- Type 1 - For Cutting Only
- Designed to cut stainless steel, angle iron, sheet metal and other ferrous metal products, Swift Cut (Registered Trademark)
- Resin bonded Aluminum-Oxide grain for faster cutting, Type 1 blade - for cutting only
- Blade double reinforced with fiberglass mesh for durability and safety
- Arbor reinforced with metal for extra strength
- Diameter: 4-1/2-inch, Width: 0.047-inch, Arbor: 5/8-inch, Max RPM: 13,200
-
Band Saw Blades (3)
-
Saw Blades (18)
-
Metal/Stainless Steel Thin Cut-Off Blades - Swift Cut® Abrasive You are purchasing one five back. -
- Carbide tipped cutting edge for up to 50X cutting life versus standard pruning blades
- Ultimate cutting performance in clean wood and pruning applications
- Aggressive Carbide tooth geometry delivers fast and effortless cuts
- Large blade gullets between teeth provide fast chip removal
- 3 Pack
-
Sale!
STARRETT Adjustable Hacksaw Frame - MODEL: K152 Blade: 8", 10" or 12",200,250,300mm Throat Depth: 3-3/4",95mm
- Blades can be mounted in any one of four cutting directions.
- Furnished with one high speed steel blade.
- Throat Depth|Decimal Diameter 3-3/4" (95mm)
-
Diablo’s 7-1/4" x 60-Tooth ATB Ultra Finish Saw Blade is ideal for ultra-finish crosscuts and rip cuts in wood, plywood, and melamine. The blade’s teeth are made of TiCo Hi-Density carbide for long-lasting durability. Cut from hardcore steel with high precision lasers, the blade's thin kerf design provides fast, effortless cuts. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. TiCo Hi-Density Carbide Teeth Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo – a combination of titanium and cobalt. TiCo Hi-Density Carbide tipped teeth provide maximum performance and cutting life. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool. Built for Accuracy The 5/8" diamond twist out arbor allows for accurate blade rotation reducing vibration and premature wear. Tri-metal shock-resistant brazing allows the carbide tips to withstand extreme impact for maximum durability. The blade produces a remarkably clean, chip-free cut that requires little to no sanding. Reduced Friction A permanent Perma-SHIELD non-stick coating protects the blade from heat and corrosion, reduces friction and pitch buildup. -
Ideal for cutting Steel Studs, Angle Iron*, Flat Bar*, Channel*, EMT Conduit, All-thread** Note: *Mild Steel only - 1/8" max. wall thickness **Mild steel only - 1" max diameterSteel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades. With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts. Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades.- TiCo Hi-Density Carbide specifically designed for metal cutting
- Triple Chip Design for longer cutting life in metal
- Laser cut stabilizer vents trap noise and vibration and stabilize blade
- Tri-metal shock-resistant brazing for stronger carbide teeth.
- Perma-Shield Non-Stick Coating reduces friction & heat build up
-
The LU79 thin kerf line of saw blades provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. The combination of Hi-ATB tooth design and anti-vibration slots makes these thin kerf blades the ultimate finish blades. The result is a cut so smooth it eliminates the need for a stabilizer or a scoring blade!BulletsPremium TiCo™ HI-Density Carbide Crosscutting Blend for Maximum PerformanceHigh Alternate Top Bevel (HiATB)Tooth Design produces splinter-free cutsModified Triple Chip Grind (MTCG) Tooth Design for long life and chip free cuts in thick stock manmade materialsPerma-Shield™ Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.Country Of OriginItaly -
Freud's® best choice for your miter saw. This blade leaves a smooth cut in a variety of applications. Ideal for cutting finished oak, pine, plywood, pressure-treated lumber and beams.Thin kerf design removes less material and produces less drag on your saw's motor, thus extending time between overhauls. Tips are thick enough to be resharpened but the blade is affordable enough to treat as a disposable. -
- Special Tico Carbide formula offers a blend of carbide with low Cobalt content that produces a very "hard" carbide for long cutting life.
- This blade features a thin kerf triple chip design that is specially designed to cut laminate flooring (Pergo, Armstrong, Swiftlock), double-sided laminates and melamine cleanly
- Features Freud's Perma-Shield coating, Anti-Vibration reeds, Heat Expansion slots, and Laser Cut technologies.
- Thin kerf design to increase machine performance. Ideal for sliding mitre saws and underpowered table saws.
-
Out of stock
Features
- Genuine Delta parts. No knock offs here!
- Double-edged and reversible knives provide up to twice the cutting life
- Includes three knives
- Fits DELTA® 22-590 13 in. Portable Planer
Specs
- Quantity: 3 Knives
-
Diablo's general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades, or make quality crosscuts in solid wood or plywood. Great for both sliding and “chop” style miter saws as well as table saws. -
Diablo’s new Ultimate Polished Finish saw blades feature Axial Shear Face Grind (ASFG) that cleanly shears through materials for superior quality finishes on fine molding, hardwoods, softwoods, veneered plywood, melamine and more. Also featuring Double-Side Grind tooth geometry, an incredible 200 additional grinds, this blade produces precise, polished-like cuts equal to that of 220-grit sandpaper or higher. Diablo’s proprietary TiCo Hi-Density Carbide is designed specifically to deliver extreme durability and 5X longer life on materials requiring polished-like finishes. Unlike other blades on the market, Diablo’s Ultimate Polished Finish saw blades have a laser-cut, ultra-thin kerf blade design for fast, effortless cuts on corded or cordless saws making this the go-to blade when working at a permanent location or at a portable jobsite. Diablo’s new Ultimate Polished Finish saw blades are REDefining cutting by introducing radical technology to maximize performance and extend cutting life, saving the PRO both time and money when completing their projects. -
Freud's® best choice for cabinet makers. I especially like these blades because they leave a velvety finish with little to no need for sanding and are ideal for crosscutting finished oak, pine, melamine, veneer plywood and delicate moulding.Specifications:Durable MicroGrain Titanium Carbide teeth for razor-sharp cuts and long life.Perma-SHIELD® permanent coating prevents gumming and corrosion.Laser-cut thin kerf design gives fast & clean cuts. Laser-cut stabilizer vents give reduced vibration and precise cuts.Covered by Freud®'s Limited Lifetime Warranty.Freud® Part No. D1296NDia: 12"No.Teeth 96TCGHook Angle: -5 degreesArbor: 1"Kerf: 0.091Plate: 0.071 -
Out of stock
Easily convert your JET Tablesaw to accommodate a Dado blade -
Clean edges, square shoulders, and flat bottoms: the Freud SD208 Eight-Inch Professional Dado Set cuts with ultimate precision, so you can achieve them all. This is your go-to set for efficiently creating dadoes and grooves in a wide range of materials from hardwood to laminate. Boasting thick MicroGrain carbide tips and an anti-kickback design, the set's two outside blades can be resharpened for long-term accuracy. For added versatility, the kit cuts grooves spanning 1/4 to 7/8 inch and includes a shim set.The perfect dado set for the fine cabinetmaker or weekend woodworker, the Freud SD208 produces dadoes and grooves that meet with flush, even edges. So you can be assured of precise cuts every time, the set is equipped with precision-grade features, starting with two proprietary outside blades that can be resharpened to deliver accuracy for the long term.These high-quality eight-inch, 12-tooth blades with 5/8-inch arbors cut dadoes and grooves that are clean, flat, and virtually splinter free. Cuts made by these blades are accurate the first time, saving you from making repeated passes over the same workpiece. -
Out of stock
With this one all purpose blade you can rip & crosscut 2" - 3" thick hardwoods resulting in a smooth-as-sanded surface -
Out of stock
This blade for table and radial arm saws produces chipless, scratch-free, polished trim and cross cuts on hardwoods, softwoods, and plywoods. Its thin kerf reduces wood loss by 1/4, lessens "jump in" for better pull control, and virtually eliminates splintering and fuzz. -
Out of stock
Replacement Blade for JET 7" x 12" Horz/Vert Bandsaw- 3/4" x .035" x 93" x 6/10VT - Bi-Metal -
Out of stock
This blade produces chipless, scratch-free, polished trim and cross cuts on hardwoods, softwoods, and plywoods. Its thin kerf reduces wood loss by 1/4, lessens "jump in" for better pull control, and virtually eliminates splintering and fuzz. -
Out of stock
This is Forrest's most popular blade. With this one all purpose blade you can RIP & CROSSCUT 1˝ - 2˝ ROCKHARDS and SOFTWOODS resulting in a smooth as sanded surface virtually without splinters. FEATURES: • 20° Face Hook for easy feed. • Our DOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings • Ends blade changing (one blade does rip, combo and crosscut). • Ends scratchy saw cuts • Ends second-step finishing • Ends cutting 1/16˝ oversize to allow for RESURFACING • Buy and Sharpen ONE blade instead of 3: (24T Rip, 50T Combination, 80T Crosscut) • Use 30T version if ripping mostly 2˝-3˝ Thick hardwoods • Side wobble is held to .001˝ - with other brands .004/.010 is common! • RAISE the blade for THICK woods. LOWER the blade for THIN woods and get perfect cuts every time. • Specially engineered clearances on the carbide teeth can totally eliminate side scoring. The result…no planing/jointing or sanding. In many cases a glue-line cut can be obtained, depending on the accuracy of the saw machine • Optional thin-kerf 3/32˝ width blades are available in 10˝ diameter for EASIER CUTTING with minimum power saw machines. They also remove 25% less material. -
The "Ultimate German carbide tipped re-saw blade".The Resaw King is the world's finest resaw blade. Manufactured with C4 carbide teeth, this blade allows you to cut ultra-smooth, wafer-thin veneers with minimal waste. Woodworkers demanding the very best will be impressed. The triple vari-tooth design minimizes vibration and lowers harmonics. Teeth are individually brazed and ground to perfection using diamond wheels on our custom Shark grinder designed exclusively for this blade. The backing is made from 0.024"Swedish Silicon steel, deep gullets are designed to quickly disperse chips allowing for faster feed rates. The Carbide-Tipped Resaw King can be re-sharpened up to 4 times. The Resaw King is the ideal blade for anyone cutting hardwoods or exotics, providing ultra-smooth cut quality with exceptional yield. The Resaw King is manufactured by our partners in Germany exclusively for Laguna Tools, welded and finish ground in California using the latest technology. -
The resaw king is perhaps the world's finest resaw blade. Manufactured with C4 carbide teeth, this blade allows you to cut ultra-smooth, wafer-thin veneers with minimal waste. Woodworkers demanding the best will be impressed. The triple var-tooth design minimizes vibration and lowers harmonics. The teeth are individually brazed and ground to perfection using diamond wheels on our custom-built shark grinder designed exclusively for this blade. -
This 3" Segmented Diamond oscillating saw blade is ideal for removal of hardened, epoxy resin grout lines. Also suitable for very hard cement grouts or when carbide is just not holding up on those big jobs. The right choice for demanding and long jobs. Kerf is 3/32" for your standard grout lines. Fits all oscillating tools due to the Starlock system. -
- Five Pack Includes MultiMaster 2-1/2-in Diamond Segment Saw Blade - 63502114017
- Durable Cutting Surface
- For Marble and Concrete
- Size: 2 1/2" Diameter
- Genuine Fein Product