Features & Benefits
- Bonds virtually everything
- 30 second set time
- 30 minute cure time
- Dries clear
- No drip
- Fine tip applicator
- Interior/exterior use
- You are purchasing six .85 oz bottles
-
DAP® RapidFuse® Super Glue is a fast-setting formula that sets in only 30 seconds and cures in just four hours. RapidFuse® Super Glue hybrid adhesive technology provides a durable weatherproof bond that stores well and lasts long. Get a clear bond with no dripping glue and no mess. Appropriate for indoor or outdoor use, RapidFuse® is a water-resistant super glue that bonds virtually everything. -
All Cyclone models.1 caster. -
5 Pack of plastic bags 152 gal. -
Why trust the operation of your Incra Miter Gauge or Miter Slider in just any miter track. The Miter Channel was designed with the same Incra quality and precision to act as the perfect guide for all of your miter needs. Each channel is constructed of hard anodized aluminum for durability with Incra's trademark gold finish. Mounting is easy with pre-drilled holes and included fasteners; simply cut a 1-1/8” wide, 1/2” deep groove in your table. Create a laminated fixture using 1/2” thick material on either side of the channel. The “T-Slot” design can be used in conjunction with hold-downs. Will work with any standard 3/8” x 3/4” miter bar. Now you can add an INCRA T-Slot Miter Channel to any router table or user-made fixture for use with your miter gauge, feather boards, hold-downs or sliding jigs. Works with INCRA Miter Sliders and INCRA Miter Gauges or any standard 3/8-inch by 3/4-inch miter bar. T-Slot design for hold down capability. Mounts easily with pre-drilled holes and included fasteners. Hard anodized aluminum for durability. -
Out of stock
- Vertical Feather Boards allow for more consistent cuts when routing
- Feather boards press the work piece to the table for more accurate routing
- Vertical Feather boards come in a set of 2
-
Magswitch Resaw Guide – 8110125 Tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features- Fast, strong set up anywhere on a steel table or cast Iron fence.
- Roller bearing support for firm yet smooth gliding of wood through a blade.
- Angled Infeed/Outfeed to allow for blade drift adjustment.
- Includes all required attachment hardware (except base) and micro adjustment for fine tuning to 90 degrees.
- Ideal for resawing on band saws, oscillating spindle sander, or disc sander; and for infeed/outfeed support.
- Low profile design for use on your smallest tables.
-
Bits will produce super cuts on both surfaces of the rabbet. Can be used in joining boards or for letting in back panels. Cuts all composition materials, plywood, hard wood and soft wood. Used on hand held and table mounted portable routers. 1/2" bearing, 3/8" rabbet -
This veneer Press Clamp is used to make custom veneering frames and other clamping fixtures by simply drilling a hole in the frame material to accept the threaded bushing. Double handle design produces greater torque and heavy-duty Acme threads ensure smooth operation. Removable swivel makes installation quick and easy. Overall length is 11-1/2". Veneering frame not included. -
Mechanix Wear M-Pact 2
Item #: MP2-55
There is no limit when it comes to protecting your hands from impact. The M-Pact 2 features an accordion knuckle with EVA foam padding and Thermal Plastic Rubber finger guards to protect against blunt force impact. Your palm is fully protected with anatomical palm padding and an XRD impact pad, which reduces shock and vibration. This design is engineered for an unbelievable fit and maximum protection. High wear areas of the palm are reinforced and padded with XRD performance cushioning to reduce hand fatigue in the field and a molded Neoprene cuff provides a seamless fit to the wrist. Durable Armortex fingertips improve your gripping power in dry, oily and wet conditions. And for service members, the M-Pact 2 also comes in a Covert style that provides improved trigger finger mobility by leaving the index finger free from TPR for equipment handling. Mechanix Wear understands the importance of having the right tools for the mission, and this glove does not disappoint. Whether you are in law enforcement, the racing industry or have a need for industrial safety, the M-Pact 2 has you covered. Features- Mechanix Wear recommended uses: Maintenance & Repair, Construction, Heavy Equipment Operation, Manufacturing, Towing & Transportation, Vehicle Extrication, Search & Rescue, Oil & Gas, DIY Home Improvement
- Mechanix Wear recommended uses for M-Pact 2 Covert: Military, Law Enforcement, Search & Rescue, Maintenance Repair Operations
- Accordion knuckle guard with high density EVA foam padding absorbs impact
- Thermal Plastic Rubber (TPR) finger guards and metacarpal protection prevent impact injuries
- TPR closure with hook and loop provides a secure fit
- Armortex fingertips provide durable gripping power
- Anatomically designed palm padding with high density EVA foam
- Extended Neoprene cuff provides added protection
- 4 mm XRD impact pad reduces shock and vibration
- Moisture wicking TrekDry material helps keep hands cool and comfortable
- Covert MP2-55 design also includes 2 mm EVA foam padded index finger and nylon cord loop for convenient glove storage
- Machine washable
- Imported
-
Magswitch Dual Roller Guide – 8110130 Tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features- Fast, strong set up anywhere on a steel table or cast iron fence.
- Features a dual set of roller bearing supports for firm yet smooth gliding of wood through a blade.
- Includes micro adjustment for fine tuning to 90 degrees.
- Ideal for resawing on band saws, a second hand to support raised/long or tall panels on table saws, general infeed outfeed support on tables or fences.
- Low profile design for use on your smallest tables.
- Includes all required attachment hardware (except base)..
-
- Versatile wood glue ideal for both interior and exterior applications
- 2 Pack Value Pack
- First 1-part water cleanup wood glue proven to be waterproof
- Non-toxic and solvent-free, it cleans up with water
- Features superior bond strength, longer open assembly time and lower application temperature | 32 Ounce Bottle
-
If you're planning on making a sliding jig or fixture for your woodworking shop, the INCRA Miter Slider is exactly what you need. These inexpensive aluminum runners adjust for PERFECT sliding action in any standard (or near standard) 3/4" by 3/8" miter gauge slot with just a twist of the wrist. They lock firmly in place with another twist of the wrist. Won't warp, shrink or swell like wooden runners. Includes plans for a wide variety of shop-made jigs and fixtures. Anodized aluminum for durability and beauty. Available in 18" and 24" lengths. Eliminate the tedious process of making, fitting and adjusting the wooden runners on your sliding table saw jigs. Just screw these special extruded aluminum runners to your jigs and you're ready. Miter sliders have unique expansion mechanisms in their body that perfectly adjust to any standard 3/4" x 3/8" miter gauge slot. Each Slider includes plans for building a variety of table saw jigs.