Magswitch

Out of stock

8100514 MAGSWITCH MAGJIG 60 KEYCHAIN

$17.90
Magswitch MagMount 60 Keychain features is our novelty size MagMount featuring 60 lbs of magnetic strength. Rotate the knob to turn On/Off 60 pounds of magnetic hold force.
Features

Use in your custom jigs and fixtures by drilling a 25mm hole using a Forstner bit into standard ¾” stock.

Designed with screw holes and convenient keychain mount.

Holds flat and round surfaces of steel.

Magnet turns completely On and Off.

Magnet stays clean.

Does not use an electrical power source.
Details
8110131 MAGSWITCH REVERSIBLE FEATHERBOARD

$20.99
Magswitch Reversible Featherboard – 8110131 Tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features

Fast, strong set up anywhere on a steel table or cast iron fence.

Not limited by the miter slot.

Featherboard is reversible for left and right hand feeds.

Accommodates the Vertical Featherboard Attachment for an added dimension of safety and protection against kickbacks.

Low profile design for use on your smallest tables and fences.
Add to cart Details
8110362 MAGSWITCH ULTIMATE THIN STOCK JIG/RIP GUIDE

$25.99
Magswitch Ultimate Thin Stock Jig / Rip Guide – 8110362 Tool attachment is for use with the Magswitch Workholding System. No other tool like it in the industry! Three tools in one! Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features

Features a stepped side for most common sizes of 1/8, 1/4 and 3/8”. The opposite side is sloped for odd sizes up to ¾ inch.

Features a fixed roller bearing and extends forward for accurate repetitive ripping of your thin stock.

Ideal for thin stock hold down or infeed/outfeed on a table saw.

Enhances safety by keeping your fingers away from the blade while also minimizing chatter for clean cuts.

Fast, strong set up anywhere on a steel table or cast Iron fence.

Low profile design for use on your smallest tables.

Includes all required attachment hardware.
Add to cart Details
8110125 Magswitch Resaw Guide

$30.99
Magswitch Resaw Guide – 8110125 Tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features
- Fast, strong set up anywhere on a steel table or cast Iron fence.
- Roller bearing support for firm yet smooth gliding of wood through a blade.
- Angled Infeed/Outfeed to allow for blade drift adjustment.
- Includes all required attachment hardware (except base) and micro adjustment for fine tuning to 90 degrees.
- Ideal for resawing on band saws, oscillating spindle sander, or disc sander; and for infeed/outfeed support.
- Low profile design for use on your smallest tables.
Add to cart Details
8110130 MAGSWITCH DUAL ROLLER GUIDE

$31.99
Magswitch Dual Roller Guide – 8110130 Tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Mounting Base and MagJigs (each sold separately). Features
- Fast, strong set up anywhere on a steel table or cast iron fence.
- Features a dual set of roller bearing supports for firm yet smooth gliding of wood through a blade.
- Includes micro adjustment for fine tuning to 90 degrees.
- Ideal for resawing on band saws, a second hand to support raised/long or tall panels on table saws, general infeed outfeed support on tables or fences.
- Low profile design for use on your smallest tables.
- Includes all required attachment hardware (except base)..
Add to cart Details
81101302 MAGSWITCH VERTICAL FEATHERBOARD PRO

$69.95

MAGSWITCH VERTICAL FEATHERBOARD PRO

–

81101302

The Pro Vertical Featherboard is a table saw safety attachment which pushes the workpiece down against the table during feeding to prevent ride-up and kickback. Attach it to ferrous Biesemeyer-style table saw fences between the low-friction guide faces and adjust the feathers vertically to match the height of the workpiece. It can be paired with a second Pro Vertical featherboard for downward pressure on a work piece before and after the saw blade.

Add to cart Details
8110328 – MAGSWITCH PRO TABLE FEATHERBOARD

$72.95
Magswitch Pro Table Featherboard – 8110328 does the job of 3 featherboards and has a greater holding power and safety, anywhere you need it. It adds to your safety and quality of cut. Features
- Accepts the Magswitch Vertical Attachment with Risers for holding down as well as in to the fence.
- Acts as the base of an adjustable stackable featherboard for tall pieces.
- Features two powerful 30mm Magswitch magnets.
- Versatile — no miter slot limitation.
- Fast, accurate positioning.
- Cut wider material.
- Can be place beyond the miter slot.
- Provides powerful control.
- Easy on/off operation.
Add to cart Details
8110005 – MAGSWITCH MAGJIG 150 (2 Pack)

$79.00
The Magswitch MagJig 150 secures your fixture into place. Rotate the knob to turn On/Off 150 pounds of magnetic hold force. Simply drill a hole in a fixture and place the MagJig 150 in to use for downward pressure clamping. Features

Use in your custom jigs and fixtures by drilling a 40 mm hole using a Forstner bit into standard ¾” stock.

Drill as many holes as you want for as much strength and flexibility as you need by simply dropping in MagJigs. We recommend use of two per fixture to avoid pivot.

Create fences, assembly jigs, cutting fixtures, blade guards, work supports or anything that makes your work faster, safer and easier.

Excellent for woodworking, welding and fabrication.

Designed with screw holes to add more security in a fixture.

Holds flat and round surfaces of steel.

Magnet turns completely On and Off.

Magnet stays clean.

Does not use an electrical power source.

You are purchasing two switches.
Add to cart Details
8100377 MAGSWITCH MAGJIG 235

$85.00
MagJig 235 secures your fixture into place. Rotate the knob to turn On/Off 235 pounds of magnetic hold force. Simply drill a hole in a fixture and place the MagJig 235 in to use for downward pressure clamping. Features
- Use in your custom jigs and fixtures by drilling a 56 mm hole using a Forstner bit into standard ¾” stock.
- Drill as many holes as you want for as much strength and flexibility as you need by simply dropping in MagJigs. We recommend use of two per fixture to avoid pivot.
- Create fences, assembly jigs, cutting fixtures, blade guards, work supports or anything that makes your work faster, safer and easier.
- Excellent for woodworking, welding and fabrication.
- Designed with screw holes to add more security in a fixture.
- Holds flat and round surfaces of steel.
- Magnet turns completely On and Off.
- Magnet stays clean.
- Does not use an electrical power source.
https://magswitch.com/product/magjig235/#tab-downloads
Add to cart Details
81101303 MAGSWITCH UNIVERSAL FEATHERBOARD PRO

$94.00
The all NEW Magswitch Universal Featherboard Pro provides strong featherboard force against the table saw fence in either left handed or right handed positions. Wide base magnets and gaskets provide excellent grip even when placed over the table saw miter slot. Additionally two micro adjustable bump feet allow the tool to function as a versatile stop for cross cuts and slots.
FEATURES
- Compressible gaskets provide excellent grip when magnets are engaged.
- Increased width for stability.
- Magnet footprint spans most miter slots.
- Functional in left or right-handed positions.
- Two smooth bump stops with independent adjustability using thumb wheels Knobs improve visibility of magnet ON/OFF state.
Add to cart Details
81101304 MAGSWITCH UNIVERSAL SAW INDICATOR

$95.95
The Universal Saw Indicator is used to measure alignment of the table saw blade relative to the table (and the miter slot) to allow fine adjustment of blade parallelism. When adjusting fence spacing relative to the blade, it can also be used to measure very small changes in fence parallelism . Attach it to steel cross fences (which ride in the miter slot) or to ferrous table saw tables. The indicator is attached via an adjustable slot, allowing it to slide to fit a wide variety of miter slot spacings.
FEATURES
- Works with cross fences for easy measurement of table and blade alignment.
- Allows for micro adjustment of the table saw fence in any position.
- Fast actuation of 2 magnets with a linked push pin.
- Compatible with a wide variety of table saw makes and modes.
SPECS
- Nominal Max Breakaway Force: 120 lbs/ 54 kg
- Nominal Maximum Shear: 18 lbs / 8.1 kg
- Net Weight: 1.2 lbs / 0.55 kg
- Footprint: 4.9″ x 5.9″/ 125 mm long x 150 wide
Add to cart Details
Magswitch Re-saw Guide w/ Universal Mounting Base

$179.00

The Magswitch Resaw Guide tool attachment is for use with the Magswitch Workholding System. Mounts to the Universal Mounting Base and MagJigs . Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence. Features roller bearing support for firm yet smooth gliding of wood through a blade. Angled Infeed/Outfeed to allow for blade drift adjustment. Includes micro adjustment for fine tuning to 90 degrees. Ideal for resawing on band saws, oscillating spindle sander, or disc sander; and for infeed/outfeed support. Low profile design for use on your smallest tables.
What's included:

8110112 – qty 1 Universal Mounting Base

8110005 – qty 2 MagJig 150

8110125 – qty 1 Resaw Guide

8110178 – qty 1 Vertical Featherboard with Risers

Add to cart Details

MAGSWITCH VERTICAL FEATHERBOARD PRO

–

81101302

FEATURES

FEATURES

SPECS