-
This slider will allow you to crosscut sheets up to 63" x 106-1/4" and rip panels as wide as 33". This 7-1/2 HP workhorse has all of the user-friendly features you'd expect from an industrial-duty sliding table saw, like a scoring blade that eliminates tear-out, a miter fence with adjustable flip-stops, dust ports above and below the blade, riving knife, a standard rip fence, and a clamping hold-down system for the sliding table. For production ripping and crosscutting, every shop needs a sliding table saw, and the G0820 just might be the perfect fit. -
Out of stock
Sign Shops cut a variety of material, not just wood, materials such as aluminum composites, corrugated plastics, foam board, PVC material, wood and much more. For some time, sign shops had to use different machines to cut each material. Thankfully, those days are gone, with the help of our Sign Maker’s Series. FS100SM model features a 120" wide frame and a 100" vertical cut.- Full Size 120" Wide Frame
- Makita 5007F 7.25" saw
- Spinning saw insert plate
- Spring Hold Down
- Pivoting Knife Cutter
- Dust hood, hose, brush
- Folding Stand and Wheels
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
The Saw Trax Full Size 3000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. Features a 74" vertical cut. This series includes an accessory package recommended for customers cutting melamine, custom doors and other material up to 2 1/2 inches thick.- Full Size 120" Wide Frame
- Makita 10" circular saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Steel covered material rollers
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
Out of stock
Style (Type) Cabinet Blade Diameter (In.) 12 Arbor Diameter (In.) 1 Arbor Speed (RPM) 4300 Maximum Depth of Cut (In.) 4 Maximum Depth of Cut at 45 Degrees (In.) 2-7/8 Maximum Rip Left of Blade (In.) 14 Maximum Rip Right of Blade (In.) 50 Maximum Diameter of Dado (In.) 8 Maximum Width of Dado (In.) 13/16 Table Type Cast Iron Table Size (L x W) (In.) 31-1/2 x 24 Table Size with Extension (L x W) (In.) 31-1/2 x 80 Miter Gauge Type T-Slot with Stops Dust Collection Minimum CFM Required (CFM) 350 Dust Port Outside Diameter (In.) 4 Motor Power (HP) 5 Motor Phase (PH) 1 Motor Voltage (V.) 230 Prewired Voltage (V.) 230 -
Out of stock
The Resaw Master is exactly what this bandsaw is really good at. With 18 resaw and 2 blade capacity, you basically have your own lumber mill. This bandsaw comes standard with a 5 HP Leeson motor for resawing large lumber. The standard high/low resaw fence, geared trunions, and EZ tension indicator make operating a breeze. Our award winning Laguna Guide system features thumb screws for quick adjustment and precision control. -
Out of stock
Get ready for something radically different. The UNISAW, has been redesigned from the ground up and loaded with industry firsts. Like a conveniently located push-button arbor lock for quick, easy blade changes. Or a tool-free, split-design guarding system with a true rise and fall riving knife for through and non-through cuts. There's even a BIESEMEYER Fence accurate to 1/64 in.- Single-Cast Trunnion System results in incredible vibration control providing continuous smooth operation and dependable accuracy
- Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
- The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4°
- Tool-Free Split Guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools
- The Cabinet Construction consists of a large cast iron base providing stability and solid footing
- Table Top provides more surface area to stabilize the product and offers outstanding smoothness and superior ease
- The Largest Blade Opening in class makes fine tuning your riving knife and blade changes easier than ever
- The Push Button Arbor Lock makes the blade changing process simple and more natural with the use of only 1 wrench
- Large, Easy to Access ON/OFF switch is multi-directional and can be activated from any angle
- Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge
- provides a sealed interior. This combination results in much higher level of dust collection
- BIESEMEYER® Fence System provides hairline pointer and built-in tape allowing you to make precision set-ups, cut after cut. 9-ply fence faces
- have improved tolerances like no other as well as an improved cam front lock lever for an over lock with a curved edge
- On-Board Miter Gauge Storage is conveniently located on the side of the cabinet and On-Board Wrench and Push Stick Storage is conveniently located beside the switch
-
The Saw Trax Full Size 3000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. Features a 62" vertical cut. This series includes an accessory package recommended for customers cutting melamine, custom doors and other material up to 2 1/2 inches thick.
- Full Size 120" Wide Frame
- Makita 10" circular saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Steel covered material rollers
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
The Saw Trax Full Size 3000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. Features a 50" vertical cut. This series includes an accessory package recommended for customers cutting melamine, custom doors and other material up to 2 1/2 inches thick.
- Full Size 120" Wide Frame
- Makita 10" circular saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Steel covered material rollers
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
The Saw Trax Full Size 1000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 10100 features a 100″ vertical cut. This series includes an accessory package recommended for most general wood workers. This 1000 series are ideal for customers that need a vertical panel saw to perform precision cuts in sheet goods that are less than 1 ¾ inches thick.- Full Size 120" Wide Frame
- Makita 5007F 7.25" saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
The Saw Trax Full Size 2000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 2076 features a 76″ vertical cut.This series includes an accessory package recommended for most production companies. This 2000 series features and is ideal for customers cutting a large volume of sheet goods up to 1 3/4 inches thick.- Full Size 120" Wide Frame
- Makita 7.25" saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Steel covered material rollers
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
Out of stock
-
The Saw Trax Full Size 2000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 2064 features a 64″ vertical cut.This series includes an accessory package recommended for most production companies. This 2000 series features and is ideal for customers cutting a large volume of sheet goods up to 1 3/4 inches thick.
- Full Size 120" Wide Frame
- Makita 7.25" saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Steel covered material rollers
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
