- Powerful 500W motor provides ample power for the most demanding sanding and polishing tasks
- Dual orbit sanding action with free-run mode for fine sanding, and geared fixed orbit mode for fast material removal and buffing
- Vacuum dust extraction port for increased operator safety and clean work areas
- Constant speed under load ensures maximum control at all times
- Variable speed control and backing pad braking system adapt to a variety of materials and prevent workpiece damage
- Rubber over-moulded grip offers increased support, safety & control of the tool
- Adjustable auxiliary handle adapts the tool to the job and matches operator preference
- Soft case, 6 sanding discs with various grit and 2 x spare carbon brushes for convenient storage, different sanding applications and extended service life
-
The Triton TGEOS is a powerful 500W dual-mode sander with a 6'' diameter backing pad. With variable speed and electronic speed maintenance under load, the motor won't bog down under pressure, and you can fine tune the speed to suit the task. Features: -
Heavy Duty Oscillating BENCH Spindle Sander; 1/2 HP, 115V, 29 OPM; Precision Ground Cast Iron Tilting Table; 5 interchangeable threaded spindles, 1/4-Inch, 1/2-Inch, 5/8-Inch, 1 1/2-Inch and 2-Inch; 4 table inserts; Dust Port and onboard storage. Features: --Powerful 1/2 HP, 115V motor with 1,725 RPM spindle speed and 29 oscillations per minute --Fully enclosed, heavy-duty steel frame construction for minimum vibration --14-3/4-in x 14-3/4-in precision ground cast-iron table --15/16-in oscillating action uses more of the sleeve, prolonging the life of the sleeve --Positive stops at 90 degrees and large bevel scale for accuracy and convenience --Heavy-duty, steel table support and bevel system provides increased stability and long-lasting durability --Twin locking handles for stability in bevel position --Smooth precision ball bearings support the main spindle, and heavy-duty worm and gear mechanism drives the oscillations.- Motor: 1/2 HP, 115V, 1 Phase
- Speeds: 1,725 RPM, 29 OPM with 15/16 in. oscillation length
- Table: 14 3/4 in. x 14 3/4 in., tilting, precision ground cast iron
- Table Height: 18 in.
- Opening Diameter for Inserts: 5 1/2 in.
- Spindle Length: 5 1/2 in.
- Dust Port: 2 1/4 in., included adaptor for up to 4 in.
- Base Dimensions: 14 1/2 in. depth x 14 1/2 in. width
-
Out of stock
6-Inch by 89-Inch Oscillating Edge Sander; 1 1/2 Hp, 115/230V (wired 230V) 1 phase motor; Oscillating belt 108 OPM; Belt Speed 3,900 FPM; Cast Iron tilt table; Cast iron Contour Sanding Table; Fence; Dust Hood; Miter Guage; Backstops & Tracking Tool.- Precision ground steel platen with graphite pad eliminates distortion and extends belt life
- Aggressive, powerful sanding system for quick material removal in vertical or horizontal positions and any bevel position in between
- Backed by a 5 year warranty
-
Out of stock
Style (Type) Floor Sanding Belt Size (L x W) (in) 89 x 6 Main Table Size (LxW) (In.) 29-3/4 x 9-7/8 Main Table Tilt (Deg.) 90 Dust Port Outside Diameter (In.) 4 Motor Power (HP) 1-1/2 Motor Phase 1 Motor Voltage (V) 115 Prewired Voltage (V) 115 
5 Year Warranty JET
JET Tools warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools. For the name of an Authorized Service Center in your area call 1-800-274-6848. -
Out of stock
Integrated LED Control Panel shows power, belt speed, and DRO. Equipped with Feed Logic to produce exceptional finish while preventing machine overload. Secondary, absolute depth scale provides an additional height reading. Drum carriage is cast iron to provide greater strength and consistent performance. Steel hood with a 4 dust port provide excellent dust collection. -
Out of stock
Finally, a production class Dual Drum Sander that is loaded with features. This machine features a 5HP motor to power the twin poly V-belts. The dual steel drums have a hard durometer rubber coating to assure a flat, mar free finish. Independently adjustable rear drum makes fine tuning easy. A heavy cast iron table incorporates four solid jackscrews with chain drive timing to keep it level at all times. The heavy-duty poly conveyor belt provides a positive grip on the stock. The 1/4HP feed motor is coupled to a two-speed forward/reverse gearbox that will sand 8 and 12 surface feet per minute. The heavy steel cabinet provides years of vibration free sanding, with plenty of storage space underneath. -
Out of stock
This is a production class Dual Drum Sander that is loaded with features. A 7-1/2 HP motor drives the dual steel drums, which have a hard durometer rubber coating to ensure a flat, mar free finish. Independently adjustable rear drum makes fine tuning easy. A heavy cast iron table incorporates four solid jackscrews with chain drive timing to keep it level at all times. The heavy-duty poly conveyor belt provides a positive grip on the stock. The 1/4 HP feed motor is coupled to a two-speed forward/reverse gearbox that will sand 8 and 12 surface feet per minute. The heavy steel cabinet provides vibration free sanding, with plenty of storage space underneath. -
Out of stock
The production class Powermatic DDS-237 Dual Drum Sander that is loaded with features. A 10HP motor drives the dual steel drums, which have a hard durometer rubber coating to ensure a flat, mar free finish. Independently adjustable rear drum makes fine tuning easy. A heavy cast iron table incorporates four solid jackscrews with chain drive timing to keep it level at all times. The heavy-duty poly conveyor belt provides a positive grip on the stock. The 1/4HP feed motor is coupled to a two-speed forward/reverse gearbox that will sand 8 and 12 surface feet per minute. The heavy steel cabinet provides vibration free sanding, with plenty of storage space underneath.