Uncategorized

Home/Uncategorized
  • Out of stock
    Delivery in Connecticut between $69 and $89 per ton/pallet based your address. One pallet of Bio Bricks weighs approx. one ton (2000lbs) Please call for delivery outside of Connecticut.   BioBricks offer a number of distinct advantages. They have a uniform rectangular shape, which allows them to be tightly packed into a stove, optimizing fuel levels. These tightly packed bricks burn longer and more uniform.

    One pallet of BioBricks® delivers the same heat as a full cord of wood.

    • BioBricks are ideally sized for wood stoves.
    • Packing density is optimized.
    • This high density fuel extends your burn times greatly.
    • 100% wood, no artificial binders
    • Cost effective, 1 lb of BioBricks equals 1.7 lbs of cordwood
    • Environmentally friendly using our renewable resources
    • Clean burning – minimal smoke, creosote and ash
    • Lights with newspaper, no mess, no chopping, no bugs
    • Easy to handle 38 – 42 lb packs with 50 packs per pallet
    • BioBricks from BioPellet, LLC lessens our dependence on foreign oil
    • Safely and easily stores inside or outdoors (UV pallet cover)
    • Pallet size approximately 4x4x3 and is easily stackable
    • Average burn time of 12 hours per stove fill
    • Uniformity in size, density and moisture ensures predictable burning each time

    BioBricks produce 1/2 the particulates (smoke) compared with good cordwood:

    • "58% reduction in particulate emissions!" Read more >>
    • "Replacing normal firewood with [densified wood] firelogs can be an effective means of reducing pollutant emissions from existing fireplaces...Pressed wood firelogs offer the potential to lower woodstove and fireplace emissions." Houston, James T., 1999, Louisiana State University Master's Thesis, The Development of a Firelog With Improved Air Emissions"
    • Results show an average reduction of 52% in [Particulate Matter] grams per hour emissions overall...[Carbon Monoxide] emissions were more modestly reduced by 27%, and [Volatile Organic Compounds] were reduced 39%." "...even the worst performing firelog had only 29% of the worst wood fuel emissions and 74% of the cleanest wood fuel." Barnett, Bighouse, 1992, OMNI Environmental Services, Inc.,  In-Home Demonstration of the Reduction of Woodstove Emissions from the Use of Densified Logs
    • "The overall average PM [particulate emissions] for all 9 stoves using cordwood were 24 g/hr.  Using [densified logs] the emissions averaged 12 g/hr for an average reduction of 52%" Hayden, Braaten, 1991, ERL/CANMET, Ottawa Ontario, Reduction of Fireplace and Woodstove Emissions Through the Use of Manufactured Firelogs
    Delivery in Connecticut between $69 and $89 per ton/pallet based your address. One pallet of Bio Bricks weighs approx. one ton (2000lbs) Please call for delivery outside of Connecticut
  • Sale!
    The G0701 19" Ultimate Bandsaw is made for production work with its large cutting capacities, foot brake, resaw fence and motorized upper blade guide. The 5 HP motor powers through wood at a maximum 19-1/2" cutting capacity and the 18-3/8" throat is big enough for most applications. No more cumbersome two-handed height positioning! Simply toggle the switch up or down for motorized blade guide adjustments. The G0701 has an extra-wide 28" x 24" cast-iron table that can tilt from 5° left to 45° right. The cast-iron fence includes an extruded-aluminum resaw fence that attaches quickly and supports tall stock exceptionally well. The cast-iron table trunnions add additional weight for greater stability. You'll also appreciate the computer balanced cast-iron wheels with rubber tires for the smoothest operation possible, blade tension gauge and rack and pinion table tilt adjustment.   Made in an ISO 9001 factory CSA certified

    SPECIFICATIONS:

    • Motor: 5 HP, 230V, single-phase, 22A
    • Guide post motor: Universal DC, 40W
    • Cutting capacity/throat: 18-3/8"
    • Maximum cutting height: 19-1/2"
    • Table size: 28" x 24"
    • Table tilt: 5° left, 45° right
    • Floor to table height: 35-1/4"
    • Blade size: 166–168" long
    • Blade width range: 3/8 – 1-3/8"
    • Blade speed: 4975 FPM
    • Footprint: 31" x 23-1/2"
    • Overall size: 86-1/2" H x 36-5/8" W x 33" D
    • Approximate shipping weight: 810 lbs.
  • Outer Pleated Filter (5 micron) for 62-400
    • For use with 62-400
    • Filter size: 9-1/2″ x 16-1/2″ x 1″
    • 5 Microns
    • Cardboard frame
  • Out of stock

    JET JSG-6DC 6"x48" Belt / 12" Disc Benchtop Sander, 1-1/2HP, 1Ph 115/230V (708599)

    About this item

    • VERSATILITY: Precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles.
    • LONGER LIFE: Graphite-covered steel platen runs cooler, increasing machine and belt life.
    • EFFICIENCY: 4" dust port on the back of the base collects dust effectively from both the belt and disc.
    • POWERFUL: 1-1/2 HP motor easily handles the toughest sanding operations.
    • PORTABILITY: Built-in handles make machine relocation easier.
  • Out of stock

    Product details

    Brand Powermatic
    Item Dimensions LxWxH 43 x 44 x 43 inches
    Grit Type Medium
    Voltage 230 Volts
    Power Source Corded Electric
    Amperage Capacity 5 Amps
  • G1183 6" x 48" Belt/12" Disc Combo Sander

    Built to the scale and level of quality professional woodworkers and metalworkers demand.

    The heavy-duty G1183 6" x 48" Belt/12" Disc Combo Sander features a sanding belt that operates horizontally, vertically or at any angle in between. The sanding belt speed is 5000 FPM and the disc speed is 3450 RPM. Both cast-iron tables tilt for any job. The belt sander table tilts 90° while the disc sander table tilts 30° left and 45° to the right. The convenient, quick-release lever makes tension adjustment and belt changes and a snap. There is a full range of replacement sanding belts and sanding discs for the G1183. Belt rollers have shielded ball bearings and the top roller has a fine-tuning knob for precision tracking. The base accepts 5/8" fasteners for mounting to workbench. Like all Grizzly combination sanders, the G1183 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G1183 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your sander. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the combination sander may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory

    SPECIFICATIONS:

    • Motor: 1 HP, 110V/220V, single-phase, 12A/6A
    • Sanding belt size: 6" x 48"
    • Sanding belt speed: 5000 FPM
    • Belt platen size: 6" x 14-1/2"
    • Belt table size: 7" x 12-1/2"
    • Disc diameter: 12"
    • Disc backing type: PSA
    • Disc speed: 3450 RPM
    • Disc table size: 7" x 16-1/2"
    • Table tilt 30° L, 45° R
    • Number of dust ports: 2
    • Dust port sizes: 2-1/2", 3"
    • Footprint: 17" x 14"
    • Overall dimensions: 32-1/2" W x 16-1/2" D x 29-1/2" H
    • Approximate shipping weight: 148 lbs.

    FEATURES:

    • Quick belt release
    • Disc table positive stops at 90°
    • Belt table positive stops at 45° and 90°
    • Two cast-iron tables
    • Top roller has fine tracking knob
    • Miter gauge included
  • 1-1/2 Horsepower 6" x 79" Wood Edge Sander with Extra Large Tables

    This 6" x 79" Edge Sander will shift your expectations of what an edge sander should be. The pivoting motor and platen design makes horizontal-to-vertical position changes a breeze, and with 3-1/2" of vertical edge-table travel and the ability to tilt both edge-table and end-table from 0-45°, you'll have all the angles covered. The 6" x 79" belt rotates around a 2-3/4" end roller for tight radius sanding, and belt tracking and tension are easily adjustable with conveniently located lock knobs.
  • Out of stock

    Adjustable Feet Lathe for 70-3040

  • Specifications

    • Max. workpiece width: 48"
    • Bending capacity at full width: 18 ga. mild steel
    • Bending capacity at half width: 16 ga. mild steel
    • Brakes: 0-135°
    • Box fingers: 2" (x5), 3" (x6), 4" (x5)
    • Footprint: 52" x 12-1/2"
    • Max. height of pan/box brake sides: 2-1/2"
    • Brake steel with hardened edge
    • Approximate shipping weight: 383 lbs
  • Out of stock
    tem Number IP-156-HH
    Shipping Weight 600lbs
    Table Size (Length) 48"
    Table Size (Width) 15"
    RPM 5000
    Maximum Depth of Cut (Resaw) 1/8"
    Cutter Head Diameter 3"
    Max Stock Width 15'
    Maximum Stock Height 6"
    Minimum Stock Thickness 3/16"
    Minimum Stock Length 6"
    Feed Speed 16/20 FPM
    Table Elevation Manual
    Power 220V Single Phase
    Horse Power 3
    Weight (lbs) 520
    Number of Inserts 68
    Insert Rows 4
    Shipping Dimensions (Inches) 60x44x52
  • Out of stock
     
    • Built for industrial 8-hour shifts.
    • Massive 37”-wide and 6”-high maximum capacity.
    • Thickness sander with a minimum of ⅛” allows you to tackle a wide range of projects.
    • 7.5 hp motor drives 2 steel drums.
    • Hard durometer rubber coating on drums ensures a flat, mar-free finish.
    • Independently adjustable rear drum makes fine-tuning easy.
    • Cast iron table incorporates 4 solid jackscrews.
    • Conveyor belt provides a great grip on your material.
    • ¼ hp variable-speed feed motor lets you adjust between 3.7 and 14.2 surface feet per minute.
    • DRO shows the thickness of your material, so you can reach the exact result you want.
    • Dual drums allow you to use 2 different grits at once—first to take off thickness, then to smooth out the finish.
    • Quick clamp changeover system for attaching sanding paper to your drums saves you time and effort.
    • Our large sander's thick steel base prevents vibrations. Most other companies’ machines are not so heavily and rigidly built.
    • Cabinet in the base provides a great place to store your extra belts.
    • 2 dust ports can hook up to your dust collector and help maintain high air quality in your shop.
    • Large orange safety brake lets you immediately stop the machine when necessary.
    • Covered by a 1-year parts warranty.
    • Replacement drum sander parts are in stock at our Wisconsin headquarters, so we can get them to you quickly.
    • We include lifetime technical support by phone from a team of reps with hands-on machine experience.