-
Out of stock
Fits most AAA, Delco, DeWalt, Excell, Simpson pumps This part has been replaced by part number 7113373 -
Fits most AAA, Delco, DeWalt, Excell, Simpson pumps
-
Sale!
Mini cut saw blade for non ferrous metals and plastics, plunge depth 1 inch. Pack of 2. -
Out of stock
Bosch TS1005 Zero Clearance Insert for 10" Table Saw Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.- Use for precision cuts at 90-degrees and reduces kerf clearance to thickness of blade
- Supports the work-piece closer to blade for less chip-out and splintering
- Reduces kerf clearance to the thickness of your blade
- Keeps blade clean by stopping sawdust from falling into the throat
- Supports the work-piece closer to blade for less chip-out and splintering
-
5 Pack of plastic bags for use with your T|Flux 5HP Dust Collector 48 gal. -
Out of stock
- Rubber-nozzle tool end sized for friction fit with the hose ports on most Bosch tools and attachments designed for dust extraction.
- Specially-sized back end accepts standard North American 1-1/4-Inch and 1-1/2-Inch vacuum hoses Tool Specifications Height: 8-Inch Length: 1.85-Inch
-
Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof.This waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature.Titebond III is non-toxic, solvent free & cleans up with water - safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards).Ideal for both interior and exterior applications - the ultimate in wood glue.You are purchasing two (2) sixteen ounce bottles. -
Why trust the operation of your Incra Miter Gauge or Miter Slider in just any miter track. The Miter Channel was designed with the same Incra quality and precision to act as the perfect guide for all of your miter needs. Each channel is constructed of hard anodized aluminum for durability with Incra's trademark gold finish. Mounting is easy with pre-drilled holes and included fasteners; simply cut a 1-1/8” wide, 1/2” deep groove in your table. Create a laminated fixture using 1/2” thick material on either side of the channel. The “T-Slot” design can be used in conjunction with hold-downs. Will work with any standard 3/8” x 3/4” miter bar. Now you can add an INCRA T-Slot Miter Channel to any router table or user-made fixture for use with your miter gauge, feather boards, hold-downs or sliding jigs. Works with INCRA Miter Sliders and INCRA Miter Gauges or any standard 3/8-inch by 3/4-inch miter bar. T-Slot design for hold down capability. Mounts easily with pre-drilled holes and included fasteners. Hard anodized aluminum for durability. -
Magswitch Ultimate Thin Stock Jig / Rip Guide – 8110362 Tool attachment is for use with the Magswitch Workholding System. No other tool like it in the industry! Three tools in one! Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features- Features a stepped side for most common sizes of 1/8, 1/4 and 3/8”. The opposite side is sloped for odd sizes up to ¾ inch.
- Features a fixed roller bearing and extends forward for accurate repetitive ripping of your thin stock.
- Ideal for thin stock hold down or infeed/outfeed on a table saw.
- Enhances safety by keeping your fingers away from the blade while also minimizing chatter for clean cuts.
- Fast, strong set up anywhere on a steel table or cast Iron fence.
- Low profile design for use on your smallest tables.
- Includes all required attachment hardware.
-
Six-inch diameter. Six-hole backing pad for hook and loop sanding discs. General-purpose rubber pad allows flat sanding without gouging. Fits Bosch sander models 1250DEVS, 3727DEVS and ROS65VC. -
Out of stock
Top mounted bearings on bits make them ideal for lettering or other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywood, hardwood and soft wood. Use on portable or table mounted routers for template work.- Imported
- The product is 3/4x1 Top Bearing Bit
- Easy to use
- The product is manufactured in Italy
- Kickback reducing design
- Individually computer balanced
-
The GrabberPLUS offers an upgraded safety solution to the Grabber family of Milescraft push blocks. It’s great for extra control when using router tables, table saws, jointers, and bandsaws. The high-friction, diamond grip prevents boards from slipping. The added spring-loaded retractable heels secure the ends of your workpiece and guide it through your cut. The GrabberPLUS is a must-have for every woodworker!Spring-Loaded, Retractable Locking Heels
- Increase control and stability during cuts to eliminate tear-out when ripping or routing
Diamond Grip Rubber Bottom
- Non-marring, non-slip TPE material provides maximum control to safely hold your workpiece in place
Ergonomic, Tilted, Comfort Grip Handle
- Provides superior control and maximum grip, while keeping your hands away from the cutting tool and providing increased directional force against the fence
Durable Body
- Provides maximum durability to safely control your workpiece in all applications
- High visibility yellow makes it easy to find in busy shops
Safety Tips
- Ensure GrabberPLUS is firmly and securely on the workpiece
- Ensure a safe distance between the saw blade and the edge of GrabberPLUS
- Always ensure sufficient downward, forward, and side pressure
- Check and clean diamond grip pad with compressed air, or if that is not available, with water and soap, as necessary
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov/product
