to utilize the power and performance from top of the line SIMPSON pressure washers matched with the portability of a utility trailer, it lets you bring a cleaning solution into the field, where water supply is an issue. The 95001 is run by a Honda engine and comes with a 100’ hose, an ergonomic spray gun and 5 Quick-Connect nozzles. This powerful SIMPSON mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine and begin cleaning. Warranty Details: Engine - 3 Year Limited Commercial Warranty | Pump - 5 Year Limited Warranty | Frame - 1 Year Limited Warranty -
- INTELLISAND Technology: Automatically adjusts conveyor speed based on load which prevents gouging, damaging or burning stock. This Provides consistent finish even with varying grain pattern
- Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no "flex" in conveyor, guaranteeing flatness to less than .010" across the width of the sander
- Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner
- Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap
- Easiest access to abrasive fastening system of any drum sander! Machine design includes additional space around abrasive, eliminating the need for special tools
- Self-cooling drum prevents overheating and extends abrasive life
- Maximum Width: 37"
- Minimum Length: 3-1/2"
- Maximum Thickness: 12"
- Minimum Thickness (in): 1/32"
- 43" x 58" x 31"
- 5" x 37" (extruded aluminum)
- 1740 RPM
- 4" vacuum ports, min. 1800 CFM recommended
- 4, sealed and permanently lubricated
- Base with Casters
- 100 in. -lb. torque, direct drive D.C motor, ranged variable, 0-15 FPM
- 5 HP
- 208-230V, 60HZ; 1 Ph, 30 amp service; 3 Ph 20 amp service
- 525 lbs
-
Out of stock
This powerful SIMPSON mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine and begin cleaning. The SIMPSON mobile pressure washer 4200 PSI at 4. 0 GPM is a self-contained cleaning machine. Engineered to utilize the power and performance from top of the line SIMPSON pressure washers, it’s matched with the portability of a utility trailer. The 95002 is run by a Honda engine and comes with a 100’ hose, an ergonomic spray gun and 5 Quick-Connect nozzles. This mobile system brings a cleaning solution into the field where water supply is an issue. This powerful SIMPSON mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine and begin cleaning.Warranty Details: Engine - 3 Year Limited Commercial Warranty | Pump - 5 Year Limited Warranty | Frame - 1 Year Limited Warranty -
Out of stock
The SIMPSON trailer pressure washer 3200 PSI at 2.8 GPM is a self-contained cleaning machine. Engineered to utilize the power and performance from top of the line SIMPSON pressure washers matched with the portability of a utility trailer. The 95000 is run by a Honda engine and comes with a 50’ hose, an ergonomic spray gun and 5 Quick-Connect nozzles. This mobile system brings a cleaning solution into the field where water supply is an issue. This powerful SIMPSON mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine and begin cleaning. Warranty Details: Engine - 3 Year Limited Commercial Warranty | Pump - 5 Year Limited Warranty | Frame - 1 Year Limited Warranty -
Out of stock
-
Sale!
- Motor: 2 HP
- Cutting capacity - rectangular: 9-1/2 in.
- Cutting capacity - round: 10 in.
- Blade speeds: 98 - 394 FPM
- Blade length: 132 in.
- Head type: Swivel
- Footprint: 28-1/2 in. x 45 in.
- Overall height: 58 in.
- Shipping weight: 967 lbs.
-
Out of stock
This T1242 30-Ton Electric/Hydraulic Shop Press features a 3 HP, 220V, single-phase hydraulic pump motor, horizontally adjustable sliding piston head, easy-access push-button controls, 10" stroke, and table-to-piston distance of 7-3/4" to 39". Includes carriage/table lifting chain, two table plates, and a full-size rear guard plate. -
Out of stock
At Powermatic, we believe that ambition is the fuel that drives progress. Every product we engineer is born out of the same idea: How can we empower woodworkers to do more? In shops across the world, craftsmen are continually pushing the limits of their creativity, and in turn, challenging us to provide the best tools for the job. When we reimagined our line of bandsaws, we not only set out to meet their ambitions, but to exceed them. Larger projects and larger workpieces call for more power, more resaw capacity and more cast iron. This bandsaw also features the legendary quality, precision and attention to detail that has been helping woodworkers expand their ambition for more than ninety years. -
Out of stock
The PM3000B brings heavyweight performance and patented innovations to the 14-inch table saw arena. The riving knife rises and lowers with the blade, substantially reducing kickback risk; and both riving knife and blade guard each have a quick-release, so mounting and removing them is fast and tool-free. A wide-stance trunnion and concave teeth on the trunnion gears promote smooth blade raising/tilting. The Poly-V drive belt system results in quieter, more efficient power transfer with virtually no vibration and less heat build-up. A newly designed push button arbor lock is accessible from above the table top and eliminates the need for dual arbor wrenches. Sloped cabinet floor, dust shroud around the blade, and built-in port for dust extraction. Style (Type)Cabinet Blade Diameter (In.)14 Arbor Diameter (In.)1 Arbor Speed (RPM)4500 Maximum Depth of Cut at 90 Degrees (In.)5-1/8 Maximum Depth of Cut at 45 Degrees (In.)3-1/2 Maximum Diameter of Dado (In.)8 Maximum Width of Dado (In.)13/16 Table in Front of Saw Blade at Maximum Depth of Cut (In.)15-1/2 Maximum Rip Right of Blade (In.)50 Maximum Rip Left of Blade (In.)14 Table TypeCast Iron Table Height from Floor (In.)35-1/4 Table Size (In.)26 x 38 Table Size with Extensions (In.)48 x 38 Table T-Slot (In.)3/4 x 3/8 Dust Collection Minimum CFM Required (CFM)600 Dust Port Outside Diameter (In.)4 Motor Voltage (V.)230/460 Prewired Voltage (V.)230 Motor Current (Amps)18.4/9.2 Recommended Circuit Size (Amps.)30 -
Grizzly G0901 28" Portable Sawmill
Buy now to lock in the sale price! Orders won’t ship until Spring 2021
Mill your own lumber right off your property!
The all-new Grizzly G0901 28" Portable Sawmill is designed for quick setup with a rock-solid, 12-foot steel track with adjustable feet capable of leveling on just about any surface. The track is modular, allowing you to easily attach and level additional 6-foot-long sections in order to mill practically any length of lumber you need. The cut thickness is set in 1/16" intervals with the locking hand crank and the sturdy 4-column saw carriage moves smoothly along the track on ball-bearing rollers. Two adjustable work stops hold the log in place, while a manually adjusted workpiece clamp prevents movement during cuts. Our engineers worked hard to create the ultimate sawmill with the capacity and solid performance needed to get the job done right in the field! The G0901 28" Portable Sawmill comes with a one-year warranty which covers replacement parts. The product is supported by a US-based support team and parts are available online and shipped from our massive parts department in Springfield, MO. FEATURES:- Modular track system for varying length requirements
- Hand throttle allows easy blade speed control during the cut
- Locking hand crank with detents for quickly setting cut thickness in 1/16" increments
- Ball-bearing rollers provide smooth movement of saw carriage along track
- Leveling feet for stabilizing saw mill on uneven ground surface
- Adjustable work stops and clamp for holding log in place during cut
- Onboard water reservoir with drip nozzle for blade lubrication
- Gas engine: 13-1/2 HP Briggs and Stratton®
- Included track length: 144"
- Maximum log diameter: 28"
- Maximum cut width: 22"
- Maximum cut thickness: 6"
- Blade size: 1" x 144"
- Wheel diameter: 19"
- Footprint: 35" x 144"
- Overall dimensions: 75" W x 144" L x 56" H
-
Sand stock up to 36-1/2" wide and 4" thick with variable speed feed control and the economy of spiral-wrapped 6" wide sandpaper rolls. Built for production environments, these Drum Sanders feature industrial-quality conveyor belts and dual 6" sanding drums. Includes a 4-port dust scoop to maximize dust collection, easy access to sanding drums, emergency stop for safety, solid steel construction, independent motor control, amp load meter, and massive power with a 10 HP, single-phase motor. With the variable-speed control on the conveyor, you can dial in the perfect finish you need for each job. CSA certified meeting CSA C22.2 #105-1953 and UL 987-8 standards! -
Out of stock
- Built for industrial 8-hour shifts.
- Massive 37”-wide and 6”-high maximum capacity.
- Thickness sander with a minimum of ⅛” allows you to tackle a wide range of projects.
- 7.5 hp motor drives 2 steel drums.
- Hard durometer rubber coating on drums ensures a flat, mar-free finish.
- Independently adjustable rear drum makes fine-tuning easy.
- Cast iron table incorporates 4 solid jackscrews.
- Conveyor belt provides a great grip on your material.
- ¼ hp variable-speed feed motor lets you adjust between 3.7 and 14.2 surface feet per minute.
- DRO shows the thickness of your material, so you can reach the exact result you want.
- Dual drums allow you to use 2 different grits at once—first to take off thickness, then to smooth out the finish.
- Quick clamp changeover system for attaching sanding paper to your drums saves you time and effort.
- Our large sander's thick steel base prevents vibrations. Most other companies’ machines are not so heavily and rigidly built.
- Cabinet in the base provides a great place to store your extra belts.
- 2 dust ports can hook up to your dust collector and help maintain high air quality in your shop.
- Large orange safety brake lets you immediately stop the machine when necessary.
- Covered by a 1-year parts warranty.
- Replacement drum sander parts are in stock at our Wisconsin headquarters, so we can get them to you quickly.
- We include lifetime technical support by phone from a team of reps with hands-on machine experience.
