- The latest and greatest edition of the original dust cyclone!
- Up to 2x the airflow of smaller cyclones and lid-style separators.
- Upgrades any make/model shop vacuum with 2.5" hose fittings.
- Neutral-vane technology improves separation efficiency by 20%.
- Large 10-gallon steel drum contains heavy dust loads.
- Highly portable design with stable caster wheel base.
- 4-1/2 foot crush-resistant hose features 2.5" hose cuffs.
- Anti-static components significantly reduce the likelihood of static shocks.
-
Air Filtration (3)
-
Dust Collectors (7)
-
Vacuums (6)
-
Out of stock
Improved, high airflow, cyclone design stops over 99% of fine dusts and bulk debris from clogging your vacuum's filter - eliminating suction loss while saving you time and money on expensive replacements! 10 Gal. Deluxe kit comes with everything you need for heavy dust loads! -
Improved, high airflow, cyclone design stops over 99% of fine dusts and bulk debris from clogging your vacuum's filter - eliminating suction loss while saving you time and money on expensive replacements! 10 Gal. Deluxe kit comes with everything you need for heavy dust loads!- The latest and greatest edition of the original dust cyclone!
- Up to 2x the airflow of smaller cyclones and lid-style separators.
- Upgrades any make/model shop vacuum with 2.5" hose fittings.
- Neutral-vane technology improves separation efficiency by 20%.
- Large 10-gallon steel drum contains heavy dust loads.
- Highly portable design with stable caster wheel base.
- 4-1/2 foot crush-resistant hose features 2.5" hose cuffs.
- Anti-static components significantly reduce the likelihood of static shocks.
Waste Capacity 10 Gallons Portable Yes Inlet Size Nominal: 2.25" I.D. / 2.5" O.D. Actual: Tapered 2.31" to 2.29" I.D. Outlet Size Nominal: 2.25" I.D. Actual: Tapered 2.31" to 2.29" I.D. Discharge Size 3" I.D. Primary Build Materials Steel, Polypropylene Thickness 22 Gauge (Drum Body) Static Resistance Rating Anti-Static Color Clear Width 19" Height 34-1/4" Height to Center of Inlet 32 -7/16" Product Compatibility Wet/Dry Vacuums with 2.5" hoses and inlets Contents Cyclone Separator, Pre-Cut Drum Lid, Lid Clamp, Drum Dolly, Caster Wheels, Hose, Hardware Manufacturer Oneida Air Systems Country of Manufacture United States Warranty Information 1 Year Limited Warranty Proposition 65 WARNING: This product may expose you to chemicals, including Nickel (metallic), which is known to the State of California to cause cancer or birth defects or reproductive harm. -
Single stage dust collectors lose suction very quickly as the filter becomes clogged with dust. Using a cyclone separator like the Super Dust Deputy XL in conjunction with your collector will separate over 99% of dust from the air stream prior to reaching the filter. This prevents your vacuum's filter from clogging, allowing you to work safer and longer while saving you valuable time and money on replacement filters and bags! This also serves to protect your collector's motor and impeller from debris such as large wood chunks and shop debris (e.g. nuts, bolts, etc.). [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]- Rotationally molded from our high-tech, static conductive resin
- Patented cyclone design removes over 99% of waste material from the air stream
- Compact footprint saves valuable workshop space
- Lightweight design increases mobility
- Includes the Super Dust Deputy® XL cyclone separator, foam gasket, and mounting hardware
- Mount it to one of our Optional Drum Kits or use your own!
-
Fein Turbo 1 vacuum with 5.8 gallon tank which includes an Auto-start wet dry vacuum. Powerful 1100 watt by-pass motor is ideal for the job site or DIY use. An integrated power tool socket with automatic start/stop function ensures that the extractor starts after a power tool has been switched on. 66 DB noise level.- Auto-Start Vacuum for power tools-allows your vacuum to turn on automatically!
- Powerful suction with 98.4" of static water lift
- On board storage for cord and accessories
- Long hose (13') and cord (18') for ease of use
- By-pass cooling for long life of vacuum
-
Out of stock
With the Ultimate Dust Deputy® you can combine Oneida's patented Dust Deputy® cyclone with the quality and performance of a Festool® CT Dust Extraction System to create the ultimate three stage vacuum system! [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]- Industrial static conductive, 9 Gallon (34L) container
- Dust Bagger, plastic bag hold-down system. No messy dumping - allows easy removal of dust in plastic bags.
- Static conductive cyclone separator, hose, and components
- Compatible with any vacuum
- Attaches directly to Festool CT Dust Extractors
- Maintains grounding path for industrial applications using a grounded-inlet vacuum
- Vacuum Not Included
-
Out of stock
This air filtration system is setting new standards in clean air. With the smart technology the laser sensor continually scans the air in the room for dust, dirt, smoke and other particulates. When it senses those particulates it turns on to automatically clean the air. It senses particles as small as 3 Microns. Since it typically hangs above a tool or workbench the 2 LED lights will help light the project below. You can operate it in manual mode and control three speeds... 1189, 756 & 580 CFM. At top speed you can clean the air in a 20' x 20' x 8' shop in just under 3 minutes, or over 21 times an hour. In the manual mode you can also control the times to set it at 1 to 24 hours by the hour with the convenient remote control. -
This air filtration system is setting new standards in clean air. With the smart technology the laser sensor continually scans the air in the room for dust, dirt, smoke and other particulates. When it senses those particulates it turns on to automatically clean the air. It senses particles as small as 3 Microns. Since it typically hangs above a tool or workbench the 2 LED lights will help light the project below. You can operate it in manual mode and control three speeds... 1750, 1300 & 880 CFM. At top speed you can clean the air in a 20' x 20' x 8' shop in just under 2 minutes, or over 32 times an hour. In the manual mode you can also control the times to set it at 1 to 24 hours by the hour with the convenient remote control. -
This floor mounted air filtration system has set a new standard for clean air. With General's smart technology the laser sensor continually scans the air in the room for dust, dirt, smoke and other particulates. When it senses those particulates it turns on to automatically clean the air. It will sense particles as small as 3 Microns. It also operates in manual mode and control three speeds.. 1440, 1150 & 950 CFM. At top speed, the air in a 20' x 20' x 8' shop is exchanged in under 3 minutes, or 27 times an hour. In the manual mode you set the control in hourly increments up to 24 hrs. -
Out of stock
This portable cyclone dust collector was rated "Top Tool" of 2017 by Fine Woodworking thanks to its powerful U.S. fan blower motor, 22 gallon drop-down bin, fill viewer, liner bag holder, and hospital-grade HEPA filter. Its highly mobile and compact footprint makes it ideal for workshops where space is limited. Recommended for tools with 4" to 6" dust collection ports, including lathes, jointers, shapers, planers, table saws, router tables, disc sanders, drum sanders, belt sanders, and more! Browse our selection of dust hoods to maximize your performance with open air tools such as lathes and sanders.Innovative Benefits & Features
- 1.5HP 110V Industrial U.S. Made Fan Blower Motor
- Integrated High-Efficiency Cyclone Separator with 5" Inlet
- 3rd Party Tested HEPA Cartridge Filter with Easy-Clean Port
- Compact, Steel Mobility Stand with Locking, Non-Marking Casters
- 22 Gallon Drop-Down Waste Container with Casters and Viewing Window
- Plastic Liner Bag Gripping System (2 Free Bags Included)
-
Oneida Air Systems' Dust Cobra® is the system of choice for both hobbyist and professional craftsman looking for a powerful, compact, and versatile dust control system. Its patented cyclonic design provides 3x higher airflow performance when compared to traditional vacuums and works to minimize downtime by virtually eliminating filter clogging and suction loss. By combining the best features of a dust collector and a vacuum, the portable Dust Cobra is a hybrid system that can be used in nearly any application for general shop clean-up. Its high pressure intake makes it ideal for dust extraction from tools with dust ports 4" dia. and smaller (where standard dust collectors fall short) including sanders, buffers, edgers, grinders, band saws, scroll saws, chop/miter saws, routers, mini-lathes, and more!Innovative Benefits & Features
- Industrial 120V High Performance Fan Blower Motor
- Streamlined High-Efficiency Cyclone Separator with 2.5" Inlet
- Full-Unit HEPA Certification Meets & Exceeds EPA RRP Guidelines
- Internal Rapid Pulse Filter Cleaner™ System
- Compact Footprint
- Reinforced 17 or 35-Gallon Steel Dust Bin
- Automatic Bag Holder System (5 Free Bags Included)
- Automatic Dust Bin Level Sensor
- Mobility Kit with Large, Non-Marking Casters (2x Locking)
- 25 Foot Vacuum Hose and Hose Accessory Kit
See how Clayscapes, a pottery supply, and pottery school uses the Industrial Dust Cobra for cleanup of toxic materials around the studio. -
Out of stock
-
Oneida Air Systems' Dust Cobra® is the system of choice for both hobbyist and professional craftsman looking for a powerful, compact, and versatile dust control system. Its patented cyclonic design provides 3x higher airflow performance when compared to traditional vacuums and works to minimize downtime by virtually eliminating filter clogging and suction loss. By combining the best features of a dust collector and a vacuum, the portable Dust Cobra is a hybrid system that can be used in nearly any application for general shop clean-up. Its high pressure intake makes it ideal for dust extraction from tools with dust ports 4" dia. and smaller (where standard dust collectors fall short) including sanders, buffers, edgers, grinders, band saws, scroll saws, chop/miter saws, routers, mini-lathes, and more!
Innovative Benefits & Features
- Industrial 120V High Performance Fan Blower Motor
- Streamlined High-Efficiency Cyclone Separator with 2.5" Inlet
- Full-Unit HEPA Certification Meets & Exceeds EPA RRP Guidelines
- Internal Rapid Pulse Filter Cleaner™ System
- Mobile 14-Gallon Drop-Down Dust Bin
- Automatic Bag Holder System (5 Free Bags Included)
- Automatic Dust Bin Level Sensor
- Compact, Steel Wall-Mounting Bracket
- 25 Foot Vacuum Hose and Hose Accessory Kit
New Dust Cobra Product Overview
See how Clayscapes, a pottery supply, and pottery school uses the Industrial Dust Cobra for cleanup of toxic materials around the studio. -
-
Out of stock
The SB1092 2 HP cyclone dust collector is not just top of its class in performance and dependability, it comes packed with features to help you improve workflow and efficiency. The two-stage collector separates the large chips and debris into an easy-to-empty 28-gallon drum, then the fine particles travel through a self-cleaning 1-micron pleated filter and collect into the lower plastic bag. The wireless remote with timer settings for automatic shutoff allows you to control the SB1092 from anywhere in your shop. Connect up to two machines for simultaneous dust collection with the included 8" X 4" two-inlet adapter, or devote to a single machine. FEATURES:- Steel stand with built-in casters
- Clear disposable plastic collection bags
- Automatic filter paddle brush for easy cleaning
- Compact with a low overall height of 64"
- Remote controlled magnetic switch
- Reinforced motor mount
- Timed shutoff settings
- Rolling collection drum with quick-release lift handle
- Vacuum equalizer built into collection drum for use with collection bags
- Built-in sound muffler
- US based customer service and technical support