-
-
-
- Converts 12-inch planer for dust collection
- 4-inch Outlet
- Fits most 4-inch dust collector hoses
- Provides for a cleaner and safer work area
- Measures 15 by 10 by 7 inches; weighs 2.7 pounds
-
-
DELTA 31-817 80 Grit Pre-Cut Sanding Strips for Models 31-250, 31-255 Wide Drum Sanders. Pre-cut to fit the 5-inch diameter by 18-inch wide drums of the 31-250 and 31-255 wide drum sanders, these cloth-backed strips come four to a pack. Coated with aluminum oxide abrasives for long life and smooth finish. Includes four cloth-backed sanding strips.
-
The DELTA 31-819 120 Grit Pre-Cut Sanding Strips is designed specifically for the DELTA 31-250 Wide Drum Sander. Installation is simple thanks to the cloth-backed strips being pre-cut for the 5-inch diameter and 18-inches wide drum. The strips are coated with aluminum oxide abrasives for long lasting, effective sanding. The 120 grit sanding strips leave a fine finish. Includes four strips.
- Pre-cut sanding strips for DELTA 31-250 Wide Drum Sander
- Cloth-backed strips
- Aluminum oxide abrasive for long lasting sanding effectiveness
- 120 grit leaves a finer finish
- Four strips included
-
The Delta 50 in. T-Square Fence and Rail system fits the Delta Unisaw. It comes with the fence, rails and table legs. It has laminated 9 ply birch plywood sides for durability and non-marring.
- One piece 14 gage 2 by 3" rectangular steel guide tube, mounted to on 1/4" section angle iron rail.
- Fence body constructed of 14 gage welded steel.
- Fence securely clamps to both front tube only to insure perfectly parallelism to the blade front to back.
-
This 4-pack of DELTA 31-818 100 Grit Pre-Cut Sanding Strips are designed to work with the DELTA 31-250 Wide Drum Sander. These cloth-backed strips come precut (5 x 18 inches) to the proper length and come coated with aluminum oxide abrasives for long life and smooth finish.
- 4-pack of cloth-backed sanding strips
- Designed to work with the Delta 31-250 and 31-255 Wide Drum Sanders
- Pre-cut to the proper length
- Aluminum oxide abrasives for long life and a smooth finish
- 100 grit
-
-
Delta’s 36-L552 left tilt cabinet saw is ideal for woodworking, cabinet making, and boat building. It features up-front dual-crank controls with locking cams, speedometer style scales and a 52 inch Biesemeyer fence. The 5HP 220V motor cuts hardwoods and engineered products like MDF and melamine. The riving knife enables tool-less adjustment for through- and non-through cuts including grooves for shelves and picture frames as well as dadoes, rabbets, and cheek cuts for furniture. The single-cast trunion provides increased vibration control. Largest throat plate in category eases blade changes. Storage under the table board is convenient and expandable. Bi-level dust extraction improves dust collection. The 36-L500 is one of several pieces that make the 36-L552.
- Single-cast trunnion system results in incredible vibration control providing continuous smooth operation and dependable accuracy
- Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
- The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4 degree
- The Cabinet Construction consists of a large cast-iron base providing stability and solid footing; True american marathon motor provides added power and is available in both 3 and 5 hp
-
-
Heavy Duty Oscillating BENCH Spindle Sander; 1/2 HP, 115V, 29 OPM; Precision Ground Cast Iron Tilting Table; 5 interchangeable threaded spindles, 1/4-Inch, 1/2-Inch, 5/8-Inch, 1 1/2-Inch and 2-Inch; 4 table inserts; Dust Port and onboard storage. Features: --Powerful 1/2 HP, 115V motor with 1,725 RPM spindle speed and 29 oscillations per minute --Fully enclosed, heavy-duty steel frame construction for minimum vibration --14-3/4-in x 14-3/4-in precision ground cast-iron table --15/16-in oscillating action uses more of the sleeve, prolonging the life of the sleeve --Positive stops at 90 degrees and large bevel scale for accuracy and convenience --Heavy-duty, steel table support and bevel system provides increased stability and long-lasting durability --Twin locking handles for stability in bevel position --Smooth precision ball bearings support the main spindle, and heavy-duty worm and gear mechanism drives the oscillations.
- Motor: 1/2 HP, 115V, 1 Phase
- Speeds: 1,725 RPM, 29 OPM with 15/16 in. oscillation length
- Table: 14 3/4 in. x 14 3/4 in., tilting, precision ground cast iron
- Table Height: 18 in.
- Opening Diameter for Inserts: 5 1/2 in.
- Spindle Length: 5 1/2 in.
- Dust Port: 2 1/4 in., included adaptor for up to 4 in.
- Base Dimensions: 14 1/2 in. depth x 14 1/2 in. width