Shop Fox

Out of stock

Shop Fox W1863 12″x 15″ 3-Hp Spiral Cutterhead Planer

$3,799.99
W1863 Shop Fox 15" Helical Cutterhead Planer

Produce smooth, even surfaces with this feature-rich 15" planer.
Planing creates uniform thickness and flatness in wood pieces, making them easier to work with and enhancing their overall quality. The 15", 4-row helical cutterhead comes complete with 52 indexable carbide inserts that can each be rotated three times to expose new, sharp cutting edges. The inserts sit at a slight angle to the for smooth shearing cuts, minimized tearout, a smoother finish, and operating at lower noise levels. A 230-volt, 3 horsepower motor powers through cuts up to 3/32" deep at full width or 1/8" deep on material up to 6" wide. The 2-speed gearbox allows you to choose between 16 and 28 FPM for a smooth finish or high-production feed rate. Other features include a pedestal-mounted switch, precision-ground cast-iron infeed and outfeed tables, and large board return rollers for efficient production. Like all Shop Fox planers, the W1863 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The W1863 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your sander. The Customer Service and Technical Support Teams are also U.S.-based. Parts for the planer may be available online and shipped from the parts warehouse in Springfield, MO. Made in an ISO 9001 factory CSA certified
SPECIFICATIONS:
- Motor: 3 HP, 230V, single-phase, 12A
- Maximum cutting width: 15"
- Maximum cutting height: 6"
- Minimum stock length: 6"
- Minimum stock thickness: 3/16"
- Maximum stock thickness: 6-1/8"
- Maximum depth of cut full width: 3/32"
- Maximum depth of cut 6" wide board: 1/8"
- Cutterhead type: 4-row helical, 52 inserts
- Cutterhead speed: 5000 RPM
- Feed rate: 16 FPM, 28 FPM
- Table size: 15" W x 48" L
- Overall dimensions: 37" W x 48" D x 44" H
- Approximate shipping weight: 553 lbs.
FEATURES:
- Two-year warranty!!
- Helical cutterhead with indexable carbide inserts
- Extra-large ball-bearing return rollers
- Large side-mounted handwheel
- Cabinet style stand
- Internally mounted 3hp motor
- Triple v-belt drive
- Pedestal-mounted control panel with e-stop
- Anti-kickback fingers
- Oil-bath style gearbox for drive system
- Triple belt drive inside housing
- Heavy-duty cast-iron extension wings
Details
Shop Fox W1812 Planer Moulder with Stand

$2,799.99
The Shop Fox W1812 Planer Moulder features precision ground cast iron wings for greater work support, T-slots for easy guide rail adjustment, pedestal mounted switch, improved chip clearance, one-piece enclosed stand and variable speed control for unsurpassed planing and moulding capability.
- Main motor: 2HP, 220V, single-phase, TEFC, 3450 RPM, Power feed motor: 1/4 HP, 180VDC, 1.5A, Feed speed: 0 - 18 FPM
- Precision-ground cast iron infeed and outfeed extension wings
- Dovetailed way for cutterhead housing with precision gib adjustments
- Variable speed power feed with chain drive power transfer
- Pedestal-mounted control switch with variable speed control
Add to cart Details
Out of stock

Shop Fox W1859 8″ x 76″ Parallelogram Jointer w/ Spiral Cutterhead & Mobile Base

$2,499.99

This 8" Parallelogram Jointers feature extra-long infeed and outfeed tables that can be adjusted transversely and longitudinally to each other for ultra-precision face flattening and edge jointing. Table levers with positive table locks provide quick and precise height adjustments, and the pedestal mounted switch is conveniently located for easy on and easy off. This version features a spiral cutterhead. CSA certified.

Details
LAGUNA 3HP 1PH 220V Fusion F3 Table Saw MTSF3362203-013

$2,599.00
The Fusion F3 table saw is built with no compromises. This heavy-duty cabinet saw features a 3HP/220V motor for all your wood cutting needs.

Permanently lubricated bearings and Acme screws on the inside and a precision-ground cast iron table with cast iron upper and lower trunnions mean this saw is built to last from the inside out. Precision-ground cast iron table wings and 14-gauge steel cabinet complete the package.

Integrated dust collection keeps your work surface clear by utilizing dust collection over and under the blade along with a sealed base.

The digital readout allows for precise blade tilt adjustment and the fence features a Hi/Low window for easy set-up and accurate cuts.

The on-board tool storage system keeps all the accessories including the industrial Fusion fence, European Hi-Lo fence, miter gauge and push stick neatly stowed when not in use. While the built in mobile base allows you to move and store your saw wherever you need it.

Includes Laguna Fusion F3 Table Saw, Outfeed Table Attachment, Right Wing Table, 10” x 60T Saw Blade, European Hi-Lo Fence, Industrial Fusion Fence, Dust Collection Guard, Premium Miter Gauge, Blade Guard, Arbor Wrench, Riving Knife, Push Stick, Blade Changing Tool and Premium Zero Clearance Throat Plate.
Specifications

Motor: 3 HP/220V/TEFC Capacitor Start Induction with Poly-V Belt Drive

Motor Speed: 3450 RPM

Starter Switch: Magnetic

Rip Capacity: 36"

Blade Size: 10"

Vertical Cut Height: 3-1/8”

Cut Height at 45°: 2-1/8"

Blade Tilt: 0-45° Left

Minimum Kerf: 3mm ~1/8" (actual: 0.1875")

Maximum Kerf (Dado Blade): 13/16"

Arbor Speed: 4500 RPM

Arbor Diameter: 5/8"

Miter Slot: 3/4" to 1" T-slot

Throat Plate: Zero Clearance Square Die-Cast, w/adjustment

Fence: Double Rail Cam Action

Base Size: 18-5/8" L x 19-1/4" W

Floor to Table Height: 34-3/4"

Table Size: 27"L x 20" W

Extension Wing: 27"L x 12" W (x2)

Throat Plate Size: 14-5/8" L x 4-1/16" W x 1/2" T

Dust Port Size: 3-7/8" OD

CFM Requirement: 400 CFM

Overall Size: 39-3/4" L x 65-5/8" W x 38" H

Machine Weight: 385 lb.

Shipping Weight: 482 lb.

Shipping Dimensions: 29-3/4" L x 46-5/8" W x 42-5/8" H

Warranty: 2 year

Electrical Specifications

Power Requirements: 220V-1PH-60HZ

Amperage (FLA): 15 AMP (220V)

Plug Included: 6-15

Circuit Breaker Required: 220V - 25 AMP

Receptacle Required: 6-15
Add to cart Details
MTSF236110175-0130 Laguna 1-3/4HP 1PH 110V Fusion F2 Table Saw

$1,799.00
Designed for demanding woodworkers with a sleek look, the Fusion F2 Table Saw is ready to start processing wood in your shop.

Permanently lubricated bearings and Acme screws on the inside and a precision-ground cast iron table with cast aluminum alloy upper and lower trunnions mean this saw is built to last from the inside out. Precision-ground cast iron table wings and pre-formed steel cabinet complete the package.

Integrated dust collection keeps your work surface clear by utilizing dust collection over and under the blade along with a sealed base.

The digital readout allows for precise blade tilt adjustment and the fence features a Hi/Low window for easy set-up and accurate cuts.

The on-board tool storage system keeps your European Hi/Low fence, miter gauge and push stick neatly stowed when not in use. While the built in mobile base allows you to move and store your saw wherever you need it.

Includes Laguna Fusion F2 Table Saw, 10” x 60T Saw Blade, Aluminum Rail-Steel Body Fence, Dust Collection Guard, Miter Gauge, Blade Guard, Arbor Wrench, Riving Knife, Push Stick, Blade Changing Tool and Premium Zero Clearance Throat Plate.

Specifications

Motor: 1.75 HP/110V/TEFC Capacitor Start Induction with Poly-V Belt Drive

Motor Speed: 3450 RPM

Starter Switch: Magnetic

Rip Capacity: 36"

Blade Size: 10"

Vertical Cut Height: 3-1/8”

Cut Height at 45°: 2-1/8"

Blade Tilt: 0-45° Left

Minimum Kerf: 3mm ~1/8" (actual: 0.1875")

Maximum Kerf (Dado Blade): 13/16"

Arbor Speed: 4500 RPM

Arbor Diameter: 5/8"

Miter Slot: 3/4" to 1" T-slot

Throat Plate: Zero Clearance Square Die-Cast, w/adjustment

Fence: Double Rail Cam Action

Base Size: 18-5/8" L x 19-1/4" W

Floor to Table Height: 34-3/4"

Table Size: 27"L x 20" W

Extension Wing: 27"L x 12" W (x2)

Throat Plate Size: 14-5/8" L x 4-1/16" W x 1/2" T

Dust Port Size: 3-7/8" OD

CFM Requirement: 400 CFM

Overall Size: 39-3/4" L x 65-5/8" W x 38" H

Machine Weight: 276 lb.

Shipping Weight: 359 lb.

Shipping Dimensions: 29-3/4" L x 46-5/8" W x 42-5/8" H

Warranty: 2 year

Electrical Specifications

Power Requirements: 110V-1PH-60HZ

Amperage (FLA): 14 AMP

Plug Included: 5-15

Circuit Breaker Required: 110V - 25 AMP

Receptacle Required: 5-15
Add to cart Details
Shop Fox W1868 220 Volt 2 Hp 2-Stage Portable Cyclone Dust Collector

$2,350.00
This Cyclone Dust Collector provides the efficiency of a 2-stage cyclone system with the portability of a single-stage dust collector. Features include high surface area pleated filters with paddles to mechanically knock off dust cake, remotely controlled magnetic switches, easy lid lifting levers for emptying collection drums, and a compact design for moving around the shop. Three models are available to suit most dust collection needs.
Specifications

Motor: 2 HP, 220V, 3450 RPM, 9A

Intake hole size: 7"

Impeller: 13" welded steel

Collection drum size: 20 gallons

Air suction capacity: 1023 CFM

Static pressure: 10.9"

Approx. shipping weight: 397 lbs.
California Proposition 65 Warning
Add to cart Details
Shop Fox W1867—1.52-Stage Portable Cyclone Dust Collector

$1,745.00
Description

This Cyclone Dust Collector provides the efficiency of a 2-stage cyclone system with the portability of a single-stage dust collector. Features include high surface area pleated filters with paddles to mechanically knock off dust cake, remotely controlled magnetic switches, easy lid lifting levers for emptying collection drums, and a compact design for moving around the shop. Three models are available to suit most dust collection needs.

Specifications

Motor: 1-1/2 HP, 110V, 3450 RPM, 15A

Intake hole size: 6"

Impeller: 12-3/4" cast aluminum

Collection drum size: 20 gallons

Air suction capacity: 868 CFM

Static pressure: 9.7"

Approx. shipping weight: 375 lbs.

California Proposition 65 Warning
Add to cart Details
Shop Fox W1869—3 Hp 220V- Portable Cyclone Dust Collector

$2,899.99
Description

This Cyclone Dust Collector provides the efficiency of a 2-stage cyclone system with the portability of a single-stage dust collector. Features include high surface area pleated filters with paddles to mechanically knock off dust cake, remotely controlled magnetic switches, easy lid lifting levers for emptying collection drums, and a compact design for moving around the shop. Three models are available to suit most dust collection needs.

Specifications

Motor: 3 HP, 220V, 3450 RPM, 18A

Intake hole size: 8"

Impeller: 15" welded steel

Collection drum size: 35 gallons

Air suction capacity: 1941 CFM

Static pressure: 11.0"

Approx. shipping weight: 419 lbs.

California Proposition 65 Warning
Add to cart Details
Shop Fox M1113 – 18″ 1-1/2 HP 3-Phase Wood/Metal Bandsaw

$3,499.99
A VFD (Variable Frequency Drive) with digital readout provides infinitely variable blade speeds between 150 and 3000 FPM, making this saw great for cutting wood and metal alike! Just turn the speed control dial to set the perfect cutting speed for each type of material you're cutting. Besides providing the variable-speed control, the VFD also allows this machine to take full advantage of the high-torque/low-speed characteristics of a 3-phase motor?while only requiring a single-phase power supply. The vertical cutting configuration and massive cast-iron table also makes it easy to feed intricate, curved cuts. All in all, the strong versatility of this 18" Vertical Wood/Metal Bandsaw makes it an ideal choice when shop space is limited and the range of profect types is diverse! Specifications
- Motor: 1-1/2 HP, 220V, 3-phase
- Power supply requirement: 220V, single-phase, 15A
- Max. cutting height: 12"
- Throat capacity: 17-1/2"
- Blade length: 133"
- Blade size range: 1/8"?1-1/4"
- Blade speed: variable, 150-3000 FPM
- Table tilt: 45° right, 5°left
- Floor to table height: 37-1/4"
- Table size: 18" x 24"
- Left and right table tilting control
- Upper and lower blade guides
- Precision-ground cast-iron table
- Quick-release blade tension
- Steel guide blocks
- Two dust ports
- Wheel brush on lower wheel
- Frequency drive provides variable speed control
- Fully balanced cast-iron wheels with rubber tires
- Rack-and-pinion adjustment on upper blade guide support
- Blade tension scale with magnified cursor
- Twin drive belts
- Includes rip fence and miter gauge
- Rip fence comes with right and left reading indicators, T-slots for quick change attachments, dead lift quick release, ball bearing slide, solid lever lock
- Overall size: 40"W x 76"H x 31"D
- Approximate shipping weight: 327 lbs.
Add to cart Details
Shop Fox W1737 37-Inch Single Phase Wide-Belt Sander

$12,999.99

Door builders and cabinet shops will love the extra capacity of this 37" wide-belt sander. Available with 15 HP 3-phase sanding motors, these wide-belts are built for daily industrial use with features such as a heavy-duty steel cabinet, pneumatic belt oscillation, and a built-in air filter/regulator. The digital control pad automates table adjustments and is accurate to 0.005". Also, the variable-speed conveyor, adjustable oscillation controls, and adjustable graphite/felt platen easily allow the operator to find the perfect combination of settings to achieve soft, smooth finishes on all types of wood.

Add to cart Details
Shop Fox W1848—13-1/4″ Oscillating Floor Drill Press

$795.95
Specifications
- Motor: 3/4 HP, 110V
- Swing: 13-1/4"
- Drill chuck: 1–16mm
- Arbor: JT-33
- Spindle travel: 3-1/8"
- Number of speeds: 12
- Range of speeds: 250-3050 RPM
- Table size: 12-3/8" dia.
- Oscillating spindle: 3/4"
- Table dust port: 2"
- Overall height: 63"
- Includes sanding drums
- Approx. shipping weight: 180 lbs.
Add to cart Details
Shop Fox M1011 24-Inch Box and Pan Brake

$595.00

This pan and box brake is an indispensable tool if you need to increase the strength of sheet metal plates with bends, or you intend on fabricating more complicated brackets, gussets, boxes, or fixtures. The Model M1011 bends mild steels up to 20 gauge thick, 24-inches wide, and ranging in angle from 0 to 135-degrees. The removable and adjustable fingers can be installed in a variety of positions to accommodate varying widths of metal.
Quick indexing of one or many fingers makes this the perfect machine for multiple applications. Achieve extremely sharp bends and easily adjust the fingers closer or farther from the point of bend.

Heavy Duty Hold Down Clamp Lever

Bending sheet metal is a breeze with the M1011. The heavy duty hold down clamp lever allows for clamping and unclamping the sheet metal through the cam mechanism. This machine is built to take on any serious bending work.

Add to cart Details