-
Router Bits (16)
-
Router Mats (1)
-
The Freud 26-100 1/4-Inch Router Bit point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hard wood and soft wood. Use on portable routers for template work.
-
Out of stockThis kit is designed to mount your Clear-Cut Stock Guides to 1/2" to 3/4" thick stock which most shop made fences are made of. If you have a thicker fence that's not a problem, just substitute the 1/4"-20 X 2" hex head cap screws that come with the kit with longer screws available at most hardware and building center stores to accommodate the thickness of your fence.
-
Fisch Universal speed cutter Bits with center point, 2 cutters and 2 spurs are designed for drilling smooth and precise holes in soft and hard woods and laminates.
- Clean, precise pocket holes and skip free clean cutting edge
- CNC-Diamond ground and centrally ground center point
- Drop Forged from tool steel, for superior sharp edge retention.
- High performance design with center point, 2 cutters, 2 spurs and reduced cylindrical shank
- Drill up to 300 holes before resharpening is required; verified by independent test results
-
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
- The product is 1/2 inch diameter, 2 flute carbide flush trim router bit
- Easy and simple use kit
- The product is manufactured in Italy
- Kickback reducing design
- Individually computer balanced
-
Designed to cut deep or shallow ``V" grooves. Bits are used for sign making or for adding decorative accents to furniture and plaques. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
-
Out of stockFreud's precision ground carbide bits have a grain size smaller than other grades, and titanium is added making them impervious to chemical attack. Promoting safer woodworking is the reason Freud made a commitment to develop anti-kickback router bits. Bits are computer balanced to insure vibration-free operation at speeds that are a safe margin above the typical 22,000 RPMs of most routers. Freud's philosophy is woodworkers should expect safety, not pay for it. Over all diameter 3/4-inch, shank diameter 1/4-inch.
-
Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hard wood and soft wood. Use on portable routers for template work.
-
Freud’s solid carbide up spiral bits combine effective chip removal with a cut that can’t be matched by standard straight bits. Ideal for production settings. 1/8" Overall Dia (D), 1/2" Cutting Length (h), 1/4" Shank, 2" Overall Length (H), 2 Flutes Ideal For: Mortises, grooves, blind holes. Application: Cutting mortises and routing deep blind holes. Made In Italy.
-
Out of stockTop mounted bearings on bits make them ideal for lettering or other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywood, hardwood and soft wood. Use on portable or table mounted routers for template work.
- Imported
- The product is 3/4x1 Top Bearing Bit
- Easy to use
- The product is manufactured in Italy
- Kickback reducing design
- Individually computer balanced
-
Bits will produce super cuts on both surfaces of the rabbet. Can be used in joining boards or for letting in back panels. Cuts all composition materials, plywood, hard wood and soft wood. Used on hand held and table mounted portable routers. 1/2" bearing, 3/8" rabbet
-
Forms a single bead with a square shoulder. 1" Overall Dia (D), 9/16" Carbide Height (h), 1/4" Shank, 1/8" Radius ( R ), 2-3/16" Overall Length (H), 1/2" Bearing Dia (B) Ideal For: Decorative, rounded edges for any furniture or millwork project. Application: Matching moldings in historic homes. Made In Italy.
-
Part Number: 36-114C Item Weight: 2.31 pounds Item model number: 36-114 Material: Carbide
-
-
Part Number: 38-100C Item Weight: 1.85 pounds Item model number: 38-100 Material: Carbide
-
Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted routers. Quadra-cut Decorative edging for cabinets, molding and furniture Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted routers.
- Quadra-cut
- Decorative edging for cabinets, molding and furniture
- Cuts all composition materials, plywoods, hardwoods, and softwoods.
- Use on hand-held and table-mounted routers.
- Overall diameter: 1-3/8"
-
The Fisch Wave Cutter is a high performance, next generation Forstner Bit and is truly the world's best! Designed with the patented "Wave Cutter", this Forstner bit has been tested against other leading bits and has been and proven to drill 3 times the number of holes before needing to be re-sharpened.
- Suitable for hard and softwood, coated chip board, laminates as well as MDF plates
- High Rotation Speed
- Precise Cutting Quality
- Optimized cutting resulting in an improved running of your drill
- Can be resharpened up to 30 times before needing to be replaced
-
Out of stockFeatures:
- 3/8" thick phenolic with durable friction-free coating
- Convenient center-hole bushing used to align the router so it is centered in the bit hole
- Plate center-hole is machined to accept a 3-1/2" raised panel bit
- Two additional Tab-Loc insert rings to reduce the size of the bit opening
- Simple step-by-step instructions make accurately drilling and mounting any router easy
-
Out of stockFeatures:
- Unique roller system holds down workpiece and pushes into fence for precision stock feed
- 1-1/2" urethane one-way rollers set at 5° toward fence and 2-3/4" total adjustment
- Maximum stock thickness from router table surface to 9/16" below center of T-slot
- Compatible with most router table fences with a horizontal 1/4" T-slot above the fence faces
- Includes one infeed stock guide, one outfeed stock guide and detailed instructions
-
Out of stock
-
- Shims are included to allow adjustment of tongue thickness from 7/32" to 1/4" for maximum versatility and compatibility.
- Patented design allows these bits to produce a full 1-1/2" wide reveal for traditional raised panel doors.
- Included 54-562 radius backcutter gives double-sided appearance and can be replaced with optional 54-560 square backcutter for a more contemporary look.
- Cuts all composition materials, plywoods, hardwoods, and softwoods.
- Use on table-mounted portable routers.
-
Out of stockThis set is perfect for shaping moldings for fine furniture and other casework. The set consists of a cove cutter and six router bits with inverted profiles. The cove cutter mounts on your tablesaw and is used in conjunction with a pair of angled fences.
- Make crown molding that surpasses anything you'll find at the lumberyard.
- The set consists of a 7-inch diameter, 5/8-inch arbor cove cutter, six 1/2-inch shank router bits.
- Bits with inverted design, so your workpiece remains in contact with your router table for accuracy and control.
- For cutting plywood, hardwood/softwood on router tables only. Not for use on hand-held routers.
- CMT bits were rated the best overall in comparison to other brands