Uncategorized

Home/Uncategorized
  • M1 Oil

    Starrett M1® industrial lubricant produces a micro-thin, airtight coating that simultaneously dries as it protects, avoiding dirt, grime, etc. It dries and will not attract dirt, dust or other contaminants as other leading lubricants do. Features: • Silicone free • Stands up to extreme temperatures • Penetrates quickly to free frozen nuts, bolts and metal parts • Removes grease, tar and grime from metal parts and painted surfaces • Cleans and polishes for lasting protection • Protects metal against rust and corrosion damage • Instant lubrication properties that spread into hard-to-reach areas to stop squeaking and sticking • Gets under moisture to lift it away from the surface • Prevents short circuits in high moisture environments. You are purchasing one can.
  • Out of stock
    Details
    • Advance silicone material for increased comfort and greater durability
    • Proprietary 3M™ CoolFlow™ valve helps makes breathing easier
    • Dual-mode head harness adjusts easily for either standard or drop-down mode
    • Exhalation valve cover directs exhaled breath and moisture downward to reduce fogging
    • Color coded to indicate size (small, medium or large) for easy identificatio

    This half facepiece reusable respirator 7500 Series uses advanced silicone material to help provide comfortable and durable respiratory protection. The 3M™ Cool Flow™ Valve helps make breathing easier and can reduces heat and moisture build-up for cool, dry comfort.

    The 3M™ Half Facepiece Reusable Respirator 7500 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved 3M cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator (commonly referred to as a “mask”) helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). This respirator uses an advanced silicone material that provides a softer feel on the face. A unique adjustment design helps reduce pressure points on the face for even more comfort. The 3M™ Cool Flow™ Valve helps make breathing easier and can offer cooler and drier comfort for the wearer. Head harness may be adjusted to drop down when not in active use (allows respirator to be removed without taking off hard hat). The exhalation valve cover directs exhaled breath and moisture downward while helping protect the valve area from debris while also making for easier cleaning. Recommended applications include abatement, painting, welding, chemical handling, construction, utilities, mining, pharmaceutical, and smelting. NIOSH, a Federal government regulatory agency, has tested and approved the 7500 Series with 3M™ cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. This half facepiece respirator may be used with 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™ Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ half Facepiece Reusable Respirator 7500 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.

  • Out of stock
    Details
    • Advance silicone material for increased comfort and greater durability
    • Proprietary 3M™ CoolFlow™ valve helps makes breathing easier
    • Dual-mode head harness adjusts easily for either standard or drop-down mode
    • Exhalation valve cover directs exhaled breath and moisture downward to reduce fogging
    • Color coded to indicate size (small, medium or large) for easy identificatio

    This half facepiece reusable respirator 7500 Series uses advanced silicone material to help provide comfortable and durable respiratory protection. The 3M™ Cool Flow™ Valve helps make breathing easier and can reduces heat and moisture build-up for cool, dry comfort.

    The 3M™ Half Facepiece Reusable Respirator 7500 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved 3M cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator (commonly referred to as a “mask”) helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). This respirator uses an advanced silicone material that provides a softer feel on the face. A unique adjustment design helps reduce pressure points on the face for even more comfort. The 3M™ Cool Flow™ Valve helps make breathing easier and can offer cooler and drier comfort for the wearer. Head harness may be adjusted to drop down when not in active use (allows respirator to be removed without taking off hard hat). The exhalation valve cover directs exhaled breath and moisture downward while helping protect the valve area from debris while also making for easier cleaning. Recommended applications include abatement, painting, welding, chemical handling, construction, utilities, mining, pharmaceutical, and smelting. NIOSH, a Federal government regulatory agency, has tested and approved the 7500 Series with 3M™ cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. This half facepiece respirator may be used with 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™ Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ half Facepiece Reusable Respirator 7500 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.

  • Out of stock
    Dado Insert for 10-205
    • For use with 10-205
    • Great for use with dado set
    • Allows for minimum clearance from dado blade
    • Steel Construction
  • Out of stock
    The Bessey Portable Mini Vise Clamp is ideal for holding round, rectangular and odd shaped objects.
    It has glue resistant jaws and can be clamped to a work surface with Bessey TK 6 table clamps.
    Bessey TK6 clamps are included w/ S10
     
  • $39.90
    Modern, low profile ergonomic half mask comes with twin P3 HEPAC pleated filters already fitted. Grille covers the entire filter surface area deflecting particulates & moisture away. Material is odor-free and non-allergenic, with latex and silicone-free face seals. Less clogging pressure and inward leakage.•Highest filtration efficiency at 0.3 microns - 99.999% offering protection against wood dust, silica dust, weld fumes, asbestos, oils, mists, aerosols. •Lowest breathing resistance of any half mask on the market for maximum comfort & less condensation build-up. •Sleek unobtrusive design to accommodate visors, helmets, spectacles/goggles & other PPE. •Large downward facing exhaust for non-misting or steaming of goggles. •Latex & silicone-free TPE medical grade face seal so it can be worn for 8+ hours•Assigned Protection Factor:APF20
    Specify size at check out. Medium/Large  Small/Medium Case & replacement filters sold separately.
  • Out of stock
    Details

    Part of our Pro Series, the 3M™ Respirator with Cool Flow™ Valve 8511 is designed with the pro in mind to help bring you protection and comfort. Our most popular valved disposable respirator, it is equipped with a Cool Flow™ valve, which helps reduce heat build-up inside the respirator, helping to enhance your comfort during longer jobs. This N95 respirator features Advanced Electrostatic Media that enhances the capture of airborne particles while allowing you to breathe easier. An adjustable M-noseclip helps provide a secure, custom seal. Whether you're hanging drywall or sanding a floor, rely on the trusted protection of the 3M™ Respirator with Cool Flow™ Valve 8511.

    • NIOSH-approved N95 for at least 95 percent filtration efficiency against solid and liquid aerosols that do not contain oil
    • Recommended for relief from dusts and certain particles encountered during sanding projects (bare wood, non-lead painted surfaces, or drywall), grinding, sawing, sweeping, installation of fiberglass insulation
    • Helps filter pollen, mold spores and dust particles encountered during outdoor activities such as gardening, cutting firewood, raking, and mowing
    • 3M™ Cool Flow™ Valve helps reduce heat build-up inside the respirator
    • Breathe 30% easier* 10 degrees F cooler**
    • Adjustable M-noseclip helps provide a secure, custom seal
    • Convenient, disposable design
    • Lightweight design for comfort
    • Stretchable, woven headbands
    • Contains no components made from natural rubber latex
  • Out of stock
    Details

    Part of our Pro Series, the 3M™ 8511 Respirator with Cool Flow™ Valve is designed with the pro in mind to help bring you protection and comfort. Our most popular valved disposable respirator, it is equipped with a Cool Flow™ valve, which helps reduce heat build-up inside the respirator, helping to enhance your comfort during longer jobs. This N95 respirator features Advanced Electrostatic Media that enhances the capture of airborne particles while allowing you to breathe easier. An adjustable M-noseclip helps provide a custom, secure seal. Whether you're hanging drywall or sanding a floor, rely on the trusted protection of the 3M™ 8511 Respirator with Cool Flow™ Valve.

    • NIOSH-APPROVED N95 for at least 95 percent filtration efficiency against certain non-oil-based particles and aerosols
    • 3M™COOL FLOW™ VALVE helps reduce heat build-up inside the respirator
    • BREATHE 30% EASIER*
    • ADVANCED FILTER MEDIA for easier breathing
    • ADJUSTABLE M-NOSECLIP helps ensure a custom, secure seal with fewer pressure points
    • STRETCHABLE, BRAIDED HEADBANDS for comfort
    • LIGHTWEIGHT DESIGN for comfort
    • COMFORTABLE for long periods of wear
    • CONVENIENT, DISPOABLE DESIGN
    • RECOMMENDED FOR relief from dusts and certain particles encountered during sanding projects (bare wood, non-lead painted surfaces, or drywall), grinding, sawing, sweeping, installation of fiberglass insulation
    • ALSO HELPS FILTER pollen, mold spores and dust particles encountered during outdoor activities such as gardening, cutting firewood, raking, and mowing
    • Contains no components made from natural rubber latex
  • Out of stock
    • 3 sleeves per pack
  • Out of stock
    • 3 sleeves per pack
    • ANCHORSEAL 2 is a hybrid of plant-based polymers and wax that protects the ends of green logs and lumber from end checking and splitting. AS2 controls the rate of moisture loss during air drying for hardwood, exotic hardwood decking and softwood. It is a high-performance, economical choice for sealing green wood and fresh cut lumber. ANCHORSEAL 2 is best-in-class for the protection of deck end cuts for exotic hardwood species. When carefully applied to the freshly cut ends of tropical hardwoods, such as ipe, Brazilian cherry, mahogany, teak, cumaru & tigerwood, AS2 prevents up to 90% of end checking, protecting your investment and extending the life of the deck. It is also a preferred end grain sealer of the woodworking industry for wood bowls, turning blanks, cookies & live-edge wood slabs. Features: Prevents up to 90% of end checks and drying splits on logs and freshly cut lumber • Hybrid formula combines wax with natural plant-based polymers • Can be applied to all species of hardwood or softwood • Helps prevent blue stain and sapstain caused by damaging fungi • Water based, non-toxic formula, soap & water clean-up • Available in clear or more than 35 colors • Winterized formulas available Coverage: 100 sq. ft./gallon, depending on application method and wood species. Surface Preparation
      • All areas to be coated should be clear of dirt and debris
      Application
      • Apply ANCHORSEAL 2 using a brush, roller or sprayer until it begins to drip slightly
      • For optimal coverage, use a gas engine, electric, air operated or backpack sprayer from U·C Coatings
      • If using spray equipment other than those sold by U·C Coatings, use 0.21”/0.55 mm tip or larger
      • Logs larger than 24”/60 cm in diameter will require a heavier coating, or two coats must be applied within a 15 minute period
      • If applying to the cut ends of deck boards: apply ANCHORSEAL 2 carefully with a thin brush or sponge applicator. To avoid potential staining, do not allow ANCHORSEAL 2 to get on the face of the boards.
      • If you need a deck end cut sealer that penetrates below the surface of wood that can be painted or stained over, we recommend SEAL ENDS ONCE (also made by U-C Coatings)
      Cleanup & Storage
      • Clean application equipment using hot soapy water
      • Store unused ANCHORSEAL 2 above 50°F/10°C to prevent freezing. Winterized formulas will protect against freeze damage
  • Out of stock
    • The riving knive helps reduce kickback on the table saw
    • The low profile allows you to make non thru cuts and pass the wood directly over the knife
    • This thin kerf riving knife llows you to use even the thinnest blades to reduce the kerf waste.
  • This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a in glue line in precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4 In. to 2-3/4 In. thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers. Premium TiCo™ Hi-Density carbide ripping blend for maximum performance Extra large, flat tooth design leaves a smooth finish without the need for sanding or jointing Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish Specifications Brand Freud Tools Manufacturer Part Number LM72M010 Model LM72M010
  • Out of stock
    Features:
    • The 4-piece Tab-Loc insert ring set is a convenient and versatile solution to changing the bit-hole diameter in all JessEm router plates and lift systems.
    • Easily change the bit hole diameter in your JessEm router plate
    • Precision machined from solid 1/4-inch thick phenolic; pre-drilled center holes of, 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2", 1-3/4" and 2-1/4"-inch diameters
    • Designed to be used in JessEm Tool router table insert plates and router lifts
  • The Delta 1344257 Handle Assembly is a genuine Crank Handle compatible with Delta models: 11-980 Type-1, 11-985 Type-1, 11-990 Type-1, 11-990 Type-2, 11-990 Type-3, 14-040 Type-1, 14-070 Type-1, 17-900 Type-1, 17-900 Type-2, 17-925 Type-1, 17-925 Type-2, 17-925 Type-3, 17-965 Type-1, 17-965 Type-2, 17-968 Type-1, 17-990X Type-1, DP200 Type-1, DP250 Type-1, DP300 Type-1, DP300L , DP350 , DP350 Type-1 and DP400 Type-1. This part is compatible with the Black and Decker SM300 Type-1 10 Drill Press. This handle does not include the set screw for securing it in place. After nearly 90-years of expertise in the woodworking business, Delta Power Equipment Corporation has become one of the most revered brands in woodworking tools today.
  • Out of stock
  • AXD001004   Improved, high airflow, cyclone design stops over 99% of fine dusts and bulk debris from clogging your vacuum's filter - eliminating suction loss while saving you time and money on expensive replacements! DIY kit is perfect for building your own dust collection system!
    • The latest and greatest edition of the original dust cyclone!
    • Up to 2x the airflow of smaller cyclones and lid-style separators.
    • Upgrades any make/model shop vacuum with 2.5" hose fittings.
    • Neutral-vane technology improves separation efficiency by 20%.
    • Mounts to any size and type of reinforced, airtight container.
    • Anti-static components significantly reduce the likelihood of static shocks.
    • Backwards compatible 3" ID flange makes upgrades quick and easy.
    Proposition 65 WARNING: This product may expose you to chemicals, including Nickel (metallic), which is known to the State of California to cause cancer or birth defects or reproductive harm.
  • Out of stock
  • Folding Leg Assembly for PM2000B
  • Whether you work in a small shop or simply need to keep your workspace flexible, the Bora PM-900 Workbench Caster Kit is the ideal solution to keep your shop mobile.  
    • All-swivel wheels to easily move the bench around small workshops and into tight spaces
    • Non-marking three-inch rubberized wheels provide a smooth roll over cords and uneven floors
    • Each wheel has 155-lb. weigh capacity — up to 50 lbs. more per wheel than most other caster kits
    • Supports up to 620 lbs. total
    • Heavy-duty foot lever mechanism from Bora’s popular mobile base lineup delivers proven performance
    • Bracket designs can be fitted to virtually any bench
    • Easy to install — make one quick measurement to mark and install the kit with included hardware
    You are purchaing a set of two caters.
  • Out of stock
    • Converts 12-inch planer for dust collection
    • 4-inch Outlet
    • Fits most 4-inch dust collector hoses
    • Provides for a cleaner and safer work area
    • Measures 15 by 10 by 7 inches; weighs 2.7 pounds
  • Out of stock

    Adjustable Feet Lathe for 70-3040

  • Magswitch Universal Featherboard – 8110015 Our best selling Universal Featherboard is designed to work on any cast-iron fence to hold down your work, so you don’t have to. It works on both sides of the blade and even the fence. It features (2) 20mm Magswitch magnets. Features
    • Works to improve your cutting results on either side of the blade.
    • Versatile — no miter slot limitation.
    • Perfect for infeed/outfeed applications.
    •  Can be used on the left or right side of the blade.
    • Precise, fast setup.
    • Easy On/Off Operation.
    • Great for small tables.
  •  
    • 8" Dado Set, 5/8" Arbor
    • Does not need dado set or saw blade
    • Features Premium TiCo™ HI-Density Carbide Crosscutting Blend for Maximum Performance
    • Silver I.C.E. Coating prevents build up on the blade surface and keeps the blade running cooler and cleaner
    • All blades and chippers come with Freud’s anti-kickback design
     
    • Genuine Delta product
    • Fits these  Delta air cleaners: tAP200, 50-860, 50-868 and 50-875 
    • 1 Micron
    • Tool-free installation process
    • Filter measures 23.75 x 11.75 x 2 inches
    • Includes one filter
  • Out of stock
  • The Freud D1208DH's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.087-inch kerf between the blade's eight TCG (triple-chip grind) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time. An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.
  • With a lifetime guarantee, Laser cut arbor, laser cut stabilizer vents, and MicroGrain Titanium Carbide come Included with (5) D0824X Diablo 8-1/4-inch 24 Tooth ATB Thin Kerf Framing Saw Blades are Ideal for framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding. With an adanced laser cut thin kerf for improve precision, accuracy, and longer cutting life. Includes (5) D0824X Diablo Framing Saw Blades with 5/8-inch Arbor.
  • This Tenryu GM-30560 gold medal precision table saw blade is 12-inch in diameter and has a 1-inch arbor and is ideal for woodcutting and is one of the premier manufactueres of saw blades in the world. Use this blade for rip cuts, miter cuts, cross cuts and cut-offs. Woodworkers wiil love the super smooth cuts on hardwood, plywood, softwood and composites.  
  • The M18™ TOP-OFF™ 175W Power Supply & M18™ REDLITHIUM™ XC5.0 Battery Pack set delivers faster simultaneous power to personal devices and small electronics. Attach this portable power supply to any M18™ battery (M18™ REDLITHIUM™ 5.0AH Battery not included) to provide continuous power or recharge devices with (1) AC 120V outlet, (1) USB-C PD port, and (1) USB-A port. You can quickly charge up to three devices at once, without the barriers of speed throttling. With the USB-C PD port (45W), this battery inverter can recharge devices from a fully depleted state to 80% capacity, up to 75% faster than conventional wall chargers (5W). The MILWAUKEE® M18™ TOP-OFF™ 175W Power Supply has an attached metal rafter hook that extends to hang it from carts, lumber, or other jobsite materials when worksurface space is limited. You can instantly set up a mobile workstation or keep electronics securely within eyeshot, rather than making frequent trips to a wall outlet.
  • Out of stock
    • Provides work support for longer sanding applications
    • Fits JET 22-44 Plus Drum Sanders
    • Aluminum table construction
    • Each table is 23-1/2" wide by 10" deep
    • 90 day warranty
  • Durable MicroGrain Titanium Carbide teeth for razor-sharp cuts and long life. Perma-SHIELD® permanent coating prevents gumming and corrosion. Laser-cut thin kerf design gives fast & clean cuts. Laser-cut stabilizer vents give reduced vibration and precise cuts. Covered by Freud®'s Limited Lifetime Warranty. Freud® Part No. D0740A Dia. 7 1/4" No.Teeth 40 ATB Arbor: 5/8" Kerf: 0.590!0