- One piece 14 gage 2 by 3" rectangular steel guide tube, mounted to on 1/4" section angle iron rail.
- Fence body constructed of 14 gage welded steel.
- Fence securely clamps to both front tube only to insure perfectly parallelism to the blade front to back.
-
The Delta 50 in. T-Square Fence and Rail system fits the Delta Unisaw. It comes with the fence, rails and table legs. It has laminated 9 ply birch plywood sides for durability and non-marring. -
Improved, high airflow, cyclone design stops over 99% of fine dusts and bulk debris from clogging your vacuum's filter - eliminating suction loss while saving you time and money on expensive replacements! 10 Gal. Deluxe kit comes with everything you need for heavy dust loads!- The latest and greatest edition of the original dust cyclone!
- Up to 2x the airflow of smaller cyclones and lid-style separators.
- Upgrades any make/model shop vacuum with 2.5" hose fittings.
- Neutral-vane technology improves separation efficiency by 20%.
- Large 10-gallon steel drum contains heavy dust loads.
- Highly portable design with stable caster wheel base.
- 4-1/2 foot crush-resistant hose features 2.5" hose cuffs.
- Anti-static components significantly reduce the likelihood of static shocks.
Waste Capacity 10 Gallons Portable Yes Inlet Size Nominal: 2.25" I.D. / 2.5" O.D. Actual: Tapered 2.31" to 2.29" I.D. Outlet Size Nominal: 2.25" I.D. Actual: Tapered 2.31" to 2.29" I.D. Discharge Size 3" I.D. Primary Build Materials Steel, Polypropylene Thickness 22 Gauge (Drum Body) Static Resistance Rating Anti-Static Color Clear Width 19" Height 34-1/4" Height to Center of Inlet 32 -7/16" Product Compatibility Wet/Dry Vacuums with 2.5" hoses and inlets Contents Cyclone Separator, Pre-Cut Drum Lid, Lid Clamp, Drum Dolly, Caster Wheels, Hose, Hardware Manufacturer Oneida Air Systems Country of Manufacture United States Warranty Information 1 Year Limited Warranty Proposition 65 WARNING: This product may expose you to chemicals, including Nickel (metallic), which is known to the State of California to cause cancer or birth defects or reproductive harm. -
Delta’s 36-L552 left tilt cabinet saw is ideal for woodworking, cabinet making, and boat building. It features up-front dual-crank controls with locking cams, speedometer style scales and a 52 inch Biesemeyer fence. The 5HP 220V motor cuts hardwoods and engineered products like MDF and melamine. The riving knife enables tool-less adjustment for through- and non-through cuts including grooves for shelves and picture frames as well as dadoes, rabbets, and cheek cuts for furniture. The single-cast trunion provides increased vibration control. Largest throat plate in category eases blade changes. Storage under the table board is convenient and expandable. Bi-level dust extraction improves dust collection. The 36-L500 is one of several pieces that make the 36-L552.- Single-cast trunnion system results in incredible vibration control providing continuous smooth operation and dependable accuracy
- Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
- The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4 degree
- The Cabinet Construction consists of a large cast-iron base providing stability and solid footing; True american marathon motor provides added power and is available in both 3 and 5 hp
-
Out of stock
With the Ultimate Dust Deputy® you can combine Oneida's patented Dust Deputy® cyclone with the quality and performance of a Festool® CT Dust Extraction System to create the ultimate three stage vacuum system!- Industrial static conductive, 9 Gallon (34L) container
- Dust Bagger, plastic bag hold-down system. No messy dumping - allows easy removal of dust in plastic bags.
- Static conductive cyclone separator, hose, and components
- Compatible with any vacuum
- Attaches directly to Festool CT Dust Extractors
- Maintains grounding path for industrial applications using a grounded-inlet vacuum
- Vacuum Not Included
-
Heavy Duty Oscillating BENCH Spindle Sander; 1/2 HP, 115V, 29 OPM; Precision Ground Cast Iron Tilting Table; 5 interchangeable threaded spindles, 1/4-Inch, 1/2-Inch, 5/8-Inch, 1 1/2-Inch and 2-Inch; 4 table inserts; Dust Port and onboard storage. Features: --Powerful 1/2 HP, 115V motor with 1,725 RPM spindle speed and 29 oscillations per minute --Fully enclosed, heavy-duty steel frame construction for minimum vibration --14-3/4-in x 14-3/4-in precision ground cast-iron table --15/16-in oscillating action uses more of the sleeve, prolonging the life of the sleeve --Positive stops at 90 degrees and large bevel scale for accuracy and convenience --Heavy-duty, steel table support and bevel system provides increased stability and long-lasting durability --Twin locking handles for stability in bevel position --Smooth precision ball bearings support the main spindle, and heavy-duty worm and gear mechanism drives the oscillations.- Motor: 1/2 HP, 115V, 1 Phase
- Speeds: 1,725 RPM, 29 OPM with 15/16 in. oscillation length
- Table: 14 3/4 in. x 14 3/4 in., tilting, precision ground cast iron
- Table Height: 18 in.
- Opening Diameter for Inserts: 5 1/2 in.
- Spindle Length: 5 1/2 in.
- Dust Port: 2 1/4 in., included adaptor for up to 4 in.
- Base Dimensions: 14 1/2 in. depth x 14 1/2 in. width
-
Out of stock
- Exclusive Cam Locking System
- Double sealed bearing construction
- Bit Changes above the table for all routers
- Machined from 3/8-Inch solid aluminum and Hard Anodized for durability
- Fits most fixed base routers on the market today
-
Out of stock
Powermatic warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty lasts for the time period specified in the literature included with your product or on the official Powermatic branded website.- Powermatic products carry a limited warranty which varies in duration based upon the product. (See chart below)
- Accessories carry a limited warranty of one year from the date of receipt.
- Consumable items are defined as expendable parts or accessories expected to become inoperable within a reasonable amount of use and are covered by a 90 day limited warranty against manufacturer’s defects.Who is CoveredThis warranty covers only the initial purchaser of the product from the date of delivery.What is CoveredThis warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations or lack of maintenance. Powermatic woodworking machinery is designed to be used with Wood. Use of these machines in the processing of metal, plastics, or other materials outside recommended guidelines may void the warranty. The exceptions are acrylics and other natural items that are made specifically for wood turning.Warranty LimitationsWoodworking products with a Five Year Warranty that are used for commercial or industrial purposes default to a Two Year Warranty. Please contact Technical Service at 1-800-274-6846 for further clarification.
-
Delta Biesemeryer Black Table Saw Fence Body was the Industry's first hairline accurate fence for both left and right hand cuts.- Simple and accurate 3 point locking system rated industry best
- Fits models 36-L352, 36-L552 and 36-L552LVC Type 2 Unisaws
- Entire fence is adjustable for fast accurate cuts time and time again
-
Out of stock
The expandable roller stand is everything you could want in an assistive conveyor for your machines. Need to sand a door on your drum sander? Easy, simply unfold the roller and set the door on it for easy and stable sanding. Use the expandable roller stand with a table saw, bandsaw, drum sander, or really any machine that could use some extra loading room! Adjustable height and length make it ideal for any size workshop Specifications- Maximum load capacity – 200lbs
- Minimum length – 14 3/4″
- Maximum length – 50″
- Adjustable Height – 23″ to 36″
- Number of Rollers – 9 Nickel Plated
- Rollers Dimensions (Dia x W) – 1 1/2″ x 13 3/4″
- Swivel casters – 4 x 3″ w Footbrake
-
Out of stock
Style (Type) Floor Sanding Belt Size (L x W) (in) 89 x 6 Main Table Size (LxW) (In.) 29-3/4 x 9-7/8 Main Table Tilt (Deg.) 90 Dust Port Outside Diameter (In.) 4 Motor Power (HP) 1-1/2 Motor Phase 1 Motor Voltage (V) 115 Prewired Voltage (V) 115 
5 Year Warranty JET
JET Tools warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools. For the name of an Authorized Service Center in your area call 1-800-274-6848. -
- Rear roller adjustment dials ensure rear drum is level
- Heavy duty steel frame design with superior finish for long-lasting durability
- Latching top door provides direct access to dual drums for ease in sanding wrap changes
- Toolless drum wrap tensioning clamps make installation and removal of sanding strips easy, requiring less downtime
- Magnetic on/off main motor switch; removable key switch for variable speed feed belt motor
- Two 4 in. dust ports for efficient dust collection requiring a total of only 600 CFMIncludes (2) 4 in. integral dust ports, feed belt, (2) sanding drums, (1) 80 grit and (1) 120 grit sanding strips
- CSA Listed
-
Out of stock
The patented Delta Cruzer sliding miter saw uses military-grade aluminum frame members with heavy duty bearing for super smooth cutting operation and extremely long life. The space saving design is easy to transport and fits against the wall in a shop. Features- 10 in. blade with versatile flip-down fence design provides best-in-class 16 in. crosscut capacity
- Dual bevel 45° left/45° right with front bevel release and 7 positive bevel stops at the most popular angles and easy to reach lever override to move between stops
- 50° left miter/60° right miter capacity with 10 miter detents and positive stops
- One-hand front miter controls with push button miter detent override and front bevel release for quick movement
- Molded handle and full size trigger is comfortable for right or left handed users
- 15 amp motor for powerful cuts and blade brake for safety
- Clear retractable blade guard for full view of cutting area during alignment and cutting
- 1.5 in. dust port for vacuum connection and excellent dust collection
- 5 year Delta warranty