-
The 18|CX Bandsaw follows in the traditions of high-performance and reliability established by the widely-used Laguna Tools 14|12 and 14|bx models. The 18|CX is built around a 1.75HP, 110V motor and 145” (368 cm) blade for consistent results, cut-after-cut, regardless of material. -
Delta’s 36-L336 left tilt cabinet saw is ideal for woodworking, cabinet making, and boat building. It features up-front dual-crank controls with locking cams, speedometer style scales and a 36 inch Biesemeyer fence. The 3 HP 230V motor cuts hardwoods and engineered products like MDF and melamine. The riving knife enables tool-less adjustment for through- and non-through cuts including grooves for shelves and picture frames as well as dadoes, rabbets, and cheek cuts for furniture. The single-cast trunion provides increased vibration control. Largest throat plate in category eases blade changes. Storage under the table board is convenient and expandable. Bi-level dust extraction improves dust collection.- Bi-Level Dust Extraction for improved dust collection
- Single-Cast Trunnion System provides increased accuracy
- Sure-Lock Dual Front Cranks provides convenient access to dual front cranks
- Precision Bevel Gauge for ease of visibility; Tool-Free Split Guard for improved blade line of sight
-
- Standard Equipment
- Zinc plated 1¾”steel guide tubes.
- 4 Nylatron roller bearing systems.
- Milwaukee Tool Motor
- Adjustable vertical and horizontal rulers.
- Quick change from vertical to horizontal cutting.
- Thin material pressure guard.
- Injection-molded plastic material rollers.
- Spring loaded counter balance system.
- Integrated dust collection bonnet.
- Extended warranty.
- TUV certified to UL/CSA standards
- Standard Equipment
-
Out of stock
Style (Type) Cabinet Blade Diameter (In.) 10 Arbor Diameter (In.) 5/8 Arbor Speed (RPM) 4300 Maximum Depth of Cut (In.) 3 Maximum Depth of Cut at 45 Degrees (In.) 2-1/8 Maximum Rip Left of Blade (In.) 13 Maximum Rip Right of Blade (In.) 50 Table in Front of Saw Blade at Maximum Depth of Cut (In.) 10 Maximum Diameter of Dado (In.) 8 Maximum Width of Dado (In.) 13/16 Table Type Cast Iron Table Size (L x W) (In.) 29 x 20 Table Size with Extension (L x W) (In.) 29 x 42 Miter Gauge Type Deluxe Dust Collection Minimum CFM Required (CFM) 350 Dust Port Outside Diameter (In.) 4 Motor Power (HP) 5 -
Out of stock
-
Out of stock
The 18” Bandsaw #10-347 has one of the most powerful motors in the line, 4HP with 19″ of re-saw capacity, which makes it ideal for woodworkers doing a lot of heavy re-saw work. Professional features include patient pending spring loaded tool-less guide system, massive cast iron table with quick adjust trunnion system, substantial quick adjust 6” tall rip fence system, key activated safety on/off switch, micro safety on/off switch activated door & foot brake. Under the top door blade tension release levers with blade tension hand wheel are easy to access from the front of the saw. -
Out of stock
The Saw Trax Full Size 1000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 1052 features a 52″ vertical cut. This series includes an accessory package recommended for most general wood workers. This 1000 series are ideal for customers that need a vertical panel saw to perform precision cuts in sheet goods that are less than 1 ¾ inches thick.- Full Size 120" Wide Frame
- Makita 5007F 7.25" saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
Out of stock
The Saw Trax Compact Varsity features big machine cutting capabilities in a smaller size frame. Compact frames are perfect for space restricted shops or for taking to the job site. The Varsity Series panel saw is a compact unit that includes standard features plus an accessory package recommended to most woodworkers. Ideal for customers who need to break down 5 foot sheet goods that are less than 1 3/4in. thick with precision cuts. A Makita 5007N circular saw and the best dust collection hook ups possible are provided with this machine. U.S.A.What's Included -
Out of stock
Style (Type) Cabinet Blade Diameter (In.) 10 Arbor Diameter (In.) 5/8 Arbor Speed (RPM) 4300 Maximum Depth of Cut (In.) 3 Maximum Depth of Cut at 45 Degrees (In.) 2-1/8 Maximum Rip Left of Blade (In.) 13 Maximum Rip Right of Blade (In.) 30 Table in Front of Saw Blade at Maximum Depth of Cut (In.) 10 Maximum Diameter of Dado (In.) 8 Maximum Width of Dado (In.) 13/16 Table Type Cast Iron Table Size (L x W) (In.) 29 x 20 -
Out of stock
- Triangular design provides superior column rigidity
- 12-1/4-Inch Resaw capacity for cutting large pieces of wood, slicing veneers and cutting book matched panels
- 21-Inch by 21-Inch precision ground cast iron table for added stability and work support
- 2 Speed poly V-belt drive
- Precision computer balanced wheels eliminate vibration for accurate blade tracking
-
DESCRIPTION
The C4 model packs all of the features of the full-size saws into a portable 5′ frame. This panel saw can travel to work sites and fit into shops with limited floor space. The C4 is ideal for cutting 4’–8′ sheets of material. Standard Equipment- 3 ¼ Hp, 15 amp industrial duty saw motor.
- Zinc plated 1 ¾” steel guide tubes.
- 4 Nylatron roller bearing systems.
- Adjustable vertical and horizontal rulers.
- Quick change from vertical to horizontal cutting.
- Thin material pressure guard.
- Injection-molded plastic material rollers.
- Spring loaded counter balance system.
- Integrated dust collection bonnet.
- Extended warranty.
- TUV certified to UL/CSA standards
- Wall mounted
- QUICK STOP™ Gauge 5 ft./2.44m
- Dust collection kit (vacuum additional)
- Fixed stand/folding stand with C-Series
- Set of wheels
- 860ATB Foam Core Saw Blade
- Folding stand
-
Out of stock
Sign Shops cut a variety of material, not just wood, materials such as aluminum composites, corrugated plastics, foam board, PVC material, wood and much more. For some time, sign shops had to use different machines to cut each material. Thankfully, those days are gone, with the help of our Sign Maker’s Series. C64SM model features a 60" wide frame for size restricted shops and a 64" vertical cut. Also available in Full Size models.- Compact 60" Wide Frame
- Makita 5007F 7.25" saw
- Spinning saw insert plate
- Spring Hold Down
- Pivoting Knife Cutter
- Dust hood, hose, brush
- Folding Stand and Wheels
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
