-
This 3" Segmented Diamond oscillating saw blade is ideal for removal of hardened, epoxy resin grout lines. Also suitable for very hard cement grouts or when carbide is just not holding up on those big jobs. The right choice for demanding and long jobs. Kerf is 3/32" for your standard grout lines. Fits all oscillating tools due to the Starlock system. -
StarlockPlus Oscillating Multi-Tool with snap-fit accessory change -
The FEIN FMM 350QSL START kit offers the powerful FMM 350QSL MulitMaster in a soft nylon bag with a Universal 152 blade, an unperforated triangle sanding pad and three sheets of each 80, 120 and 180 grit triangle sandpaper.- Lightweight and well balanced with soft grip
- Tacho generator and electronic control ensures constant speeds
- Design Reduces vibrations by up to 70% and noise up to 50%
- Features soft start with balanced armature and ball bearings for flawless operation
- StarLock system allows for change of accessories in less than three seconds
-
Out of stock
With this one all purpose blade you can rip & crosscut 2" - 3" thick hardwoods resulting in a smooth-as-sanded surface -
Out of stock
This blade for table and radial arm saws produces chipless, scratch-free, polished trim and cross cuts on hardwoods, softwoods, and plywoods. Its thin kerf reduces wood loss by 1/4, lessens "jump in" for better pull control, and virtually eliminates splintering and fuzz. -
Out of stock
The FEIN SuperCut AFSC 18 is the most powerful cordless oscillating tool in the market today. Working speed and performance are practically the same as the corded FSC 2.0Q model. Features:- Most powerful cordless oscillating tool in the market
- Lithium Ion technology with Fein high powered motor
- 40 years of experience in the Oscillating market
- Quick charger to help with continuous work
- Includes the flooring set
-
VY Classic ceiling tile hanger drivers allow drills or impact drivers to drive eye lag screws into wood or metal for ceiling tile instalation. They are designed to maintain fastener alignment while drilling. Built to withstand the high torque (rotational force) of impact drivers, Impact Plus (Registered Trademark). Manufactured from alloy-steel for extra strength and durability. IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. -
IVY Classic’s Wood Chisels are constructed of precision ground, drop-forged chrome vanadium tool steel for strength and hardness. The ergonomic handle is made of impact resistant PVC for optimal control and features a steel striking cap which protects the chisel handle. The heavy-duty blade bolster solidly transfers the impact force from the handle to the cutting edge. This chisel comes with a reusable plastic blade guard for safety and is available in range of sizes. IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. -
-
IVY Classic Non-Magnetic Spring Nut Setters are designed to securely hold stainless steel hex head screws and nuts using a ball with spring retention The Alloy-Steel body is designed to withstand the high torque (rotational force) of impact drivers, Impact Plus (Registered Trademark). Our lobular design reduces the stripping of the corners of the nut, fasteners are driven on their flat sides instead of their corners. IVY Classic Industries manufactures an extensive line of nut setters in a variety of sizes and lengths. IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. -
IVY Classic Non-Magnetic Spring Nut Setters are designed to securely hold stainless steel hex head screws and nuts using a ball with spring retention The Alloy-Steel body is designed to withstand the high torque (rotational force) of impact drivers, Impact Plus (Registered Trademark). Our lobular design reduces the stripping of the corners of the nut, fasteners are driven on their flat sides instead of their corners. IVY Classic Industries manufactures an extensive line of nut setters in a variety of sizes and lengths. IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools.
-
IVY Classic single-edge razor blades are made in the USA of high-carbon steel for long-life and durability. Their precision-honed sharpened edge is designed for clean accurate cutting and scraping smooth surfaces. The blades are constructed of high-carbon steel and steel-backed for extra rigidity. Each blade is individually wrapped for safety. The blades fit Ivy Classic razor blade Scraper (11156) and all single-edge razor blade tools. The blades are ideal for scraping and cleaning paint and labels from glass, tile and metal. Blades are .009" Thick. Ivy Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. -
IVY Classic Non-Magnetic Spring Nut Setters are designed to securely hold stainless steel hex head screws and nuts using a ball with spring retention The Alloy-Steel body is designed to withstand the high torque (rotational force) of impact drivers, Impact Plus (Registered Trademark). Our lobular design reduces the stripping of the corners of the nut, fasteners are driven on their flat sides instead of their corners. IVY Classic Industries manufactures an extensive line of nut setters in a variety of sizes and lengths. IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. -
- M2 high-speed steel drills produce perfectly round, burr-free holes. Precision ground with a bright finish, Premium Swift Bore (Registered Trademark)
- For drilling metal, wood and plastic in up to 1/8-inch thick material. Sizes laser-etched on bit for easy hole size identification
- 1/2-inch Tri-lobe shank won't slip in the drill chuck and split point provides fast penetration and accurate starting center without punch
- Cone shape of the bit adds strength and prevents bit flexing while drilling
- 5 Hole Sizes: 7/8, 1-1/8, 1-7/32, 1-1/4, 1-3/8-inch, Max Material Thickness: 1/8-inch, Shank: 1/2-inch tri-lobe
-
Ivy Classic heavy duty utility blades are made in the USA of high carbon steel for long-life and durability. Their precision-honed sharpened edge makes clean, accurate cuts. The edge can be re-sharpened. The blades cut drywall, roofing materials, Linoleum, carpet and vinyl. The blades fit all Ivy Classic retractable (11150, 11152, 11151), fixed (11154) and Folding (11145, 11146, 11147) utility knives and other standard utility knives. Blades are 0.025" Thick and have 2 notches. Ivy Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. -
IVY Classic Hanger Bolt Driver enables drills or impact drivers to drive hanger bolts and threaded rod. The internal threads and ball bearing stop at base of hanger bolt driver allow for easy thread release. Manufactured from alloy-steel for extra strength and durability, built to withstand the high torque (rotational force) of impact drivers, Impact Plus (Registered Trademark). IVY Classic Industries manufactures an extensive line of hanger bolt drivers in a variety of sizes and lengths. IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. -
Ivy Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. Ivy Classic Swift bore 4-inch forstner bit extensions extend any forstner shank bit an additional four inches. These extensions are constructed out of high carbon steel and come equipped with two set screws and a hex key. -
Metal/Stainless Steel Thin Cut-Off Blades - Swift Cut® Abrasive You are purchasing one five back.- Type 1 - For Cutting Only
- Designed to cut stainless steel, angle iron, sheet metal and other ferrous metal products, Swift Cut (Registered Trademark)
- Resin bonded Aluminum-Oxide grain for faster cutting, Type 1 blade - for cutting only
- Blade double reinforced with fiberglass mesh for durability and safety
- Arbor reinforced with metal for extra strength
- Diameter: 4-1/2-inch, Width: 0.047-inch, Arbor: 5/8-inch, Max RPM: 13,200
-
Sale!
STARRETT Adjustable Hacksaw Frame - MODEL: K152 Blade: 8", 10" or 12",200,250,300mm Throat Depth: 3-3/4",95mm
- Blades can be mounted in any one of four cutting directions.
- Furnished with one high speed steel blade.
- Throat Depth|Decimal Diameter 3-3/4" (95mm)
-
The high performance, universal system for interior construction and renovation with accessories for a wide range of applications.
-
The LU79 thin kerf line of saw blades provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. The combination of Hi-ATB tooth design and anti-vibration slots makes these thin kerf blades the ultimate finish blades. The result is a cut so smooth it eliminates the need for a stabilizer or a scoring blade!BulletsPremium TiCo™ HI-Density Carbide Crosscutting Blend for Maximum PerformanceHigh Alternate Top Bevel (HiATB)Tooth Design produces splinter-free cutsModified Triple Chip Grind (MTCG) Tooth Design for long life and chip free cuts in thick stock manmade materialsPerma-Shield™ Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.Country Of OriginItaly -
Out of stock
- Create 1/4-Inch, 3/8-Inch and 1/2-Inch (3/8-Inch drill bushings and drill bit included) dowel holes on the end or face of your work piece
- Locations of dowels can be pre-set in 1/8-Inch increment
- Built in alignment slot
- Included are (5) 3/8-Inch drill guides, 3/8-Inch drill bit, 3/8-Inch stop collar, and 3/8-Inch indexing pin
- Maximum edge to center distance for dowel holes is 3-1/2-Inch
-
The GrabberPLUS offers an upgraded safety solution to the Grabber family of Milescraft push blocks. It’s great for extra control when using router tables, table saws, jointers, and bandsaws. The high-friction, diamond grip prevents boards from slipping. The added spring-loaded retractable heels secure the ends of your workpiece and guide it through your cut. The GrabberPLUS is a must-have for every woodworker!Spring-Loaded, Retractable Locking Heels
- Increase control and stability during cuts to eliminate tear-out when ripping or routing
Diamond Grip Rubber Bottom
- Non-marring, non-slip TPE material provides maximum control to safely hold your workpiece in place
Ergonomic, Tilted, Comfort Grip Handle
- Provides superior control and maximum grip, while keeping your hands away from the cutting tool and providing increased directional force against the fence
Durable Body
- Provides maximum durability to safely control your workpiece in all applications
- High visibility yellow makes it easy to find in busy shops
Safety Tips
- Ensure GrabberPLUS is firmly and securely on the workpiece
- Ensure a safe distance between the saw blade and the edge of GrabberPLUS
- Always ensure sufficient downward, forward, and side pressure
- Check and clean diamond grip pad with compressed air, or if that is not available, with water and soap, as necessary
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov/product -
GrabberPRO is the ultimate adjustable push block. Ideal for use on table saws, router tables, jointers, and even band saws. Designed with control, precision, and safety in mind! The multi-leg design allows the GrabberPro to pass over both sides of a saw blade, keeping contact with the workpiece and helping reduce kickback. The inward, downward, and forward pressure provide superior control all the way through the cut, keeping you and your fingers protected. GrabberPRO is a must-have for every woodworker, whether you’re a DIY-er or a Pro! Adjustable Multi-Leg Design- 4 Adjustable and interchangeable legs let you customize the GrabberPro to suit your job
- Includes 1”, 1/2”, 1/4” and 1/8” Legs
- Cut clean, precise strips as small as 1/8” thick.
- Helps reduce kickback by maintaining contact on both sides of the blade through your cut
- Elevated base keeps hands further away from cutting surface for increased safety
- Handle design keeps constant downward, inward, and forward pressure on workpiece to safely finish cuts and prevent binding or kickback.
- Provides superior control and maximum grip, while keeping your hands angled away from the cutting tool
- Angled support foot can be lowered to support the GrabberPro for extra tall or thin cuts
- Maintains balanced, even contact with your workpiece
- Non-marring, TPE material provides maximum strength to safely hold your workpiece in place
- Easy to clean surface ensures your GrabberPRO won’t slip
- The Retractable Heel provides extra forward control during cuts
- Helps prevent tear-out
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov/product - 4 Adjustable and interchangeable legs let you customize the GrabberPro to suit your job
