-
Out of stock
This 8" Parallelogram Jointers feature extra-long infeed and outfeed tables that can be adjusted transversely and longitudinally to each other for ultra-precision face flattening and edge jointing. Table levers with positive table locks provide quick and precise height adjustments, and the pedestal mounted switch is conveniently located for easy on and easy off. This version features a spiral cutterhead. CSA certified. -
The Shop Fox W1812 Planer Moulder features precision ground cast iron wings for greater work support, T-slots for easy guide rail adjustment, pedestal mounted switch, improved chip clearance, one-piece enclosed stand and variable speed control for unsurpassed planing and moulding capability.- Main motor: 2HP, 220V, single-phase, TEFC, 3450 RPM, Power feed motor: 1/4 HP, 180VDC, 1.5A, Feed speed: 0 - 18 FPM
- Precision-ground cast iron infeed and outfeed extension wings
- Dovetailed way for cutterhead housing with precision gib adjustments
- Variable speed power feed with chain drive power transfer
- Pedestal-mounted control switch with variable speed control
-
Out of stock
W1863 Shop Fox 15" Helical Cutterhead Planer
Produce smooth, even surfaces with this feature-rich 15" planer.
Planing creates uniform thickness and flatness in wood pieces, making them easier to work with and enhancing their overall quality. The 15", 4-row helical cutterhead comes complete with 52 indexable carbide inserts that can each be rotated three times to expose new, sharp cutting edges. The inserts sit at a slight angle to the for smooth shearing cuts, minimized tearout, a smoother finish, and operating at lower noise levels. A 230-volt, 3 horsepower motor powers through cuts up to 3/32" deep at full width or 1/8" deep on material up to 6" wide. The 2-speed gearbox allows you to choose between 16 and 28 FPM for a smooth finish or high-production feed rate. Other features include a pedestal-mounted switch, precision-ground cast-iron infeed and outfeed tables, and large board return rollers for efficient production. Like all Shop Fox planers, the W1863 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The W1863 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your sander. The Customer Service and Technical Support Teams are also U.S.-based. Parts for the planer may be available online and shipped from the parts warehouse in Springfield, MO. Made in an ISO 9001 factory CSA certifiedSPECIFICATIONS:
- Motor: 3 HP, 230V, single-phase, 12A
- Maximum cutting width: 15"
- Maximum cutting height: 6"
- Minimum stock length: 6"
- Minimum stock thickness: 3/16"
- Maximum stock thickness: 6-1/8"
- Maximum depth of cut full width: 3/32"
- Maximum depth of cut 6" wide board: 1/8"
- Cutterhead type: 4-row helical, 52 inserts
- Cutterhead speed: 5000 RPM
- Feed rate: 16 FPM, 28 FPM
- Table size: 15" W x 48" L
- Overall dimensions: 37" W x 48" D x 44" H
- Approximate shipping weight: 553 lbs.
FEATURES:
- Two-year warranty!!
- Helical cutterhead with indexable carbide inserts
- Extra-large ball-bearing return rollers
- Large side-mounted handwheel
- Cabinet style stand
- Internally mounted 3hp motor
- Triple v-belt drive
- Pedestal-mounted control panel with e-stop
- Anti-kickback fingers
- Oil-bath style gearbox for drive system
- Triple belt drive inside housing
- Heavy-duty cast-iron extension wings
-
Shop Fox W1878 9" Benchtop Bandsaw
A small footprint and top handle make moving around your workspace easier.
The Shop Fox W1878 9" Benchtop Bandsaw has a combination of features including an efficient 1/3 HP motor, LED work light, deluxe extruded aluminum fence, and a rack-and-pinion table tilt system. The blade guard is also rack-and-pinion making adjustment an easy one-handed operation. The quality design and construction of this bandsaw assures easy, accurate cuts including fine detailed cuts without the vibration found in other benchtop models. Accepting 62-inch blades 1/8" to 3/8" wide, this benchtop bandsaw can cut pieces up to 3-5/8" thick. The blade guides are dual ball bearing and the wheels are adjustable for quick alignment and coplanarity. And, with this saw weighing less than 50 pounds, you can also effortlessly move it between your home, shop or job site. Like all Shop Fox bandsaws, the W1878 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. The W1878 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your saw. The Woodstock Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the bandsaw may be available online and shipped from the Woodstock parts warehouse in Springfield, MO. Made in an ISO 9001 factorySPECIFICATIONS:
- Motor: 1/3 HP, 120V, single-phase, 2.8A
- Max. cutting width left of blade: 8-7/8"
- Max. cutting height (resaw capacity): 3-5/8"
- Blade guides: Ball-bearing upper and lower
- Table size: 12" x 12"
- Table tilt: 0–45°
- Blade size: 61-13/16"–62-3/16" (1/8"–3/8" wide)
- Blade speed: 2460 FPM
- Dust port: 2"
- Footprint: 8-1/2" x 15-1/2"
- Overall dimensions: 21" W x 17" D x 29-1/2" H
- Approximate shipping weight: 49 lbs.
FEATURES:
- Two-year warranty!!
- Adjustable wheels for alignment/coplanarity
- Rack-and-pinion table tilt
- Ball-bearing blade guides
- Extruded aluminum rip fence with camlock handle
- 2" Dust port
- Lower wheel brush to prevent build-up of dust/pitch on wheel
- LED work light
- Carrying handle for easy portability
-
Out of stock
-
W1830 Shop Fox Hanging Air Filter
This little unit provides big results with helping to remove airborne wood dust in your shop. Turn this filter on while you're working and set the timer to run after you leave the shop, and it will continue to clean the air of the fine particles that might otherwise find a home where you don’t want them. ETL certified meeting CSA C22.2 #113-12 and UL 507-9th standards! FEATURES:- Two-year warranty!!
- Infrared remote control system adjusts speeds, timer, and ON/OFF
- Easy to replace filters, no tools required
- Inner filter can be washed or blown out with compressed air
- Includes eye hooks and chains for hanging from the ceiling, or it can be set on a workbench
- ETL listed
- Approximate shipping weight: 34 lbs.
- Motor: 1/8 HP, 120V, 1A
- Air flow: 260, 362, 409 CFM
- Timer settings: 1, 2, & 4 hours
- Outer filter: 5 micron
- Inner filter: 1 micron
-
-
Outer Filter for W1830 Shop Fox Hanging Air Filter. -
Shop Fox M1013 Metal Cutting Bandsaw
5 inch x 6 inch
A bandsaw is a must for any metal shop, and with three speeds, an automatic shut off, and ball bearing blade guides, the Shop Fox M1013 comes equipped with many important performance features. One of these features providing great versatility is the swiveling headstock so there is no fussing with establishing the cut angle at the vise. Just set the workpiece length, and swivel the headstock to an angle between -45 to +60-degrees and make the cut.
- Overall height: horizontal 42-1/2 inches; vertical 54-3/4 inches
- Footprint: 26-1/2 by 20-1/2 inches
- Blade size: 64-1/2 by 1/2 inch
- Blade speeds: 80, 120, 200 FPM
-
W1877 13" Portable Planer With Spiral-Style Cutterhead
Fixed-base planer finish quality in a portable, benchtop planer platform.
The W1877 Shop Fox 13" Portable Planer features a unique repeat cut selector. This allows you to quickly set the cutterhead to 6 pre-set heights from 1/8" to 1-3/4". A convenient thickness scale located on the top of the machine helps you keep your eye on your planing progress. The extension tables fold up for quick transporting and storage. The cutterhead height lock allows for consistent production work. Like all of the Shop Fox planers, the W1877 comes with a 2-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.) The W1877 manual was written by our U.S. based Documentation Department is packed with useful information. The Woodstock Technical Support team is U.S. based. Parts and accessories for the planer are available online and shipped from the Woodstock parts warehouse in Springfield, MO. -
This veneer Press Clamp is used to make custom veneering frames and other clamping fixtures by simply drilling a hole in the frame material to accept the threaded bushing. Double handle design produces greater torque and heavy-duty Acme threads ensure smooth operation. Removable swivel makes installation quick and easy. Overall length is 11-1/2". Veneering frame not included. -
-
-
Description
This Elliptical Jig enables the Mini Planer/Moulder to make high-quality arched casings and mouldings with the same profile normally produced when cutting straight runs of moulding. Ideal for round-top windows and arched doorways that are characteristic of fine custom woodwork. This jig requires a shop-made 3/4" thick template of the same arc or radius as the workpiece. Maximum width capacity is 51/2".Specifications
- 5-1/2" Maximum Width Capacity
- Ball Bearing Guides
- Dovetailed Bearing Block and Base
- Hardware and Instructions Included
- Designed for use with: W1812, W1739 and W1693
