- Heavy-gauge steel and features a foot-operated control lever that raises and lowers the base for easy movement and positioning
- For UNISAWS with 50-inch/52-inch Fences
- 20-5/8-inch by 20-5/8-inch Combines 50-273 and 50-284
- Mobile base for Older Unisaws PRE-2009 with 52-Inch fence assembly, 1 crank handle mounted on front and other handle mounted on the side of the cabinet.
- Mobile machine base includes base, control lever, and adjustable foot pads
-
The DELTA 50-289 mobile machine base for Unisaw lets you easily and safely move your machines out of the way when not in use, so you'll be able to maximize the space in your shop. The 50-289 fits DELTA Unisaws with 52-inch Unifence and adds rolling portability. The mobile machine base features a foot-operated control lever that lets you easily raise and lower the base for either moving or locking it in place. When lowered into position, the base has adjustable foot pads to ensure even contact with the floor. -
-
Out of stock
Model 80-805: 8″ Low Speed Grinder & 80-910 Stand
• Powerful 1/2 HP Motor • Low Speed 1,750 RPM • Adjustable Tool Rests • Adjustable Safety Eye Shield and Spark Resistors
1/2 HP Low Speed Bench Grinder #80-805 has more than enough power for small workshops and for carpenters, turners, carvers and other craftspeople working with hand tools. Its left tool rest includes a groove in its design for the sharpening of drill bits. Wheel flanges are stamped. Grinder includes a diamond faced wheel dressing tool.Model 80-910 Stand
- Adjustable Height 28" - 36" - 2" Diameter Steel post with cast iron base - Storage for two grinding wheels - steel top measures 12" x 9 1/4" with 1/2" wide slots for mounting grinders -
Out of stock
1 HP portable dust collector #60-105 is a great size and adaptable for many uses that a small shop encounters. Single 4 In. dust port draws 660 CFM, more than enough vacuum power for big chip makers, like jointer and planers. Built-in casters and handle make moving it about easy. Features an adjustable pipe extension with chip collecting funnel that can be positioned high for use with lathes, drill presses, workbenches etc. Includes 2 micron cloth filter bag, 108 In. long x 4 In. dust hose, adjustable pipe & funnel attachment system, safety on/off switch, and wall mounting brackets. 1 HP develops 660 CFM 4 In. dust port inlet for attaching to a single machine Includes casters for easy mobility around the shop Includes adjustable pipe & funnel system for dust collection use with lathes, drill presses, workbenches, etc. can be positioned up to 55 In. high. -
The Delta Mobile Base For 36-L336 36 in. UNISAW (For Dual Front Crank Unisaws) is essentially for easily moving your Delta Unisaw. Made from Steel in the US.- Adds mobility to your saw in your workshop
- Adjustable feet provided for leveling saw
- Heavet duty steel, designed specifically for this new Unisaw
-
Out of stock
- Vacuum operating button locks vacuum force
- Twin leveling toggles make surface alignment easy
- Steel threaded spindle is precision machined
- cold drawn profile guide rails for smooth powerful clamping
- Ergonomic grip 2 component handle
-
Out of stock
-
These 28" table legs are perfect to pair with a table top.
These are very heavy duty able to withstand practically any table top you choose to use. The cast aluminum makes these table legs incredibly strong while keeping things to a manageable weight.Specification:
- Height: 28"
- Mounting width: 18"
- Widest Point: 24"
Features:
- Raised Gold Lettering
- Included Threaded Inserts and Bolts
- Cast Aluminum - Like Cast Iron but without the weight.
- Made in The USA
-
The Mast-R-Lift II has 5 double sealed bearings. The lift adds tension to the threaded spindle to remove backlash and vibration, and prevent setting changes while routing. Includes a dedicated locking mechanism for heavy duty, long term routing operations, accessible from the top of the top surface and is engaged with the same crank handle used to raise and lower the Lift. The Mast-R-Lift II also fits most fixed base routers on the market today without the use of an adaptor collar. The unique clamping blocks enable users to use different fixed base routers with the Lift as opposed to dedicating a router. All of our top plates on our Lifts are hard anodized. This is an engineered surface treatment and not just a cosmetic sulphuric treatment that will wear off. The shafts on the Mast-R-Lift II are pressed into a shaft mount with hydraulic pressure, not just threaded to the top plate. -
Out of stock
Use the FS 2700 Guide Rail (106 inches) with the Festool TS Plunge cut saw to make precision cuts up to 100 inches long. - Integrated splinterguard serves as cut line and prevents tear-out and splintering - A fully integrated system, use your Festool routers or jigsaw with the guide rail for expanded capability - Non-skid, dual-clamping rubber strips prevent movement during the cutting operation, saving significant set up time - Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action - SHIPS VIA FREIGHT -
Tormek T-4 – Compact Water Cooled Sharpening System for Edge Tools – US Version – English Handbook- Complete Water-Cooled Sharpening system for Wood Chisels, Plane Irons, Spoke Shaves, Carving Tools, Lathe Turning Tools, Knives, Axes and most edge tools
- Accessories Jigs available to assist you in achieving a better than factory blade edge quickly
- Includes complete instruction manual and easy to follow instructional videos for achieving professional tool sharpening results
- Dual Grit 1-5/8" wide Sharpening Stone turns at just 120 RPM to ensure your blade does not overheat and the steel lose its temper
- Die Cast Zinc top, Impact resistant ABS plastic, Industrial Quality Motor, Stainless Steel Hardware for long life, backed by 7 year warranty, made in Sweden
-
Out of stock
The 6” x 48” Belt / 10” Disc Sander with Stand offers woodworkers the same belt and disc sizes and operating features as the #50-120, but, has a more powerful motor, re-designed base of sturdy, heavy gauge sheet steel, higher positioned disc location, cast aluminum disc table with patented rack & pinion table angle-setting handle system, and it includes a steel stand.- Cast Iron & Steel Construction
- Belt Size 6″ x 48″
- Belt Tilts 0 – 90°
- 10″ Disc Diameter
- Includes: Steel Stand, Work Support Table, Miter Gauge, HEX Wrenches, Convenient Carrying Handles, 1 – 80 Grit Disc and 1 – 80 Grit Belt