-
Shaper (3)
-
Accessories (9)
-
Rip Saws (2)
-
Bandsaws (10)
-
Drill Presses (1)
-
Dust Collectors (12)
-
Jointers (12)
-
Lathes (7)
-
Panel Saws (2)
-
Planers (9)
-
Table Saws (32)
-
Out of stock
The Powermatic 20" Clear Plastic Collection Bags for Powermatic Dust Collectors in Powermatic WW, Dust Collector Accessories -
Out of stock
We are an authorized Jet/Powermatic dealer. Original Powermatic 6290694 TABLE INSERT 64A Not an aftermarket part or a replica. For use with Powermatic 64A Contractor Saws 1791227K, 1791228K, 1791270K & Powermatic 1791271K Dimensions: 12-1/2" length; 3-1/4" width 1/2" thick -
Out of stock
OEM RF Transmitter Assembly Compatiable with: PM 1200 Air Filtration system -
Out of stock
-
Out of stock
-
Out of stock
-
- Rugged 500-lb capacity so your heavy machines are now mobile
- Expands from 12 x 12 inches to 36 x 36, and can go up to 20 x 52 - all in one-inch increments
- Easy-to-use foot levers lock and unlock wheels for rock-solid stability
- 3-inch heavy-duty rubber wheels
- Low profile increases machine height by less than 1 inch so it won’t interfere with tool operation
- Maximum square size: 34 x 34 inches
-
Out of stock
With the HTC3000 adjustable mobile base, it's never been easier to move equipment around a crowded shop. This fully adjustable mobile base features side rails and corner pieces with holes spaced every inch to insure the perfect fit for your machine. Move bandsaws, table saws, sanders, drill presses, jointers, planers, and much more. You'll be able to open up space for more effective productivity, better organization and safety, and added convenience during cleanup. The base is sturdy and easy to assemble, plus it adjusts to fit virtually any large woodworking machine, forming squares from 14 by 14 inches to 36 by 36 inches and rectangles as big as 22 by 54 inches. Holes at 1-inch increments let you choose any shape in between, and 3-inch diameter wheels at all four corners make it easy to maneuver. Roll one tool in; roll another tool out. The large, industrial-grade foot-operated levers lock machines to the floor, and their increased lever length makes moving heavier machines a breeze. The base also features a durable powder-coated finish. The HTC-3000 has a maximum weight capacity of 700 pounds. All parts are included, and it's backed by a limited lifetime warranty -
Out of stock
-
Out of stock
Spring-pin snap adjustment requires no tools for easy assemblyAdjustable width and length let you configure the base to the tool for total support and portabilityTwo fixed and two swivel casters provide easy maneuverabilityStrong, yet lightweight base can hold tools up to 600 lbs.Expands from 18" x 18" to 28" x 28" -
-
Out of stock
The Mobile Base adds a new dimension of flexibility to your Powermatic machines. Equipment previously considered immovable can easily be moved by only 1-person rearrange your shop for special projects in just minutes. Made of heavy-duty all welded steel tubular frame and independently locking, non-marking wheels.- Heavy-duty frame is welded tubular steel for strong support
- Steel wheels provide easy mobility, independently lock for stability
- Length: 24 in.
- Width: 13.75 in.
-
Out of stock
Heavy-duty frame is welded tubular steel for strong supportSteel wheels provide easy mobility, independently lock for stabilityCompatible with the PWBS-14 bandsaw.Allows your shop to be versatile and organized while saving space.2042377Model PWBS-14CS Band Saw17-1/2”---15-1/2”5-1/2”2”3/4” -
Description
This Elliptical Jig enables the Mini Planer/Moulder to make high-quality arched casings and mouldings with the same profile normally produced when cutting straight runs of moulding. Ideal for round-top windows and arched doorways that are characteristic of fine custom woodwork. This jig requires a shop-made 3/4" thick template of the same arc or radius as the workpiece. Maximum width capacity is 51/2".Specifications
- 5-1/2" Maximum Width Capacity
- Ball Bearing Guides
- Dovetailed Bearing Block and Base
- Hardware and Instructions Included
- Designed for use with: W1812, W1739 and W1693
-
Sale!
Introducing New Auto Dust Sensing Technology- The AFS1000C, when in auto mode, adjusts fan speed based on air quality
- Auto-cleaning technology enables AFS unit to run only when dust is detected
- Molded footing allows air flow under unit for when on a work bench.
- Fan speed can be set in auto mode, or adjusted, from the control panel or the RF remote
- Six speeds allow for precise adjustment
-
IN STOCK. AVAILABLE FOR IMMEDIATE SHIPMENT Powermatic Motor Stock Number: 6284878 TEFC, 3HP,1Ph, 230V, 60Hz,15A Part Number: 6284878 This replacement motor is compatible with the 15HH Planer and the 15S Planer. This OEM motor is compatible with the 15HH Planer and the 15S Planer. Stock No. 1791213 15HH, 15-Inch Planer, Helical Cutterhead, 3HP, 1Ph 230V Stock No. 1791210 15S, 15-inch Planer, 3 Knife Cutterhead, 3HP, 1Ph 230V -
Overview
The 1-1/2 HP Dust Collector is designed to eliminate cleanup after using your wood sanding machine. It has a TEFC induction motor for long-lasting, smooth performance along with a reversible motor assembly to complement the machine you are working with. The unit includes a 1-1/2 HP, 15 amp, 3400 RPM service for up to 1200 CFM.SuperMax Tools Dust Collector vs. Other Brands
Our 1 micron bag can collect up to 99% of particles as small as 5 microns and 90% of particles as small as 1 micron in size. In other words, you’ll have a clean shop. -
Out of stock
Your shop may look clean, but how clean is the air? The PM1200 Air Filtration System traps up to 99% of all 5-micron particles and 85% of all 1-micron particles for a healthier work environment. Three blower speeds modify air flow. The unit can be operated either at the cabinet or with the remote transmitter which uses radio-frequency, eliminating the need for line-of-sight operation. The timer has nine settings, allowing continuous operation for up to 9 hours while you’re away, and will shut off at the end of that period. The filter guards can be removed and installed without tools, for instant filter access. -
Out of stock
-
Out of stock
Replacement motor MOTOR 5HP 3PH 230/460V New P/N PM2000-248B -
Out of stock Replacement motor MOTOR 3HP 1PH 230/460V
-
G0940 13" 2 HP Benchtop Helical Planer with Granite Table
An amazing planer with unique granite table.
Benchtop planers are straightforward to use to surface rough lumber, create uniform thickness in boards, and make precise cuts. This top-of-the-line 13" 2 HP Benchtop Planer with Helical Cutterhead comes with features you would expect from only the best. The G0940 takes those features one step further with a super flat granite main table. The granite table provides exceptional stability, never rusts, and stays smooth and even for the life of the planer compared to steel bases that may deflect or sag in the planing process. The G0940 helical cutterhead has 30 inserts arranged in two rows for smooth shearing cuts, minimized tearout, a smoother finish, and operating at lower noise levels. Featuring a fixed-height table design, the cutterhead raises and lowers for thickness adjustments, as opposed to the table. This allows for permanent infeed and outfeed table setups. A depth-of-cut indicator that reads up to 1/8" helps you track planing depth. An adjustable cutterhead depth stop allows for repeatable planing operations to speed up production, reduce downtime, and improve efficiency. The easy carry handles make this planer great for the job site and can be easily stowed-away after use in any home shop.You just can’t beat the value and performance of one of the best benchtop planers.
Like all Grizzly benchtop thickness planers, the G0940 comes with a one-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0940 manual was written by our U.S.-based Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your planer. The Grizzly Technical Support team is U.S.-based. Parts for the planer may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factorySPECIFICATIONS:
- Motor: 2 HP, 120V, single-phase, 15A
- Max. cut width: 13"
- Min. stock length: 6"
- Min. stock thickness: 1/8"
- Max. stock thickness: 6"
- Max. cut depth full width: 1/32"
- Max. cut depth 6" wide: 3/32"
- Cutterhead type: 2" helical with 2-row spirals, 30 inserts
- Insert size, type: 15mm x 15mm x 2.5mm, indexable carbide inserts
- Cutterhead speed: 8500 RPM
- Feed rate: 25 FPM
- Table size with extensions: 13" x 28"
- Dust port size: 2" with 4" adaptor
- Overall dimensions: 25-1/2" W x 28" D x 19" H
- Approximate shipping weight: 82 lbs.
FEATURES:
- Helical cutterhead
- 1" thick granite table bed
- 13" wide planing capacity
- Dual return rollers
- Convenient grab handles for mobility
- Adjustable depth stop
- 4" dust port adapter
-
Out of stock
OEM eplacement motor for Powermatic 511 panel saw. -
Out of stock
Panel Pro Vertical Panel Saw
Have a two man job and only one man on deck? The Panel Pro PRO2k is your answer. Developed to give professional woodworkers, amateurs and home-hobbyists a tool that will let one person cut big sheets safely, accurately and in a small space. This vertical panel saw is the ideal tool for cutting large panels to size. It can cut straight and square up to 1/32-inch accuracy with a 4-foot vertical cross cut capacity and an 8-foot horizontal crosscut capacity. There's also a quick-change rotating saw head, a factory-aligned guide system and a dust-free nylon-graphite roller bearings. The saw comes standard with a specially adapted 15 amp saw motor, 14-gauge galvanized steel frame, welded guide tube assembly and a folding tubular steel stand. Comes complete with motor, wheels, vertical ruler and two horizontal rulers. Add the optional lower and upper frame extensions for additional support for full sized sheet processing. An optional dust kit is also available allowing easy hook up of a vacuum or dust system. For easy adjustable repetitive cutting, add the optional quick stop angles.
Features:
- Upgraded motor designed specifically for the Panel Pro
- Ergonomically positioned operators handle
- Emergency stop switch
- Low voltage regulatory switch
- Dust port allowing for easy connection to a dust collector
- Lower and upper frame extensions adding additional support for full sized sheet processing (optional)
- Dust kit which includes a hose, rollers, dust tube and steel elbow (optional)
- Quick stop angle that promotes easily adjustable repeat cutting (optional) Benefits:
- One person sawing that is easy and accurate
- Cuts both vertically and horizontally
- Vertical design takes up less space in your shop
- Lightweight for portability to the job site
- Saw blade is completely enclosed and behind the panel when cutting
- Ready to assemble in under 30 minutes
- Folding stand allows for easy storage taking up minimal space
-
Out of stock
The Powermatic’s PM1300TX-CK dust collector has a 1.75-horsepower motor, a collection capacity of 10 cubic feet, and a sound rating of 75 to 90 decibels--and its exclusive TurboCone technology improves chip separation to prevent clogging of the filter and increases packing efficiency of the collector bag. The PM1300TX-CK provides a combination of power and simplicity that makes it both productive and easy to use.- Turbo Cone improves chip separation and collector bag packing efficiency
- The cone eliminates premature filter clogging for sustained performance
- Remote-controlled digital timer can be programmed for up to 99 minutes
- Canister filter offers over six times filtering surface area of standard bags
- All-metal duct construction for rigidity and improved air flow
-
Out of stock
Replacement motor MOTOR 5HP 1PH 230/460V -
Out of stock
- Baldor replacement motor
- Fits table saws models 66, 72A, and 74
- Features 230-volt, 1-phase, 3600 RPM
-
Out of stock
These rugged, heavy-duty Stock Feeders feature continuous-duty motors that transfer power from the gear box to the feed roller through the roller chain and sprockets, providing superior positive feeding for all types of materials. The fully adjustable support columns feature moveable universal joints and heavy locking mechanisms that lock the feeder in horizontal, vertical, or angle feed positions. Solid cast iron construction of bodies, bases and universal joints provide stability with vibration-free feeding. -
Out of stock
Air Flow @ 4" (CFM) 234 Air Flow @ 6" (CFM) 860 Air Flow @ 8" (CFM) 1,754 Number of Air Inlets 1(8") or 3(4") Efficiency (Micron) 30 Static Pressure (WC) 11.31 Sound Rating (DB) 86 - 92 Bag Diameter (In.) 20 Collection Bag Capacity (Cu. Ft.) 10 Collection Bag Length (In.) 30 Filter Bag/Canister Length (In.) 48 Impeller Diameter (In.) 14 Impeller Fins 7 Impeller Material Steel 1-Hose Connection Diameter (In.) 8 3-Hoses Connection Diameter (In.) 4 Motor Power (HP) 3 Motor Phase 1 Motor Voltage (V.) 230 only Motor Current (Amps) 15 Recommended Circuit Size (Amps.) 30 -
Out of stock
This edge sander is perfect for schools and small shops. It’s light enough to move, but solidly built with a cast iron table, something you won’t find on most sanders in this price range.- 99” x 6” belt turns 3,773 feet per minute.
- Runs on 220-volt single-phase power, so you can use it just about anywhere.
- 33” x 12” all cast iron table will stay true and level over many years of use.
- Belt head can tilt, allowing you to sand at 45°, 90°, and 180°.
- Built-in table rise system with a spring assist lets you lift and lower the table without straining. Just turn the handwheel.
- Oscillating belt moves up and down to give you a smoother finished product and longer belt life.
- Storage cabinet in the base allows you to keep extra abrasive belts and tools nearby.
- Rigid steel stand stabilizes the sander for accuracy.
- 4” dust port helps you trap dust and maintain safe, clean air quality in your shop.
- Covered by a 1-year parts warranty.
- We keep replacement parts in stock at our Wisconsin wearhouse, so we can ship them to you without delay.
- You can count on lifetime technical support by phone from our team of customer service reps with hands-on woodworking experience.
SPECIFICATIONS
Item Number ES-6100 Shipping Weight 480lbs Table Size (Length) 33" Table Size (Width) 11.8" RPM 1150 Belt/Blade Size 99" x 6" Fence Size 27.5" x 2.3" Table Tilt (degrees) 0-90 Vertical Stroke (Table) 3.1" Spring Assist Power 220V Single Phase Length 50" Width 29" Height 36" Horse Power 2 Weight (lbs) 480 Oscillation 3/8" End Radius 2" Shipping Dimensions (Inches) 60x44x49 -
Out of stock
Helical Cutterhead ** (serial no. 170615HH7145 and higher). -
Designed for demanding woodworkers with a sleek look, the Fusion F2 Table Saw is ready to start processing wood in your shop.Permanently lubricated bearings and Acme screws on the inside and a precision-ground cast iron table with cast aluminum alloy upper and lower trunnions mean this saw is built to last from the inside out. Precision-ground cast iron table wings and pre-formed steel cabinet complete the package.Integrated dust collection keeps your work surface clear by utilizing dust collection over and under the blade along with a sealed base.The digital readout allows for precise blade tilt adjustment and the fence features a Hi/Low window for easy set-up and accurate cuts.The on-board tool storage system keeps your European Hi/Low fence, miter gauge and push stick neatly stowed when not in use. While the built in mobile base allows you to move and store your saw wherever you need it.Includes Laguna Fusion F2 Table Saw, 10” x 60T Saw Blade, Aluminum Rail-Steel Body Fence, Dust Collection Guard, Miter Gauge, Blade Guard, Arbor Wrench, Riving Knife, Push Stick, Blade Changing Tool and Premium Zero Clearance Throat Plate.Specifications
- Motor: 1.75 HP/110V/TEFC Capacitor Start Induction with Poly-V Belt Drive
- Motor Speed: 3450 RPM
- Starter Switch: Magnetic
- Rip Capacity: 36"
- Blade Size: 10"
- Vertical Cut Height: 3-1/8”
- Cut Height at 45°: 2-1/8"
- Blade Tilt: 0-45° Left
- Minimum Kerf: 3mm ~1/8" (actual: 0.1875")
- Maximum Kerf (Dado Blade): 13/16"
- Arbor Speed: 4500 RPM
- Arbor Diameter: 5/8"
- Miter Slot: 3/4" to 1" T-slot
- Throat Plate: Zero Clearance Square Die-Cast, w/adjustment
- Fence: Double Rail Cam Action
- Base Size: 18-5/8" L x 19-1/4" W
- Floor to Table Height: 34-3/4"
- Table Size: 27"L x 20" W
- Extension Wing: 27"L x 12" W (x2)
- Throat Plate Size: 14-5/8" L x 4-1/16" W x 1/2" T
- Dust Port Size: 3-7/8" OD
- CFM Requirement: 400 CFM
- Overall Size: 39-3/4" L x 65-5/8" W x 38" H
- Machine Weight: 276 lb.
- Shipping Weight: 359 lb.
- Shipping Dimensions: 29-3/4" L x 46-5/8" W x 42-5/8" H
- Warranty: 2 year
- Power Requirements: 110V-1PH-60HZ
- Amperage (FLA): 14 AMP
- Plug Included: 5-15
- Circuit Breaker Required: 110V - 25 AMP
- Receptacle Required: 5-15
-
Out of stock
The PM1900 model PM1900TX-CK3 Dust Collector is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines. The exclusive TurboCone™ improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bags. The canister filter offers superior filtering surface area over standard bags, and captures 98% of 2-micron particles. The all-metal duct improves rigidity and air flow. The clear collector bags are large capacity, which means less down-time changing them. Four swivel casters and conveniently located handles allow for easy mobility. -
Out of stock
Number of Knives 3 Standard Knife Size (L x W x T) (In.) 6-1/6 x 3/4 x 5/64 Cuts Per Minute 18,000 Cutterhead Speed (RPM) 6,000 Cutting Capacity (W x D) (In.) 6 x 1/2 Table Size (L x W) (In.) 66 x 7-1/4 Table Height from Floor (In.) 31-1/2 Infeed Table Length (In.) 32-1/2 Outfeed Table Length (In.) 32-1/2 Rabbeting Capacity (In.) 1/2 Rabbeting Ledge (In.) 9 x 2-1/2 Fence Size (L x H) (In.) 38 x 4 Fence Tilt (Deg.) 45 Forward, 45 Backward Fence Positive Stops (Deg.) 45, 90, -45 Dust Collection Minimum CFM Required (CFM) 600 Dust Port Outside Diameter (In.) 4 Motor Power (HP) 1 Motor Phase 1 Motor Voltage (V.) 115/230 Prewired Voltage (V.) 115 Motor Current (Amps) 13/6.5 Recommended Circuit Size (Amps.) 20/10 -
Out of stock
Air Flow @ 4" (CFM) 236 Air Flow @ 6" (CFM) 860 Air Flow @ 8" (CFM) 1,782 Number of Air Inlets 1(8") or 3(4") Efficiency (Micron) 2 Static Pressure (WC) 11.31 Sound Rating (DB) 86 - 92 Bag Diameter (In.) 20 Collection Bag Capacity (Cu. Ft.) 10 Collection Bag Length (In.) 30 Filter Bag/Canister Length (In.) 26 Impeller Diameter (In.) 14 Impeller Fins 7 Impeller Material Steel 1-Hose Connection Diameter (In.) 8 3-Hoses Connection Diameter (In.) 4 Motor Power (HP) 3 Motor Phase 1 Motor Voltage (V.) 230 only Motor Current (Amps) 15 Recommended Circuit Size (Amps.) 30 -
Out of stock
Rikon Cyclone Dust Collector 1.75 HP 900 CFM
The 1.75 horsepower cyclone dust collector has a newly designed impeller that reduces the stress on the motor while meeting or exceeding air flow compared to other cyclones in their class. This reduced stress allows the motor to operate cooler, more efficient and has up to 33% less cost to operate. This improves the longevity of the motor. Equipped with remote control start functions that operate on bluetooth RF band technology which increases range and ability to operate the unit from a different room. This unit has 900 CFM. Two four inch dust ports. Built in casters for mobility. Large plastic bag liners are used for the dust containment barrel.
FEATURES
1.75 HP - 900 CFM2 - 4 In. dust portsIncludes casters for easy mobility around the shopMore efficient motor save up to 33% cost to operateQuick release for easy cleaningSingle Phase60 Hz., 3450 RPM, TEFC MotorSPECIFICATIONS
Rikon stock number:60-1750Air Volume (CFM)900Assembled Depth (in)40Assembled Weight (lbs)220Assembled Width (in)30Assembly RequiredPartialAutomatic Shut-OffNoBrand / Model CompatibilityRikonCountry of OriginChinaCSA CertifiedNoDecibel Rating (dB)81.6ETL ListedYesglobalTradeItemNumber (GTIN)00814463015200Height (in)60Horsepower (hp)1.75MaterialMetalPackage ContentsDust Containment SystemPackage Depth40Package Height60Package Weight220Recommended Safety EquipmentSafety GlassesStand IncludedYesUL ListedNoUPC814463015200Vacuum AttachableNoVoltage115
Jet 708677PK
Jet 708678PK
Jet 708679PK
Jet 708712PK
Jet 708663RXK
Jet 708674PK
Jet 708675PK
Jet 708676PK
Jet 708536PK
Jet 708662K
Jet 708662RXK
Jet 708663PK