- Motor: 1/2 HP
- Power Requirement: 120V, Single-Phase, 60 Hz
- Swing: 34 in.
- Type: Radial
- Range of Spindle Speeds: 550 – 3000 RPM
- Drilling Capacity: 1/2 in. in Steel
- Drill Chuck Type: JT33 Key Chuck
- Quill Diameter: 1.575 in.
- Shipping weight: 147 lbs.
-
Sale!
-
- Motor: 7.5 HP
- Tablesaw type: Cabinet
- Blade size: 12 in.
- Maximum cutting height @ 90deg: 4 in.
- Maximum cutting height @ 45deg: 2-3/4 in.
- Maximum ripping capacity - right: 36 in.
- Table type: Precision-Ground Cast Iron
- Overall table size: 48-1/4 in. x 30 in.
- Shipping weight: 698 lbs.
-
G0453Z 15" 3 HP Planer with Spiral Cutterhead
Upgrade to a spiral cutterhead with power to spare.
The G0453Z 15" 3 HP Planer with Spiral Cutterhead recognized ahead of the rest of the 15" planers tested by WOOD Magazine for its combination of clean cuts and the ability to control snipe. The 4-row spiral cutterhead with 74 German-made indexable carbide inserts cut some of the finest surface finishes money can buy. Each insert can be rotated up to three times to expose a new sharp edge for superior finish. Reducing the cut to the size of a single insert makes for a cleaner cut and reduces noise compared to the traditional straight knife cut. The 3 HP motor spins the cutterhead at 4800 RPM to plane your stock up to 15" wide by 8" thick, cutting as deep as 1/8" per pass. Additionally, the G0453Z features a built-in mobile base, adjustable bed rollers, two-speed automatic board feed, and solid cast-iron extension wings. Like all Grizzly planers, the G0453Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0453Z manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your planer. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the planer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. CSA certified Note on replacement inserts:- Models manufactured April 2015 and later use H7319 (74) 14mm x 14mm x 2.0mm replacement inserts.
- Models manufactured March 2015 and earlier use T21348 (74) 14.17mm x 14.17mm x 2.0mm replacement inserts.
- Motor: 3 HP, 240V, single-phase, 15A
- Maximum stock width: 15"
- Maximum stock thickness: 8"
- Minimum stock thickness: 3/16"
- Minimum stock length: 8"
- Maximum cutting depth: 1/8"
- Cutterhead diameter: 3"
- Cutterhead type: 4-row spiral, 74 inserts
- Cutterhead speed: 4800 RPM
- Feed rate: 16 & 30 FPM
- Table size with extensions: 15" x 42"
- Dust port size: 4"
- Footprint: 22" x 22-1/2"
- Overall dimensions: 32-1/2" W x 42" D x 45-7/8" H
- Approx. shipping weight: 672 lbs.
- Board return rollers
- Pedestal-mounted control panel
- Built-in mobile base
- Adjustable bed rollers
- Rubber-coated outfeed roller
- Built-in lifting rods
- Angled dust port hood
- Magnetic switch with thermal overload protection
- Four-column support with table locks
- Precision-ground, cast-iron table and extension wings
- Heavy-duty cast-iron construction
-
Out of stock
This 150 grit 6" X 186" high quality "J" weight sanding belt is cloth backed and lasts longer and sands smoother! -
Out of stock This 120 grit 6" X 186" high quality "J" weight sanding belt is cloth backed and lasts longer and sands smoother!
-
This 80 grit 6" X 186" high quality "J" weight sanding belt is cloth backed and lasts longer and sands smoother!
-
This 60 grit 6" X 186" high quality "J" weight sanding belt is cloth backed and lasts longer and sands smoother!
-
Sale!
G0555LX 14" 1 HP Deluxe Bandsaw
An upgraded version of a Grizzly classic.
Another great addition to our G0555 line of 14" bandsaws, the G0555LX runs quietly and cuts accurately with plenty of power to do crosscuts, scrolls, and resaw thick hardwoods. The bandsaw operates with minimal vibration for precision cutting thanks to the cast-iron frame and heavy-duty stand. The precision-ground cast-iron table tilts 45° right and 15° to the left. The sturdy T-shaped fence is designed for easy attachment and removal from the rails and has a magnified cursor scale for fast, accurate adjustments. For a full range replacement and resaw blades for the G0555LX, shop here. Ball-bearing rollers on the upper and lower blade guide assemblies are easy to adjust. Made from high-strength aluminum, three styles of premium blade guide kits add flexibility and accuracy to your 14" bandsaw. These kits are available in three styles: ball bearing, ceramic, and scrolling. The T25555 Riser Block Kit is available to increase the capacity of this bandsaw from 6" to 12". Prewired for 110V, the G0555LX can plug into a standard 110V wall receptacle. This machine can be converted to operate on a 220V power supply by referring to the voltage conversion instructions in the manual. The easy-to-read G0555LX manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The Grizzly Customer Service and Technical Support Teams are U.S. based. Like all Grizzly bandsaws, the G0555LX comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. -
Sale!
Need to sand wide panels or that live edge slab on your project list?
The open frame design of the G0920 22" Open-Ended Drum Sander allows you to sand workpieces up to 44" wide. Simply sand one half, turn the piece around and sand the other half. The 2 HP motor supplies plenty of power to rotate the 5" computer-balanced aluminum sanding drum. The variable-speed conveyor can be adjusted between 0–20 feet per minute. The digital depth gauge offers a precise reading of the distance between the table and the sanding drum. The spring-tensioned sandpaper fasteners make changing belts quick and simple. You’ll get precision results and long-lasting durability thanks to the drum height handwheel, industrial-duty rubber conveyor belt, heavy-duty enclosed stand, and easy conveyor belt tracking. Like all Grizzly drum sanders, the G0920 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0920 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your sander. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the sander are available online and shipped from the Grizzly parts warehouse in Springfield, MO.SPECIFICATIONS:
- Drum motor: 2 HP, 230V, single-phase, 7.5A
- Feed motor: 50W, 1A
- Maximum stock thickness: 5"
- Minimum stock thickness: 1/4"
- Maximum sanding width: 44"
- Minimum sanding width: 2"
- Minimum board length: 9"
- Sandpaper type: 3" width roll, plain backed
- Sandpaper speed: 2300 FPM
- Conveyor feed rate: Variable, 0–20 FPM
- Drum size: 5"
- Dust port size: 4"
- Footprint 23-1/2" x 32-1/2"
- Overall dimensions 42-1/2" W x 43-1/2" D x 61" H
- Approximate shipping weight: 341 lbs.
FEATURES:
- Variable-speed conveyor
- Digital thickness readout
- Spring-loaded sanding belt tension/sandpaper
- 4" Dust port with hose hook
- Industrial-duty rubber conveyor belt
- Push button circuit breaker for easy reset
-
- Motor size: 5 HP
- Tablesaw type: Cabinet
- Blade size: 10"
- Maximum cutting height @ 90deg: 3"
- Maximum cutting height @ 45deg: 2-1/8"
- Maximum ripping capacity - right: 60"
- Table type: Precision-Ground Cast Iron
- Overall table size: 74" x 27"
- Shipping weight: 550 lbs.
-
The best features of the contractor and cabinet saws combined.
The G0771Z 10" 2 HP Hybrid Table Saw blends the best features of the contractor-style table saw and cabinet-style table saw. Like the cabinet saw, it has an enclosed cabinet, heavy-duty cast-iron trunnions that mount to the cabinet and plenty of power to easily rip through hardwoods or cut dadoes. Like the contractor-style saw, it's still light enough to move where you need it and it's easy on the budget. The fence on this machine is also a hybrid of the best features we've had in the last 30+ years. These all-time best features include the easiest lift-off and simple adjustability of one fence, the rock-solid front locking ability of another and the accessory T-slots of a third. The research and development put into this finished fence creates a simpler and more enjoyable user experience. The G0771Z features an innovative quick-release blade guard and riving knife system that can be changed in seconds. A 4" dust port is integrated into the steel cabinet-type stand for maximum dust collection. The precision-ground cast-iron table exceeds 40" with the extension wings. To top it all off, it's prewired to run on an ordinary household 120V, 20A circuit! Like all Grizzly table saws, the G0771Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0771Z manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your saw. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the table saw are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. ETL certified Made in an ISO 9001 factory SPECIFICATIONS:- Motor: 2 HP, 120V/240V (prewired for 120V), single-phase, 15A/7.5A
- Rip capacity: 31" right, 16-3/4" left of blade
- Max. depth of cut @ 90°: 3-1/8"
- Max. depth of cut @ 45°: 2-1/4"
- Table size with extension wings: 40-1/2" W x 27" D
- Distance from front of table to center of blade: 15-1/2"
- Floor-to-table height: 35-3/8"
- Arbor diameter: 5/8"
- Arbor speed: 3450 RPM
- Max. width of dado: 13/16"
- Dust port size: 4"
- Overall dimensions: 64" W x 40-1/2" D x 36" H
- Footprint: 21" L x 19-1/2" W
- Approximate shipping weight: 330 lbs.
- Cast-iron table and extension wings
- Cast-iron trunnions
- Easy-glide fence system
- T-slot miter gauge
- Beveled front table edge
- Includes a 10" x 40T carbide-tipped saw blade
-
Sale!
Grizzly G0814X 6" Jointer W/Stand & V-Helical Cutterhead
An upgraded jointer with a V-helical cutterhead
Stepping up from our G0814 6" Jointer, the G0814X comes equipped with a 4-row V-helical cutterhead for unmatched finish and long-lasting cutter edge durability. The V-helical cutterhead features 24 indexable carbide inserts that can each be rotated up to 3 times to expose a new sharp edge. No more replacing or sharpening blades every time they get dull or nicked. You'll get quieter operation, and most importantly, a significantly better finish with less tear-out using this cutterhead vs. a straight-knife model. For increased mobility, the cabinet stand comes with a built-in mobile base. Engage the foot pedal caster to move your machine around. Lock the machine down when you are ready to work. The fence is fully adjustable from 45° to 135°. It has built-in stops at 45°, 90° and 135°. Like all of the Grizzly jointers, the G0814X comes with a 1-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0814X's manual is packed with useful information and the technical support team is U.S. based. Parts and accessories for the jointer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. Made in Taiwan SPECIFICATIONS:- Motor: 1 HP, 110V/220V (prewired 110V), single-phase, 14A/7A
- Maximum width of cut: 6"
- Maximum depth of cut: 1/8"
- Maximum rabbeting depth: 1/2"
- Cutterhead diameter: 2-1/2"
- Cutterhead type: 4-row V-helical
- Insert size & type: 15mm x 15mm x 2.5mm, indexable carbide
- Cutterhead speed: 5000 RPM
- Table size: 6-5/8" x 47-3/8"
- Table adjustment type: Handwheel
- Fence size: 29-1/8" x 4"
- Minimum stock length: 8"
- Minimum stock width: 3/4"
- Minimum stock thickness: 1/2"
- Dust port size: 4"
- Footprint: 13-1/2" x 18"
- Overall dimensions: 47-1/2" W x 20" D x 42" H
- Approx. shipping weight: 260 lbs.
- 4-row V-helical cutterhead with 26 indexable carbide inserts
- Cabinet stand with built-in mobile base
- Precision-ground cast-iron tables with dovetailed ways
- Heavy-duty center-mounted fence with stops at 45°, 90° & 135°
- V-belt drive system
- Cabinet-mounted power switch
- Includes two push blocks
-
G0603X 25" 15 HP 3-Phase Extreme Duty Planer w/ Helical Cutterhead
Precision planing with digital control.
The G0603X 25" 3-Phase Extreme Duty Planer has an incredible 15 HP motor to make quick work of those big planing jobs. The G0603X features a unique helical cutterhead with 170 inserts rotated at 15° for smooth shearing cuts - meaning you can say goodbye to tear-out - while having an ultra-quiet machine and a smoother finish. The digital controls to allow you to simply enter the thickness of the board you want or the amount you want to remove, which saves time and reduces waste. All controls are conveniently located. The segmented chip breaker leads directly into the dust hood with a 5” dust port to help ensure the work area stays as clear as possible. And because it's a Grizzly Extreme Series®, you can be assured that your machine will provide years of reliable service. Like all Grizzly planers, the G0603X comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0603X manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the planer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS:- Cutterhead motor: 15 HP, 220V/440V*, 3-phase, 37A/18.5A
- Table elevation motor: 1/2 HP, TEFC, 2.4A/1.2A
- Table size: 25" W x 57" L
- Maximum cutting width: 25"
- Maximum stock thickness: 9"
- Maximum cutting depth: 1/4"
- Minimum stock thickness: 1/4"
- Minimum stock length: 10"
- Feed rate: 20, 25 & 30 FPM
- Cutterhead: 6-row helical, 170 inserts
- Cutterhead speed: 4900 RPM
- Power transfer: Triple V-belt
- Overall size with infeed/outfeed tables: 60-1/4"H x 57-3/8"W x 54-3/8"D
- Approximate shipping weight: 2054 lbs.
- Segmented chip breaker
- Precision-ground cast-iron table
- 5" dust port
- Micro-adjustable table height
- Infeed roller is serrated steel
- Outfeed roller is finely finished steel
- Digitally controlled table elevation for extreme accuracy
- Adjustable bed rollers
- Easy access cutterhead
- 3-Speed (20,25,30) feed Rate
- Inch/metric readout
- Emergency stop button*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $250. Please contact Grizzly Technical Support at (570)546-9663 before placing your order.
-
Grizzly G0901 28" Portable Sawmill
Buy now to lock in the sale price! Orders won’t ship until Spring 2021
Mill your own lumber right off your property!
The all-new Grizzly G0901 28" Portable Sawmill is designed for quick setup with a rock-solid, 12-foot steel track with adjustable feet capable of leveling on just about any surface. The track is modular, allowing you to easily attach and level additional 6-foot-long sections in order to mill practically any length of lumber you need. The cut thickness is set in 1/16" intervals with the locking hand crank and the sturdy 4-column saw carriage moves smoothly along the track on ball-bearing rollers. Two adjustable work stops hold the log in place, while a manually adjusted workpiece clamp prevents movement during cuts. Our engineers worked hard to create the ultimate sawmill with the capacity and solid performance needed to get the job done right in the field! The G0901 28" Portable Sawmill comes with a one-year warranty which covers replacement parts. The product is supported by a US-based support team and parts are available online and shipped from our massive parts department in Springfield, MO. FEATURES:- Modular track system for varying length requirements
- Hand throttle allows easy blade speed control during the cut
- Locking hand crank with detents for quickly setting cut thickness in 1/16" increments
- Ball-bearing rollers provide smooth movement of saw carriage along track
- Leveling feet for stabilizing saw mill on uneven ground surface
- Adjustable work stops and clamp for holding log in place during cut
- Onboard water reservoir with drip nozzle for blade lubrication
- Gas engine: 13-1/2 HP Briggs and Stratton®
- Included track length: 144"
- Maximum log diameter: 28"
- Maximum cut width: 22"
- Maximum cut thickness: 6"
- Blade size: 1" x 144"
- Wheel diameter: 19"
- Footprint: 35" x 144"
- Overall dimensions: 75" W x 144" L x 56" H
-
Sale!
This machine is outfitted with stops and clamps, so you can quickly insert pre-cut boards, clamp them in place, and start cutting. With the ability to cut two joints at a time, these dovetail machines can produce a 4-sided drawer in under two minutes if the boards are prepared properly. Includes a 4-sided template for cutting 1", 1-1/2", 2", and 2-1/2" dovetails. Also spindle heads are micro-adjustable to give you complete control of dovetail "fit." -
Out of stock
This T1242 30-Ton Electric/Hydraulic Shop Press features a 3 HP, 220V, single-phase hydraulic pump motor, horizontally adjustable sliding piston head, easy-access push-button controls, 10" stroke, and table-to-piston distance of 7-3/4" to 39". Includes carriage/table lifting chain, two table plates, and a full-size rear guard plate. -
Sale!
G0632Z 16" x 42" Variable-Speed Wood Lathe
If you're looking for a lathe that will handle all of your turning needs, this is the one!
The G0632Z 16" x 42" Wood Lathe uses a variable-frequency inverter to control motor speed. The variable-frequency drive runs the 3-phase motor to provide variable-speed control and maximum torque at low speeds. The variable-speed control allows for spindle speed adjustment from 100–3200 RPM and the digital readout provides a precise reading of the current spindle speed. The headstock swivels for outboard turning and can be positioned anywhere along the bed for increased flexibility in workpiece setup. The swivel pin can lock the headstock at 0°, 45°, 90°, 135°, 180°, and 270°. The bed is precision-ground steel for strength and durability and the steel legs can be easily adapted for adding more mass. The tailstock, headstock, and tool rest support have lever-action cam locks for quick positioning.Aside from its large turning capacities, this machine has all of the features you would hope for in a heavy-duty wood lathe.
Like all Grizzly lathes, the G0632Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The G0632Z manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your lathe. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the lathe may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.SPECIFICATIONS:
- Motor: 2 HP, 220V, 3-phase, 8A
- Power requirement: 220V, single-phase
- Swing over bed: 16"
- Swing over tool rest: 11-1/2"
- Distance between centers: 42"
- Spindle taper: MT#2
- Spindle thread size: 1-1/4" x 8 TPI RH
- Tailstock taper: MT#2
- Spindle speed: Variable, 100–3200 RPM
- Headstock rotation: 0°, 45°, 90°, 135°, 180°, 270°
- Tool rest width: 14-1/8"
- Overall dimensions: 77-1/16" L x 22-1/16" W x 47" H
- Approximate shipping weight: 394 lbs.
FEATURES:
- Electronic variable-speed control
- Digital spindle-speed indicator
- 30° direct indexing using one indexing hole
- 10° indexing using all three indexing holes
- Headstock can be positioned anywhere along the bed
- Belt drive offers two speed ranges to maximize spindle torque
- Spindle lock pin
- Outboard spindle handle
- Forward/reverse switch
- Emergency stop switch
STANDARD EQUIPMENT:
- Spur center
- Cup live center
- Knockout tool
- Indexing pin
- Tool rest
- 6" face plate
- Hex wrenches
-
T10718 50" Deluxe Pan and Box Brake
Easily form transverse or down-flanged parts.
The T10718 50" Deluxe Pan and Box Brake is used to make straight bends, boxes, pans, and trays in sheet metal that is 12-gauge or thinner. Clamping fingers and bending blocks of different lengths can be arranged to make 90° bends of varying widths up to 50" wide. The fingers and blocks can be spaced in any configuration necessary to permit the sides of a box to be bent without interfering with previously bent sides. Setback and clamping pressure are easily adjusted for different workpiece requirements, and the adjustable bending stop is used to make repetitive bends of the same angle.Perfect for shops doing signs, fabrication, HVAC, or architectural sheet metal!
Like all Grizzly pan and box brakes, the T10718 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The T10718 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your pan and box brake. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the pan and box brake are available online and shipped from the Grizzly parts warehouse in Springfield, MO.SPECIFICATIONS:
- Maximum working width: 50"
- Maximum sheet metal thickness: 16-gauge mild steel at full width
- Maximum height of pan/box sides: 2"
- Minimum reverse bend: 5/8"
- Maximum bending angle: 135°
- Overall dimensions: 63" W x 38" D x 44-3/4" H
- Approximate shipping weight: 945 lbs.
-
This slider will allow you to crosscut sheets up to 63" x 106-1/4" and rip panels as wide as 33". This 7-1/2 HP workhorse has all of the user-friendly features you'd expect from an industrial-duty sliding table saw, like a scoring blade that eliminates tear-out, a miter fence with adjustable flip-stops, dust ports above and below the blade, riving knife, a standard rip fence, and a clamping hold-down system for the sliding table. For production ripping and crosscutting, every shop needs a sliding table saw, and the G0820 just might be the perfect fit. -
-
Sale!
This 3 sided, heavy-duty shaper will pay for itself quickly in cabinet and production shops that normally require several shapers or time consuming cutter changes. The combinations of cutters and set-ups you can utilize on this machine are endless. -
Out of stock
10 Horsepower 3-Phase 24" Wide Belt Wood Sander with Pneumatic Oscillation Control
These machines were developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. This collaboration resulted in the introduction of the G9962Z & G9962ZX, which have become the "staple" of the guitar building industry. The main features that enable these sanders to process short pieces efficiently are the single drum and double infeed and outfeed pressure rollers positioned close to the drum. The result is a continuous downward pressure on extremely thin stock as short as 9", which is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of hard rubber to prevent distortion of thin stock while sanding. Features include digital read out, powered table elevation, variable speed conveyor, disc brake stopping system, pneumatic belt tracking, pneumatic belt oscillation, and separate motors for the drum, feed rollers, and table elevation. -
Out of stock
The Grizzly Industrial G0445-24" 10 HP 3-Phase Platen Type Wide-Belt Sander machine was developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. The main features that enable it to process short pieces efficiently are the single drum and the double infeed and double outfeed pressure rollers that are tucked in closer to the drum. The result is that you have continuous downward pressure on extremely thin stock as short as 14" (G0582). That is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of harder rubber to prevent distortion of thin stock while sanding. The new platen model will sand stock as short as 9" (G0445). All of these models include features like digital read out, powered table elevation, four screw jacks for table support, variable speed, disc brake stopping system, dust proof photo electric eye/pneumatic control for belt oscillation, and separate motors for the drum, the feed rollers, and the table elevation. -
Out of stock
Features:
- Pneumatic Belt Tensioning
- Digital Readout and Elevation Controls Accurate to 0.005"
- Powered Table Elevation with Keypad for Typing/Storing Exact Measurements
- Industrial Rubber Conveyor Belt
- Micro-Adjustable Graphite/Felt Platen (Rear Drum)
- Variable Feed Speeds
- Disc Brake for Emergency Stops
- Independent Motor Controls for Sanding Drums, Table Elevation and Conveyor