- 10 gauge mild steel sheet metal maximum capacity.
- Bends across its full 8-foot (96”) working width.
- 1” beam adjustment.
- Maximum bend angle of 135°.
- Industrial-grade hydraulics will make precise and efficient bends, day in, day out, for decades.
- 5 hp motor runs on 220-volt 3 phase power.
- Hydraulic system clamps the material via dual hydraulic motors, then lifts the bending leaf with industrial hydraulic cylinders.
- Adjustable bend auto-stop simplifies production runs; just dial in your desired degree.
- Foot pedal and toggle joystick controls let you operate this hydraulic sheet metal brake in manual or semi-automatic mode.
- Includes 22 hardened 3-piece fingers (6 of 3", 4 of 4", 10 of 5" and 2 of 6" ) to create many different size boxes.
- 6” box depth maximum.
- Fully-welded steel beam and bending leaf, supported with truss rods, prevent twisting and deflection—important when you’re bending heavy 10 gauge mild steel.
- Baileigh covers this hydraulic box and pan brake with a 1-year parts warranty.
-
Out of stock
The BB-9610H hydraulic sheet metal brake adjusts to fit the gauge you’re bending and produces uniform bends. -
Out of stock
The BB-9612H hydraulic box and pan brake can bend 12 gauge mild steel (or lighter) across its full 8-foot (96”) width.- 135° maximum bend angle.
- Comes standard with 22 fingers (6 fingers of 3”, 4 of 4”, 10 of 5”, and 2 of 6”) that you can adjust to make different sizes of boxes and pans.
- Powerful industrial-grade hydraulics lift the leaf and lift or clamp the beam.
- You can run this hydraulic sheet metal brake in manual or semi-automatic mode via toggle or foot pedal controls.
- Adjustable bend auto-stop, for easy and exact repeatability, makes this a very production-oriented hydraulic sheet metal brake.
- Apron angle bar detaches to let you get closer between bends.
- Electro-welded beam and leaf, stabilized with truss rods, minimizes deflection when you’re bending at full capacity and keeps bends crisp and accurate.
- Covered by a 1-year parts warranty.
- We typically keep replacement parts in stock for fast deliveries.
- Includes lifetime technical support by phone. Call up our knowledgeable team of reps whenever you need project advice or help related to this sheet metal finger brake.
-
Out of stock
This finger brake can bend 10 gauge mild steel across its 48” (4-foot) length. A welded steel frame prevents misalignment and ensures accuracy.- Runs on 220-volt 3-phase power.
- Powerful 3 hp motor controls all the hydraulic functions.
- 1” beam adjustment.
- Maximum bend angle of 135°.
- Includes 11 fingers (3 fingers of 3”, 2 of 4”, 5 of 5”, 1 of 6”), allowing you to adjust for different size boxes and pans you want to make.
- Industrial-grade hydraulics lift the leaf for clean, precise motion.
- Adjustable bend auto-stop makes it easy to produce repeatable bends.
- Removable bending support lets you get closer between bends.
- Fully-welded beam and bending leaf, stabilized with truss rods, minimizes any deflection when bending at full capacity.
- You can operate this hydraulic brake in manual or semi-automatic mode.
- Hydraulic motor turns a cam to lift and clamp the beam when bending 10 gauge mild steel.
- Baileigh backs this hydraulic box and pan brake with a 1-year parts warranty.
-
Out of stock
This machine’s 13-foot length lets you bend unusual shapes from 4 x 8 sheet of metal with room to spare, even on corner-to-corner bending.- Maximum capacity of 22 gauge mild steel.
- Over 13-foot (157”) overall bend length.
- Bend angle of up to 135°.
- You can set up the fingers to do multiple bends along the length of the brake.
- 33 interchangeable fingers of varying lengths (6 fingers of 3", 6 of 4", 10 of 5", 11 of 6") allow you to make just about any size box or pan up to a 6” box depth.
- Fully-welded heavy steel framework enables this metal finger brake to handle its full capacity, day in, day out, for years—without twisting or distortion.
- 2 large counterweights minimize physical strain and help the operator easily bend at full length.
-
Out of stock
The PR-514 is the perfect plate roll for small and medium applications. It comes standard with time-saving features, like a DRO, foot pedal controls, and an additional hydraulic motor.- 5' working width.
- 14 gauge mild steel capacity across its full width.
- 2 hp 220-volt single-phase motor transfers power directly to the driven rolls.
- Second hydraulic motor controls the movement of the back roll.
- Remote control pedestal includes foot pedal controls and the buttons for advancing or retracting the back roll position.
- Digital readout displays back roll position so you can repeat bends easily.
- DRO is positioned at the head of the machine, giving you a good line of sight no matter where you’re standing.
- Rigid steel frame, machined to exacting tolerances, helps prevent deflection.
-
Out of stock
This box brake’s welded steel frame allows for a large capacity—without the twisting you’ll get from many competing metal brakes. The BB-14418 will provide years of trouble-free use.- 18 gauge mild steel and 22 gauge stainless steel maximum capacity.
- Bends sheet metal across its entire 12-foot (144”) length.
- 135° maximum bend angle.
- Includes 31 interchangeable fingers of varying lengths (6 fingers of 3", 6 of 4", 10 of 5", 9 of 6" ).
- You can make just about any size box or pan imaginable up to a 6” box depth.
- 2 large counterweights help the operator bend at full length and capacity without straining.
- Electro-welded steel construction enables this sheet metal brake to handle its maximum capacity while maintaining accuracy.
-
Out of stock
Built with a 2 hp motor, hydraulically controlled back roll, and a steel frame, this electrical plate roller lets you tackle thicker gauges without getting bogged down. It comes with a DRO.- 4’ forming width.
- Bends 13 gauge mild steel over its whole width.
- 2 hp motor runs on 220-volt single-phase power, so you can use it almost anywhere.
- Convenient control pedestal has forward and reverse foot pedals and buttons to control the up and down movement of the back roll.
- Industrial-grade hydraulic system allows the back roll to move up and down and tilt left and right for coning.
- Digital readout gives the position of the back roll for easy repeatability.
- Full steel frame, machined to exacting tolerances, maintains accuracy for many years of use at full capacity.
- Includes 3 wire grooves for forming rings.
- Emergency stop cable on the front and back of the machine for safety.
-
Out of stock
This box brake can bend metal along its 10-foot width without twisting. You can bend 4 x 8 sheets at 45°, perfect for adding a stiffening rib to support long duct pieces.- Maximum capacity of 14 gauge mild steel and 18 gauge stainless steel.
- 10-foot (120”) length enables your shop to take on a wide range of projects.
- Bends up to 135°.
- Heavy-duty truss rods support the apron to reduce flex on maximum capacity bends.
- Electro-welded all-steel framework keeps this metal brake accurate over decades of daily use at full capacity.
- 26 fingers of varying sizes (6 fingers of 3", 4 of 4", 10 of 5", 6 of 6") allow you to bend boxes and pans up to 6” deep.
- You can set up the individual hardened fingers for straight bending or box and pan configurations.
- Apron shafts ride in precise oilable bearings, maintaining tight bend tolerances and minimizing operator fatigue.
- 2 massive counterweights make it easy to bend at maximum capacity and reduce physical strain.
- Massively-built sheet metal finger brake weighs in at almost 3500 lbs.
-
Out of stock
The HB-12016 sheet metal hand brake can fit an 8-foot sheet corner to corner, opening up wider project possibilities.- Sheet metal hand brake bends16 gauge mild steel across its full 10-foot length (120”).
- Maximum bend angle of 135°.
- Top beam and bending leaf made from fully-welded plate steelprevents this hand sheet metal bender from flexing and ensures accurate bends.
- Steel support rods stabilize the machine.
- 2 heavy duty counterweights assist the operator and the reduce effort of bending full sheets.
- Comes standard with a stop rod to help you easily make repeatable bends for production runs.
- Main pivots, supports, and clamp levers are made from high-quality cast iron, then machined to exacting tolerances.
- Fully-welded steel stand can bolt to the floor for even more stability.
-
Out of stock
This manual brake’s top beam and support trusses—made of fully-welded steel plate—will keep bends accurate at full capacity.- Bends 12 gauge (or lighter) mild steel.
- 8 feet (96”) long.
- Maximum bend angle of 135°.
- Blade, precisely machined to exacting tolerances, produces the tightest possible bend radius.
- Steel floor stand sets the beam at a comfortable working height and stabilizes the machine during the bending process.
- Made from the finest quality components, including heavy cast iron clamp handles, to maintain rigidity.
- Comes standard with a stop rod, so you can easily make repeated parts and bends.
- Plate steel bending leaf, with integrated side pivots, uses bushings to help the machine last for many years and wear well.
- 2 heavy duty counterweights allow you to effortlessly bend at maximum capacity.
-
Out of stock
This metal brake’s heavy-duty steel frame can bend 8-foot-wide sheet metal without trouble or distortion.- Manually-operated straight brake.
- Bends 16 gauge (or lighter) mild steel sheet metal with ease.
- Bend angle of up to 135°.
- 8 feet (96”) long.
- Bending leaf includes a removable apron to reduce distance between bends, if needed.
- Easily-adjustable material thickness wheels let you get the tightest bend possible with lighter materials.
- Fully-welded frame and support rods keep alignment correct during the bending process, even at maximum capacity.
- Comes with 2 large counterweights to save you effort and physical strain when bending.
-
Out of stock
The BB-5016F-DS sheet metal bending brake incorporates segmented fingers on the top and lower lifting beams to make unusual bends that a standard box brake can’t do. Order this 16 gauge box and pan brake from Baileigh Industrial.- 50” length.
- 16 gauge mild steel maximum capacity box and pan brake.
- You can clamp the material with the foot pedal, so that both hands are free for positioning the sheet metal.
- Segmented fingers on the lower lifting beam let flanges and flaps hang down while still allowing you to get close to the bend line.
- Adjustable stop rod helps you make repeatable parts for production runs without difficulty.
- Simple blade gap adjustment lets you work on various gauges of sheet metal.
- Spring-loaded cylinder assists in lifting the apron, saving effort for the operator.
- Hardened fingers and bending die will last through years for productive use.