Grizzly

Grizzly G0803Z – 9″ Benchtop Bandsaw with Laser Guide

$399.99
G0803Z 9" Benchtop Bandsaw with Laser Guide

Superior cutting performance and portability with enough power to not bog down even on hardwoods.
The Grizzly G0803 that was awarded as Top Value by Wood Magazine for its combination of features including an efficient 1/3 HP motor, heavy-duty feel and portability has been upgraded with a new laser guidance system and adjustable blower to provide superior cutting visibility. The G0803Z 9" Benchtop Bandsaw with Laser Guide features a 62-inch blade and accepts blades from 1/8" to 3/8" wide. It can cut pieces up to 3-1/2" high and has enough power to cut through green woods and other dense materials. The rack-and-pinion table tilt system makes it easy to cut beveled edges. The blade guard is also rack-and-pinion making adjustment an easy one-handed operation. The quality design and construction of the G0803Z assures easy, accurate cuts including fine detailed cuts without the vibration found in other benchtop models. Blade tension and tracking adjustments are simple as turning the respective blade adjustment knob. The small footprint and top handle make moving the bandsaw around your workspace easier. The saw weighs less than 50 lbs. so you can also effortlessly move it between your home, shop or job site. Because of the compact size, the bandsaw will arrive about 80% assembled. It will include a comprehensive operation manual written by our U.S. based Technical Documentation Department making set up a breeze. Like all Grizzly drill bandsaws, the G0803Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the bandsaw are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS:
- Motor: 1/3 HP, 120V, single-phase, 2.8A
- Max. cutting width left of blade: 9"
- Max. cutting height (resaw capacity): 3-5/8"
- Blade guides: Ball-bearing upper & lower
- Table size: 12" x 12"
- Table tilt: 0 - 45°
- Blade size: 61-13/16" - 62-3/16" (1/8" - 3/8" wide)
- Blade speed: 2460 FPM
- Overall dimensions: 20-3/4" W x 17" D x 29-1/2" H
- Footprint: 6-1/2" x 15-1/2"
- Approximate shipping weight: 49 lbs.
FEATURES:
- Laser Sight
- Adjustable Wheels for Alignment/Coplanarity
- Fence Adjustable for Blade Lead
- Rack & Pinion Table Tilt
- Ball-Bearing Blade Guides
- Quick-Release Blade Tension Lever
- Extruded Aluminum Rip Fence with Camlock Handle
- Lower Wheel Brush to Prevent Build-Up of Dust/Pitch on Wheel
- 2" Dust Port
- Chip Blower
- Work Light
Add to cart Details
Grizzly G0651-10″ 3 HP 220V Heavy Duty Cabinet Table Saw w Riving Knife

$3,129.99
Cut panels and wide stock all day long with this 10" Heavy-Duty Cabinet Table Saw. A 52" rip capacity and extended side and rear tables will support a full sheet of plywood, making ripping and cross cutting operations safe and simple. A guard with splitter or interchangeable riving knife helps prevent binding and kickback, and a rail mounted magnetic switch with thermal overload protection provides additional safety features. Bevel cutting is also safe and precise with the left tilting blade and digital angle display. Includes a miter gauge and 10" blade. CSA certified meeting CSA C22.2 #71.2-08 and UL 987 standards! SPECIFICATIONS:
- Motor: 3 HP, 220V, single-phase, 13A
- Rip capacity: 52" right, 18" left of blade
- Max. depth of cut @ 90°: 3-3/16"
- Max. depth of cut @ 45°: 2-3/16"
- Table size with extensions: 75-3/4" W x 27" D
- Distance from front of table to center of blade: 14-7/8"
- Floor-to-table height: 34-7/8"
- Arbor diameter: 5/8"
- Arbor speed: 4000 RPM
- Max. width of dado: 3/4"
- Overall dimensions: 91-1/2" W x 75" D x 40-5/8" H
- Footprint: 22-7/8" L x 21" W
- Approximate shipping weight: 716 lbs.
FEATURES:
- Digital readout for bevel angle
- Precision-ground cast-iron table
- Cast-iron trunnions
- 3/8" x 3/4" T-slots & miter gauge
- 4" Dust port
- Poly-V serpentine drive belt
- Steel cabinet with hinged motor cover
- Right hand and rear extension tables
- Magnetic switch with thermal overload protection and lock-out padlock
- Quickly changes between riving knife and blade guard/spreader assembly
- Certified to UL & CSA standards
- Includes 10" x 40T blade & push stick
Add to cart Details
G1023RL Grizzly 3 HP Cabinet Left Tilting Table Saw, 10″

$2,750.00

Grizzly Industrial, Inc. has grown into one of the largest machinery companies in the United States. Their products can be found in all sizes of shops from the large industrial production users to the smaller cabinet and machine shops. They have the widest product selection under one brand in the world.

Add to cart Details
Sale!

G1023RLX Grizzly Cabinet Left-Tilting Table Saw, “

~~$2,890.00~~ $2,690.00

G1023RLX 10 foot 3 HP 220V Cabinet Left-Tilting Table Saw

This is the one you've been waiting for. Featuring 53 inches of rip capacity, a quick-release bade guard, interchangeable riving knife, encapsulated-blade dust extraction, and a highly efficient serpentine belt/pulley system that runs much quieter and smoother than its predecessor. This left-tilting table saw includes the tremendously popular Shop Fox Classic fence and heavy-duty extension table. Best of all, everything is included for one low price, making this one of the greatest package deals available anywhere. It's CSA certified, meeting CSA C22. 2 #71.2-08 and UL 987 standards.

Construction

Precision-ground and heat treated solid cast iron table, cast iron trunnions and arbor assembly, all sealed ball bearings, one piece steel cabinet type stand and powder coated paint. Poly-V serpentine belt system transfers power more efficiently and with less noise than standard V-belts. Blade encapsulated below table for superior dust collection.

Riving Knife

Riving knife moves up, down and tilts with blade to ensure safe operation and prevent kickback. The quick release splitter guard makes it fast and easy to switch between riving knife and blade guard.

Add to cart Details
Sale!

Out of stock

GRIZZLY G0752 – 10″ X 22″ vARIABLE-SPEED LATHE

~~$3,514.00~~ $3,350.00
- Motor: 1 HP
- Swing: 9 in.
- Distance between centers: 22 in.
- Spindle bore: 25 mm
- Spindle type: Threaded
- Speeds: 100 – 2000 RPM
- Tailstock taper: MT#3
- Tailstock barrel travel: 2-1/2 in.
- Shipping weight: 453 lbs.
Details
Sale!

Grizzly Industrial G0860 1-1/2 HP Portable Cyclone Dust Collector (Used)

~~$1,395.00~~ $1,299.99
Customer return. Dings, dents, scratches, chipped paint, bent brackets, filter screen dent.

G0860 1-1/2 HP Portable Cyclone Dust Collector

For the shop tight on space needing a portable dust collector.
The G0860 1-1/2 HP Portable Cyclone Dust Collector features an impressive 868 CFM and up to 9.7" of static pressure, creating a vortex of incoming air that extracts heavy wood chips and large dust particles into a plastic-bag-lined steel drum. The remaining fine dust travels past the 12-3/4" aluminum impeller, is caught by a canister filter and then deposited in a separate plastic collection bag. The spun-bond polyester filter catches 99.9% of particles to 1-micron in size and is pleated to provide maximum surface area for efficient air flow. A turn of the crank handle rotates the paddle brushes, knocking caked-on dust off of the pleats to keep your CFM as high as possible. The collection drum features a quick-release handle that makes it easy to roll it out for sawdust disposal. This cyclone has a normal operating sound range of 78 dB, slightly quieter than a telephone dial tone.
A great value for the price and an upgrade over any single-stage unit.
Replacement T30314 Filters are available. The upgraded T30489 HEPA Filters are also available for those wanting to capture particles down to 0.3 microns. Like all Grizzly machines, the G0860 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The G0860 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your two-stage dust collection system. The Grizzly Customer Service and Technical Support Teams are U.S. based. Made in an ISO 9001 factory
SPECIFICATIONS
- Motor: 1-1/2 HP, 110V, single-phase, 15A
- Intake hole size: 6"
- Impeller: 12-3/4" aluminum
- Airflow capacity: 868 CFM @ 1.8" SP
- Max static pressure: 9.7"
- Filtration: 1-micron
- Filter surface area: 28.1 sq. ft.
- Collection size: 20-gallon drum
- Sound rating: 78dB
- Overall dimensions: 27-1/2" W x 44" L x 70" H
- Approximate shipping weight: 278 lbs.
FEATURES
- Collection drum with quick-release handle for easy disposal
- Two-stage operation for ultimate dust collection
- Swivel casters
- Lift handle and roll drum for easy sawdust disposal
- Pleated filter with paddle brushes and crank handle for max air flow efficiency
- Vacuum equalizer built into collection drum for use with disposable plastic bags
- Wireless remote control
Unit sold as is.
Add to cart Details
Grizzly G0709 – 14″ x 40″ Gunsmithing Gearhead Lathe

$8,199.99
G0709 14" x 40" Gunsmithing Gearhead Lathe

An accurate and powerful lathe.
What makes the G0709 14" x 40" Gunsmithing Gearhead Lathe a "gunsmithing" lathe is that it comes with features typically not found on standard lathes, such as the high-precision NSK bearings, extra-large 1-9/16" spindle bore and a "spider" mount system. The spider mount system has four brass-tipped screws that stabilize long shafting and rifle barrels through the outboard end of the spindle. Supplied with a 2 HP motor, the 8-speed gearhead of the G0709 produces spindle speeds from 70-2000 RPM. The tailstock lock system features a drive hub, which allows you to use a 1/2” torque wrench to clamp the tailstock in place at a pre-determined torque setting. This ensures consistent draw-down alignment every time, even with multiple lathe operators using the machine. The G0709 features a foot brake that also acts as a safety device and can bring the machine to an instant stop. The G0709 also comes with a D1-5 spindle, a 200 series quick change tool post, flood coolant system, LED work light, and a pull-out chip tray. Like all Grizzly gunsmithing lathes, the G0709 comes with a 1-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0709 manual was written by our U.S. based Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your lathe. The Grizzly Technical Support team is U.S. based. Parts and accessories for the lathe may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.
SPECIFICATIONS
- Motor: 2 HP, 220V, single-phase, 10A
- Swing over bed: 14"
- Distance between centers: 40"
- Swing over saddle: 13-13/16"
- Swing over cross slide: 8-13/16"
- Spindle bore: 1.57" (40mm)
- Spindle nose taper: MT#5
- Spindle nose: D1-5 Camlock
- Spindle speeds: 8, 70-2000 RPM
- Carriage travel: 36"
- Cross slide travel: 6-11/16"
- Tailstock barrel taper: MT#3
- Tailstock barrel travel: 3-15/16"
- Overall dimensions: 71-1/2" L x 26-3/16" W x 52" H
- Approximate shipping weight: 1550 lbs.
FEATURES
- Easy-to-use lever controls
- Hardened and ground cast-iron bed
- Cuts 4-112 Standard TPI and 0.1-7 Metric
- Cuts LH threads
- On/off reverse switch on carriage
- Socket for tailstock lock
- Cast aluminum gear cover
STANDARD EQUIPMENT
- 6" 3-Jaw chuck with reversible jaws
- 8" 4-Jaw chuck with independent jaws
- 11" face plate
- Steady rest/follow rest
- Full length splash guard
- Quick change tool post with 2 tool holders
- (2) MT#3 dead centers (1 carbide tipped)
- (1) MT#3 live center
- (1) MT#5 - MT#3 sleeve
- Pull out chip pan
- 1/2" drill chuck w/ MT#3 arbor
- Toolbox
Add to cart Details
Sale!

Grizzly G0592 10 x 18 2 hp Horizontal Metal Cutting Bandsaw

~~$7,099.99~~ $6,334.00
- Motor: 2 HP
- Cutting capacity - rectangular: 9-1/2 in.
- Cutting capacity - round: 10 in.
- Blade speeds: 98 - 394 FPM
- Blade length: 132 in.
- Head type: Swivel
- Footprint: 28-1/2 in. x 45 in.
- Overall height: 58 in.
- Shipping weight: 967 lbs.
Add to cart Details
Sale!

Grizzly G0701 – 19″ 5 HP Ultimate Bandsaw

~~$5,295.00~~ $4,990.00
The G0701 19" Ultimate Bandsaw is made for production work with its large cutting capacities, foot brake, resaw fence and motorized upper blade guide. The 5 HP motor powers through wood at a maximum 19-1/2" cutting capacity and the 18-3/8" throat is big enough for most applications. No more cumbersome two-handed height positioning! Simply toggle the switch up or down for motorized blade guide adjustments. The G0701 has an extra-wide 28" x 24" cast-iron table that can tilt from 5° left to 45° right. The cast-iron fence includes an extruded-aluminum resaw fence that attaches quickly and supports tall stock exceptionally well. The cast-iron table trunnions add additional weight for greater stability. You'll also appreciate the computer balanced cast-iron wheels with rubber tires for the smoothest operation possible, blade tension gauge and rack and pinion table tilt adjustment. Made in an ISO 9001 factory CSA certified
SPECIFICATIONS:
- Motor: 5 HP, 230V, single-phase, 22A
- Guide post motor: Universal DC, 40W
- Cutting capacity/throat: 18-3/8"
- Maximum cutting height: 19-1/2"
- Table size: 28" x 24"
- Table tilt: 5° left, 45° right
- Floor to table height: 35-1/4"
- Blade size: 166–168" long
- Blade width range: 3/8 – 1-3/8"
- Blade speed: 4975 FPM
- Footprint: 31" x 23-1/2"
- Overall size: 86-1/2" H x 36-5/8" W x 33" D
- Approximate shipping weight: 810 lbs.
Add to cart Details
Grizzly G1183 – 6″ x 48″ Belt/12″ Disc Combo Sander

$1,195.00
G1183 6" x 48" Belt/12" Disc Combo Sander

Built to the scale and level of quality professional woodworkers and metalworkers demand.
The heavy-duty G1183 6" x 48" Belt/12" Disc Combo Sander features a sanding belt that operates horizontally, vertically or at any angle in between. The sanding belt speed is 5000 FPM and the disc speed is 3450 RPM. Both cast-iron tables tilt for any job. The belt sander table tilts 90° while the disc sander table tilts 30° left and 45° to the right. The convenient, quick-release lever makes tension adjustment and belt changes and a snap. There is a full range of replacement sanding belts and sanding discs for the G1183. Belt rollers have shielded ball bearings and the top roller has a fine-tuning knob for precision tracking. The base accepts 5/8" fasteners for mounting to workbench. Like all Grizzly combination sanders, the G1183 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G1183 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your sander. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the combination sander may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory
SPECIFICATIONS:
- Motor: 1 HP, 110V/220V, single-phase, 12A/6A
- Sanding belt size: 6" x 48"
- Sanding belt speed: 5000 FPM
- Belt platen size: 6" x 14-1/2"
- Belt table size: 7" x 12-1/2"
- Disc diameter: 12"
- Disc backing type: PSA
- Disc speed: 3450 RPM
- Disc table size: 7" x 16-1/2"
- Table tilt 30° L, 45° R
- Number of dust ports: 2
- Dust port sizes: 2-1/2", 3"
- Footprint: 17" x 14"
- Overall dimensions: 32-1/2" W x 16-1/2" D x 29-1/2" H
- Approximate shipping weight: 148 lbs.
FEATURES:
- Quick belt release
- Disc table positive stops at 90°
- Belt table positive stops at 45° and 90°
- Two cast-iron tables
- Top roller has fine tracking knob
- Miter gauge included
Add to cart Details
Grizzly Industrial G0839P – 6″ x 79″ Edge Sander – Polar Bear

$1,055.00

1-1/2 Horsepower 6" x 79" Wood Edge Sander with Extra Large Tables
This 6" x 79" Edge Sander will shift your expectations of what an edge sander should be. The pivoting motor and platen design makes horizontal-to-vertical position changes a breeze, and with 3-1/2" of vertical edge-table travel and the ability to tilt both edge-table and end-table from 0-45°, you'll have all the angles covered. The 6" x 79" belt rotates around a 2-3/4" end roller for tight radius sanding, and belt tracking and tension are easily adjustable with conveniently located lock knobs.

Add to cart Details
Sale!

Grizzly G0623X – 10″ 5 HP Sliding Table Saw

~~$5,470.99~~ $4,995.00
- Motor: 5 HP
- Tablesaw type: Sliding
- Blade size: 10 in.
- Maximum cutting height @ 90deg: 3-1/8 in.
- Maximum cutting height @ 45deg: 2-1/4 in.
- Maximum ripping capacity - right: 33 in.
- Table type: Precision-Ground Cast Iron
- Overall table size: 47 in. x 40 in.
- Shipping weight: 688 lbs
Add to cart Details